100-E38QJ400

The Allen-Bradley 100-E38QJ400 Large Frame IEC 100 Series Contactor is a 3-pole contactor from the IEC 100 Contactors series that is designed for large frame switching applications. Despite its large frame, the 100-E38QJ400 Contactor features a compact design with reduced weight and dimensions to save both panel space and installation costs. The 100-E38QJ400 Contactor has 4 main poles with standard screw-type terminals for quick field wiring. Each connector pole is a Normally Open (NO) contact that can be wired for direct-on-line connections. The 100-E38QJ400 Contactor has a switching voltage range of 115 Volts AC to 575 Volts AC/24 Volts DC to 440 Volts DC. It has a maximum current rating of 38 Amps (55 Amps at 690 Volts AC) and a maximum output power rating of 30 Horsepower.

The Allen-Bradley 100-E38QJ400 Contactor has a low consumption/faster drop-out DC contactor coil without a PLC interface. The contactor coil is energized by a different and lower voltage rating than the motor’s switching voltage. The coil also has a switching voltage rating of 24 Volts DC and an insulation class of Class F per the IEC standards. The 100-E38QJ400 Contactor offers circuit isolation ratings of up to 690 Volts AC and an impulse voltage withstand of 6000 Volts. The 100-E38QJ400 Contactor is built to operate at -40 to 70 degrees Celsius. It has a maximum operating altitude of 3000 meters and it can be used in high-vibration industrial conditions. The 100-E38QJ400 Contactor has an IP2X industrial enclosure rating. This enclosure provides an insulated housing for all the contacts and the coil, as well as protection against electric shocks that may occur if the users touch the contacts. The 100-E38QJ400 Contactor supports cabinet installation and it can be installed on a panel or a DIN Rail.