DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 100-E38KN400 direct-on-line contactor has 4 normally open contacts. It is a member of the Allen-Bradley IEC 100 Contactors series. Its rated coil voltage is 250 to 500 Volts AC/DC.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 100-E38KN400. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-E38KN400 |
Product Type | Direct-On-Line Contactor |
Number of Poles | 4 |
NO Contacts | 4 |
NC Contacts | None |
Coil Voltage | 250 to 500 Volts AC/DC |
Mechanical Interlocking Mechanism | Supported |
Mechanical and Electrical Interlocking Mechanism | Supported |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-E38KN400 |
Product Type | Direct-On-Line Contactor |
Number of Poles | 4 |
NO Contacts | 4 |
NC Contacts | None |
Coil Voltage | 250 to 500 Volts AC/DC |
Mechanical Interlocking Mechanism | Supported |
Mechanical and Electrical Interlocking Mechanism | Supported |
The 100-E38KN400 direct-on-line contactor from Allen-Bradley/Rockwell Automation is designed and manufactured as part of the IEC 100 Contactors series with 4 poles that are all normally open. It does not come with normally open or normally closed auxiliary contacts built into it. The 100-E38KN400 direct-on-line contactor uses AC and DC voltage. When it operates at 40 degrees Celsius with an AC-1 motor that is rated at 690 Volts, this direct-on-line contactor has an operating current rating of 55 Amps. It also has an operating current rating of 55 Amps at 40 degrees Celsius when it operates with general-use industrial motors that are UL rated, protected by enclosures, and rated at 600 Volts. The coil voltage range for the 100-E38KN400 direct-on-line contactor is from 250 to 500 Volts AC/DC.
The Allen-Bradley/Rockwell Automation 100-E38KN400 4-pole direct-on-line contactor from the IEC 100 Contactors series has been designed to operate with a low power consumption rating in order to be as environmentally friendly and efficient as possible. In some applications, the 100-E38KN400 direct-on-line contactor can be connected to another contactor with an interlocking mechanism. The basic compatible interlocking mechanism is mechanical-only with 2 fixing clips for mechanical connections but no electrical connecting or interlocking hardware. Another type of interlocking mechanism that is available for the 100-E38KN400 4-pole direct-on-line contactor is both mechanical and electrical. The mechanical and electrical interlocking type of mechanism comes with both the 2 mechanical fixing clips and with an electrical interlock block that supports A2-A2 types of connections. This contactor can also connect to electronic timing modules for the ON delay and OFF delay.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 100-E38KN400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-E38KN400 |
Product Type | Direct-On-Line Contactor |
Number of Poles | 4 |
NO Contacts | 4 |
NC Contacts | None |
Coil Voltage | 250 to 500 Volts AC/DC |
Mechanical Interlocking Mechanism | Supported |
Mechanical and Electrical Interlocking Mechanism | Supported |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | IEC 100 Contactors |
Part Number | 100-E38KN400 |
Product Type | Direct-On-Line Contactor |
Number of Poles | 4 |
NO Contacts | 4 |
NC Contacts | None |
Coil Voltage | 250 to 500 Volts AC/DC |
Mechanical Interlocking Mechanism | Supported |
Mechanical and Electrical Interlocking Mechanism | Supported |
The 100-E38KN400 direct-on-line contactor from Allen-Bradley/Rockwell Automation is designed and manufactured as part of the IEC 100 Contactors series with 4 poles that are all normally open. It does not come with normally open or normally closed auxiliary contacts built into it. The 100-E38KN400 direct-on-line contactor uses AC and DC voltage. When it operates at 40 degrees Celsius with an AC-1 motor that is rated at 690 Volts, this direct-on-line contactor has an operating current rating of 55 Amps. It also has an operating current rating of 55 Amps at 40 degrees Celsius when it operates with general-use industrial motors that are UL rated, protected by enclosures, and rated at 600 Volts. The coil voltage range for the 100-E38KN400 direct-on-line contactor is from 250 to 500 Volts AC/DC.
The Allen-Bradley/Rockwell Automation 100-E38KN400 4-pole direct-on-line contactor from the IEC 100 Contactors series has been designed to operate with a low power consumption rating in order to be as environmentally friendly and efficient as possible. In some applications, the 100-E38KN400 direct-on-line contactor can be connected to another contactor with an interlocking mechanism. The basic compatible interlocking mechanism is mechanical-only with 2 fixing clips for mechanical connections but no electrical connecting or interlocking hardware. Another type of interlocking mechanism that is available for the 100-E38KN400 4-pole direct-on-line contactor is both mechanical and electrical. The mechanical and electrical interlocking type of mechanism comes with both the 2 mechanical fixing clips and with an electrical interlock block that supports A2-A2 types of connections. This contactor can also connect to electronic timing modules for the ON delay and OFF delay.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 100-E38KN400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 100-E38KN400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.