Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors 100-E40KN400

Product image is representative; revision or series may vary. Contact us to request a specific version.

100-E40KN400

|
Need a Specific Revision?

The 100-E40KN400 contactor is an IEC 100 series contactor unit manufactured by Allen-Bradley/Rockwell Automation. The 100-E40KN400 contactor has 4 poles and it is a direct-on-line unit that can operate on both AC and DC power sources. The unit has a rated current of 60 Amps at 600 Volts and 70 Amps at 690 Volts.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 100-E40KN400

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 100 Contactors
Part Number100-E40KN400
Weight25.00 lbs (11.34 kg)
Number of Poles4
Type of ContactorDirect-On-Line Contactor
Rated isolation voltage (IEC)690 Volts
Rated isolation voltage (UL, CSA)600 Volts
Rated operational current at 690 Volts (AC-1)70 Amps
Rated operational current at 600 Volts (UL General Use)60 Amps
Main Poles4 N.O.
Auxiliary Contacts0 N.O. / 0 N.C.
Coil voltage250 to 500 Volts AC/DC
AC voltage frequency50 to 60 Hertz
Request a Repair

The product code 100-E40KN400 is the catalog number for an Allen-Bradley/Rockwell Automation IEC 100 series contactor that has been manufactured for industrial applications where safety is a priority. This highly reliable component is part of the Allen-Bradley IEC 100 and 100-E/104-E series and it operates as a direct-on-line contactor. The contactor is built for operation under tough conditions and it has an IP2X rated housing that protects it. The 100-E40KN400 contactor can be installed at a maximum altitude of 3000 meters above sea level and it meets the Category B climatic withstand standards according to the IEC 60947-1, Annex Q standards. The operating temperature range of the contactor is from -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit). In addition to that, the unit can be stored at a temperature range of -60 to 80 degrees Celsius (-76 to 176 degrees Fahrenheit).

The Allen-Bradley/Rockwell Automation 100-E40KN400 IEC 100 series contactor has 4 poles and a rated isolation voltage of 690 Volts (per the IEC standards) and 600 Volts (per the UL/CSA standards). The rated operational current at 690 Volts for AC-1 applications is 70 Amps and it is 60 Amps at 600 Volts for UL general-use applications. The 100-E40KN400 contactor unit includes 4 normally open and 0 normally closed main poles. This contactor does not include any auxiliary contacts. The coil voltage rating of this contactor is between 250 and 500 Volts AC/DC. The rated frequency for AC operation is 50 to 60 Hertz. The rated impulse voltage of the 100-E40KN400 contactor is 6 kilovolts and the unit has a Class F coil insulation rating per the IEC 60947-4-1 standards. The contactor is resistant to shock according to the IEC 60068-2-27 standards and resistant to vibration according to the IEC 60068-2-6 standards.