100-E38KY200 | Allen Bradley PLC IEC 100 Contactors

100-E38KY200

100-E38KY200

Description:

The Allen-Bradley 100-E38KY200 Contactor is a 4-pole direct-on-line electronic contactor. It is part of the IEC 100 Contactors series. The 100-E38KY200 Contactor has 2 normally closed main contacts and 2 normally open main contacts.

Rated 4.8 with 9 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E38KY200

Add more parts to quote

Description:

The Allen-Bradley 100-E38KY200 Contactor is a 4-pole direct-on-line electronic contactor. It is part of the IEC 100 Contactors series. The 100-E38KY200 Contactor has 2 normally closed main contacts and 2 normally open main contacts.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E38KY200.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 9 reviews

    Technical Specifications for 100-E38KY200

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E38KY200
DescriptionAC/DC-Operated Contactor
Operating Temperature-40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage48 to 130 Volts AC/DC
PLC InterfaceNone
Number of Poles4 Poles
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E38KY200
DescriptionAC/DC-Operated Contactor
Operating Temperature-40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage48 to 130 Volts AC/DC
PLC InterfaceNone
Number of Poles4 Poles
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X
s

About 100-E38KY200

The Allen-Bradley 100-E38KY200 Compact IEC 100 Contactor is a DIN Rail/panel-mounted AC/DC contactor from the 100E line in the IEC 100 Contactors series. The 100-E38KY200 Contactor is designed with a universal AC/DC electronic coil that is controlled by a separate and lower voltage than the motor’s switching voltage. The coil control voltage ranges from 48 to 130 Volts AC at 50/60 Hertz coil frequency or from 48 to 130 Volts DC. The 100-E38KY200 Contactor’s electronic AC/DC coil has Class F insulation that provides thermal stability at up to 180 degrees Celsius at its full load ratings. On the contactor’s main circuit, there are 4 main contacts with screw-type terminals. The main contacts consist of 2 Normally Closed (NC) contacts and 2 Normally Open (NO) contacts. The screw-type terminals are easy to use and they provide fast and easy wiring connections for the field-side wiring.



The Allen-Bradley 100-E38KY200 IEC 100 Contactor has an operating voltage range between 115 Volts AC and 575 Volts AC or 24 Volts DC and 440 Volts DC. The 100-E38KY200 Contactor also has a built-in voltage suppression circuit, and it provides an electrical isolation voltage rating of up to 690 Volts. It also provides a rated impulse voltage withstand of up to 6000 Volts. The 100-E38KY200 Contactor is designed for high vibration levels and extreme industrial conditions. It has a wide ambient operating temperature range between -40 and 70 degrees Celsius and a storage temperature range of -60 to 80 degrees Celsius. The 100-E38KY200 Contactor comes with an IP2X rated insulated housing that protects the device against tampering and prevents the operators from touching the internal contacts.



Repair Services for 100-E38KY200

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E38KY200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E38KY200

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E38KY200

Resolutions For 100-E38KY200

About

Technical Specifications for 100-E38KY200

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E38KY200
DescriptionAC/DC-Operated Contactor
Operating Temperature-40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage48 to 130 Volts AC/DC
PLC InterfaceNone
Number of Poles4 Poles
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E38KY200
DescriptionAC/DC-Operated Contactor
Operating Temperature-40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage48 to 130 Volts AC/DC
PLC InterfaceNone
Number of Poles4 Poles
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X

About 100-E38KY200

The Allen-Bradley 100-E38KY200 Compact IEC 100 Contactor is a DIN Rail/panel-mounted AC/DC contactor from the 100E line in the IEC 100 Contactors series. The 100-E38KY200 Contactor is designed with a universal AC/DC electronic coil that is controlled by a separate and lower voltage than the motor’s switching voltage. The coil control voltage ranges from 48 to 130 Volts AC at 50/60 Hertz coil frequency or from 48 to 130 Volts DC. The 100-E38KY200 Contactor’s electronic AC/DC coil has Class F insulation that provides thermal stability at up to 180 degrees Celsius at its full load ratings. On the contactor’s main circuit, there are 4 main contacts with screw-type terminals. The main contacts consist of 2 Normally Closed (NC) contacts and 2 Normally Open (NO) contacts. The screw-type terminals are easy to use and they provide fast and easy wiring connections for the field-side wiring.



The Allen-Bradley 100-E38KY200 IEC 100 Contactor has an operating voltage range between 115 Volts AC and 575 Volts AC or 24 Volts DC and 440 Volts DC. The 100-E38KY200 Contactor also has a built-in voltage suppression circuit, and it provides an electrical isolation voltage rating of up to 690 Volts. It also provides a rated impulse voltage withstand of up to 6000 Volts. The 100-E38KY200 Contactor is designed for high vibration levels and extreme industrial conditions. It has a wide ambient operating temperature range between -40 and 70 degrees Celsius and a storage temperature range of -60 to 80 degrees Celsius. The 100-E38KY200 Contactor comes with an IP2X rated insulated housing that protects the device against tampering and prevents the operators from touching the internal contacts.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E38KY200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E38KY200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF