100-E40KD400 | Allen Bradley PLC IEC 100 Contactors

100-E40KD400

100-E40KD400

Description:

The Allen-Bradley/Rockwell Automation 100-E40KD400 contactor is a 4-pole contactor with 4 normally open contacts. It is manufactured as part of the Allen-Bradley IEC 100 Contactors series. The 100-E40KD400 contactor can operate at 60 or 70 Amps of rated current.

Rated 4.8 with 18 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 100-E40KD400

Add more parts to quote

Description:

The Allen-Bradley/Rockwell Automation 100-E40KD400 contactor is a 4-pole contactor with 4 normally open contacts. It is manufactured as part of the Allen-Bradley IEC 100 Contactors series. The 100-E40KD400 contactor can operate at 60 or 70 Amps of rated current.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E40KD400.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 18 reviews

    Technical Specifications for 100-E40KD400

ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E40KD400
Product TypeDirect-On-line Contactor
Number of Poles4
NO Contacts4
NC Contacts0
Rated Current60 or 70 Amps
Wye-Delta Power Wiring KitsSupported
Mechanical Interlocking MechanismsSupported
ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E40KD400
Product TypeDirect-On-line Contactor
Number of Poles4
NO Contacts4
NC Contacts0
Rated Current60 or 70 Amps
Wye-Delta Power Wiring KitsSupported
Mechanical Interlocking MechanismsSupported
s

About 100-E40KD400

The 100-E40KD400 contactor is a 4-pole contactor from the Allen-Bradley/Rockwell Automation IEC 100 Contactors series. This 4-pole contactor can use AC voltage and DC voltage and it is a direct-on-line contactor which has 4 poles or main contacts that are all NO or normally open contacts. The 100-E40KD400 contactor does not have any NC or normally closed main contacts and it does not have auxiliary contacts unless it is connected to an optional auxiliary contact block. This 4-pole contactor can sustain a current rating of 60 Amps at a voltage rating of 600 Volts and an ambient temperature of 40 degrees Celsius and a current rating of 70 Amps at a voltage rating of 690 Volts and an ambient temperature of 40 degrees Celsius.



 



The coil voltage rating for the Allen-Bradley/Rockwell Automation 100-E40KD400 4-pole contactor from the IEC 100 Contactors series is from 100 to 250 Volts AC/DC. Some applications require 2 contactors to be interlocked with each other while operating, and the 100-E40KD400 contactor supports interlocked operation with compatible IEC 100 series contactors that it connects to with an interlocking mechanism. The compatible interlocking mechanism for this contactor is strictly mechanical, with 2 fixing clips but no auxiliary contacts or support for electronic connections. Terminal shrouds are another type of available optional accessory for the 100-E40KD400 4-pole contactor, and they provide an IP 20 level of protection against direct contact after the contactor terminals have been wired. This contactor can also be used with Wye-Delta power wiring kits in Allen-Bradley Wye-Delta systems and applications.



Repair Services for 100-E40KD400

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E40KD400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E40KD400

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E40KD400

Resolutions For 100-E40KD400

About

Technical Specifications for 100-E40KD400

ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E40KD400
Product TypeDirect-On-line Contactor
Number of Poles4
NO Contacts4
NC Contacts0
Rated Current60 or 70 Amps
Wye-Delta Power Wiring KitsSupported
Mechanical Interlocking MechanismsSupported
ManufacturerAllen-Bradley/Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E40KD400
Product TypeDirect-On-line Contactor
Number of Poles4
NO Contacts4
NC Contacts0
Rated Current60 or 70 Amps
Wye-Delta Power Wiring KitsSupported
Mechanical Interlocking MechanismsSupported

About 100-E40KD400

The 100-E40KD400 contactor is a 4-pole contactor from the Allen-Bradley/Rockwell Automation IEC 100 Contactors series. This 4-pole contactor can use AC voltage and DC voltage and it is a direct-on-line contactor which has 4 poles or main contacts that are all NO or normally open contacts. The 100-E40KD400 contactor does not have any NC or normally closed main contacts and it does not have auxiliary contacts unless it is connected to an optional auxiliary contact block. This 4-pole contactor can sustain a current rating of 60 Amps at a voltage rating of 600 Volts and an ambient temperature of 40 degrees Celsius and a current rating of 70 Amps at a voltage rating of 690 Volts and an ambient temperature of 40 degrees Celsius.



 



The coil voltage rating for the Allen-Bradley/Rockwell Automation 100-E40KD400 4-pole contactor from the IEC 100 Contactors series is from 100 to 250 Volts AC/DC. Some applications require 2 contactors to be interlocked with each other while operating, and the 100-E40KD400 contactor supports interlocked operation with compatible IEC 100 series contactors that it connects to with an interlocking mechanism. The compatible interlocking mechanism for this contactor is strictly mechanical, with 2 fixing clips but no auxiliary contacts or support for electronic connections. Terminal shrouds are another type of available optional accessory for the 100-E40KD400 4-pole contactor, and they provide an IP 20 level of protection against direct contact after the contactor terminals have been wired. This contactor can also be used with Wye-Delta power wiring kits in Allen-Bradley Wye-Delta systems and applications.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E40KD400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E40KD400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF