100-E460EN11 | Allen Bradley PLC IEC 100 Contactors

100-E460EN11

100-E460EN11

Description:

The Allen-Bradley/Rockwell Automation IEC 100 contactor with the product code 100-E460EN11 has 3 poles and  isolation voltage ratings of 400 Volts (AC-3) and 690 Volts (AC-1). The rated operational current of the unit is 460 Amps at 400 Volts and 700 Amps at 690 Volts. The 100-E460EN11 contactor has 1 normally open and 1 normally closed auxiliary contact and it features 250 to 500 Volts AC/DC coil voltage.

Rated 4.6 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E460EN11

Add more parts to quote

Description:

The Allen-Bradley/Rockwell Automation IEC 100 contactor with the product code 100-E460EN11 has 3 poles and  isolation voltage ratings of 400 Volts (AC-3) and 690 Volts (AC-1). The rated operational current of the unit is 460 Amps at 400 Volts and 700 Amps at 690 Volts. The 100-E460EN11 contactor has 1 normally open and 1 normally closed auxiliary contact and it features 250 to 500 Volts AC/DC coil voltage.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E460EN11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 20 reviews

    Technical Specifications for 100-E460EN11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E460EN11
Number of Poles3
Type of ProductDirect-On-Line Contactor
Rated isolation voltage (AC-3)400 Volts
Rated Isolation voltage (AC-1)690 Volts
Rated operational current at 400 Volts (AC-3)460 Amps
Rated operational current at 690 Volts (AC-1)700 Amps
Ratings for switching AC motors at 220 to 240 Volts132 kilowatts
Ratings for switching AC motors at 380 to 400 Volts, 415 Volts and 440 Volts250 kilowatts
Ratings for switching AC motors at 500 Volts315 kilowatts
Ratings for switching AC motors at 690 Volts355 kilowatts
Ratings for switching AC motors at 1000 Volts280 kilowatts
Auxiliary Contacts1 N.O.,1 N.C.
Coil Voltage250 to 500 Volts AC/DC
AC Voltage Frequency50 to 60 Hertz
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E460EN11
Number of Poles3
Type of ProductDirect-On-Line Contactor
Rated isolation voltage (AC-3)400 Volts
Rated Isolation voltage (AC-1)690 Volts
Rated operational current at 400 Volts (AC-3)460 Amps
Rated operational current at 690 Volts (AC-1)700 Amps
Ratings for switching AC motors at 220 to 240 Volts132 kilowatts
Ratings for switching AC motors at 380 to 400 Volts, 415 Volts and 440 Volts250 kilowatts
Ratings for switching AC motors at 500 Volts315 kilowatts
Ratings for switching AC motors at 690 Volts355 kilowatts
Ratings for switching AC motors at 1000 Volts280 kilowatts
Auxiliary Contacts1 N.O.,1 N.C.
Coil Voltage250 to 500 Volts AC/DC
AC Voltage Frequency50 to 60 Hertz
s

About 100-E460EN11

The 100-E460EN11 contactor is an IEC 100 series direct-on-line contactor that has been designed and manufactured by Allen-Bradley/Rockwell Automation. The unit is part of the 100-E product series and it is made in accordance with standards like the CCC, UL, cULus, EAC, CSA, RCM, KC, CE, and similar standards. The 100-E460EN11 contactor uses an ambient temperature range of -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit) for standard operation. The specified operating temperature range for storage is the same as the one for operation. The 100-E460EN11 direct-on-line contactor has a Category B climatic withstand rating according to the IEC 60947-1 (Annex Q) standards and it can operate at a maximum altitude of 3000 meters. 



The 100-E460EN11 contactor has 3 poles and a rated isolation voltage of 400 Volts (AC-3) and 690 Volts (AC-1). In addition to that, the rated isolation voltage according to the IEC standards is 1000 Volts and it is 600 Volts according to the UL and CSA standards. The 100-E460EN11 contactor has a rated impulse voltage of 8 kilovolts and it is built in accordance with the IEC 60947-1 (Environment A and B) standard for electromagnetic compatibility. The 100-E460EN11 contactor is an IP 00 rated unit but its contactor coil terminals and auxiliary contacts can have an IP2X protection rating in a connected state. The 100-E460EN11 contactor has 1 N.O. and 1 N.C. auxiliary contacts and it features a coil voltage range of 250 to 500 Volts AC/DC with 50 to 60 Hertz AC frequency. The rated current of the unit ranges from 460 to 700 Amps, depending on the voltage source. The output power ratings for switching AC motors with the 100-E460EN11 contactor are 132 to 355 kilowatts and 150 to 500 Horsepower.



Repair Services for 100-E460EN11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E460EN11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E460EN11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E460EN11

Resolutions For 100-E460EN11

About

Technical Specifications for 100-E460EN11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E460EN11
Number of Poles3
Type of ProductDirect-On-Line Contactor
Rated isolation voltage (AC-3)400 Volts
Rated Isolation voltage (AC-1)690 Volts
Rated operational current at 400 Volts (AC-3)460 Amps
Rated operational current at 690 Volts (AC-1)700 Amps
Ratings for switching AC motors at 220 to 240 Volts132 kilowatts
Ratings for switching AC motors at 380 to 400 Volts, 415 Volts and 440 Volts250 kilowatts
Ratings for switching AC motors at 500 Volts315 kilowatts
Ratings for switching AC motors at 690 Volts355 kilowatts
Ratings for switching AC motors at 1000 Volts280 kilowatts
Auxiliary Contacts1 N.O.,1 N.C.
Coil Voltage250 to 500 Volts AC/DC
AC Voltage Frequency50 to 60 Hertz
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E460EN11
Number of Poles3
Type of ProductDirect-On-Line Contactor
Rated isolation voltage (AC-3)400 Volts
Rated Isolation voltage (AC-1)690 Volts
Rated operational current at 400 Volts (AC-3)460 Amps
Rated operational current at 690 Volts (AC-1)700 Amps
Ratings for switching AC motors at 220 to 240 Volts132 kilowatts
Ratings for switching AC motors at 380 to 400 Volts, 415 Volts and 440 Volts250 kilowatts
Ratings for switching AC motors at 500 Volts315 kilowatts
Ratings for switching AC motors at 690 Volts355 kilowatts
Ratings for switching AC motors at 1000 Volts280 kilowatts
Auxiliary Contacts1 N.O.,1 N.C.
Coil Voltage250 to 500 Volts AC/DC
AC Voltage Frequency50 to 60 Hertz

About 100-E460EN11

The 100-E460EN11 contactor is an IEC 100 series direct-on-line contactor that has been designed and manufactured by Allen-Bradley/Rockwell Automation. The unit is part of the 100-E product series and it is made in accordance with standards like the CCC, UL, cULus, EAC, CSA, RCM, KC, CE, and similar standards. The 100-E460EN11 contactor uses an ambient temperature range of -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit) for standard operation. The specified operating temperature range for storage is the same as the one for operation. The 100-E460EN11 direct-on-line contactor has a Category B climatic withstand rating according to the IEC 60947-1 (Annex Q) standards and it can operate at a maximum altitude of 3000 meters. 



The 100-E460EN11 contactor has 3 poles and a rated isolation voltage of 400 Volts (AC-3) and 690 Volts (AC-1). In addition to that, the rated isolation voltage according to the IEC standards is 1000 Volts and it is 600 Volts according to the UL and CSA standards. The 100-E460EN11 contactor has a rated impulse voltage of 8 kilovolts and it is built in accordance with the IEC 60947-1 (Environment A and B) standard for electromagnetic compatibility. The 100-E460EN11 contactor is an IP 00 rated unit but its contactor coil terminals and auxiliary contacts can have an IP2X protection rating in a connected state. The 100-E460EN11 contactor has 1 N.O. and 1 N.C. auxiliary contacts and it features a coil voltage range of 250 to 500 Volts AC/DC with 50 to 60 Hertz AC frequency. The rated current of the unit ranges from 460 to 700 Amps, depending on the voltage source. The output power ratings for switching AC motors with the 100-E460EN11 contactor are 132 to 355 kilowatts and 150 to 500 Horsepower.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E460EN11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E460EN11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF