100-E52KJ400 | Allen Bradley PLC IEC 100 Contactors

100-E52KJ400

100-E52KJ400

Description:

The Allen-Bradley 100-E52KJ400 Contactor is a 4-pole, DIN Rail/panel-mounted electronic contactor. It is part of the IEC 100 Contactors series. The 100-E52KJ400 Contactor has 4 normally open main contacts.

Rated 4.9 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E52KJ400

Add more parts to quote

Description:

The Allen-Bradley 100-E52KJ400 Contactor is a 4-pole, DIN Rail/panel-mounted electronic contactor. It is part of the IEC 100 Contactors series. The 100-E52KJ400 Contactor has 4 normally open main contacts.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E52KJ400.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 5 reviews

    Technical Specifications for 100-E52KJ400

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E52KJ400
DescriptionAC/DC-Operated Contactor
Operating Temperature-40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage20 to 60 Volts DC/24 to 60 Volts AC
PLC InterfaceNone
Number of Poles4 Poles
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E52KJ400
DescriptionAC/DC-Operated Contactor
Operating Temperature-40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage20 to 60 Volts DC/24 to 60 Volts AC
PLC InterfaceNone
Number of Poles4 Poles
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X
s

About 100-E52KJ400

The Allen-Bradley 100-E52KJ400 Contactor is a 4-pole contactor from the Bulletin 100E line of large frame contactors within the IEC 100 Contactors series. The 100E series large frame IEC contactors feature significantly reduced dimensions that help to save panel space and operation costs. The 100-E52KJ400 Contactor works with universal types of electronic coils which accept AC or DC control input voltage. This makes the coil and the contactor suitable for a wide range of applications. The voltage level required for energizing the coil contact is lower than and different from the AC motor switching voltage. The 100-E52KJ400 Contactor’s coil accepts 20 to 60 Volts DC or 24 to 60 Volts AC control voltage ranges for different applications. For thermal stability and maximum operation at full power, the 100-E52KJ400 Contactor is fitted with Class F insulation per the IEC 60947-4 standards. The 100-E52KJ400 Contactor’s main circuit has a rated voltage isolation of 690 Volts.



The Allen-Bradley 100-E52KJ400 IEC 100 Contactor has a voltage impulse withstand rating of 6000 Volts. The operating voltage ranges from 115 Volts AC to 690 Volts AC (at 50/60 Hertz AC frequency) or from 24 Volts DC to 440 Volts DC. The 100-E52KJ400 Contactor has an insulated IP2X rated protective enclosure that houses the contactor’s 4 normally open contacts, coil, and every other internal component, and that also provides protection to the users by preventing them from touching the contacts and getting electrocuted. The 100-E52KJ400 Contactor has an operating temperature range of -40 degrees Celsius to 70 degrees Celsius. It is designed for a high-vibration industrial environment, and it can be installed in locations with a maximum altitude of 3000 meters above sea level. The 100-E52KJ400 Contactor is designed for installation within a control cabinet, and it is meant to be mounted either on a panel or a DIN Rail.



Repair Services for 100-E52KJ400

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E52KJ400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E52KJ400

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E52KJ400

Resolutions For 100-E52KJ400

About

Technical Specifications for 100-E52KJ400

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E52KJ400
DescriptionAC/DC-Operated Contactor
Operating Temperature-40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage20 to 60 Volts DC/24 to 60 Volts AC
PLC InterfaceNone
Number of Poles4 Poles
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E52KJ400
DescriptionAC/DC-Operated Contactor
Operating Temperature-40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage20 to 60 Volts DC/24 to 60 Volts AC
PLC InterfaceNone
Number of Poles4 Poles
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X

About 100-E52KJ400

The Allen-Bradley 100-E52KJ400 Contactor is a 4-pole contactor from the Bulletin 100E line of large frame contactors within the IEC 100 Contactors series. The 100E series large frame IEC contactors feature significantly reduced dimensions that help to save panel space and operation costs. The 100-E52KJ400 Contactor works with universal types of electronic coils which accept AC or DC control input voltage. This makes the coil and the contactor suitable for a wide range of applications. The voltage level required for energizing the coil contact is lower than and different from the AC motor switching voltage. The 100-E52KJ400 Contactor’s coil accepts 20 to 60 Volts DC or 24 to 60 Volts AC control voltage ranges for different applications. For thermal stability and maximum operation at full power, the 100-E52KJ400 Contactor is fitted with Class F insulation per the IEC 60947-4 standards. The 100-E52KJ400 Contactor’s main circuit has a rated voltage isolation of 690 Volts.



The Allen-Bradley 100-E52KJ400 IEC 100 Contactor has a voltage impulse withstand rating of 6000 Volts. The operating voltage ranges from 115 Volts AC to 690 Volts AC (at 50/60 Hertz AC frequency) or from 24 Volts DC to 440 Volts DC. The 100-E52KJ400 Contactor has an insulated IP2X rated protective enclosure that houses the contactor’s 4 normally open contacts, coil, and every other internal component, and that also provides protection to the users by preventing them from touching the contacts and getting electrocuted. The 100-E52KJ400 Contactor has an operating temperature range of -40 degrees Celsius to 70 degrees Celsius. It is designed for a high-vibration industrial environment, and it can be installed in locations with a maximum altitude of 3000 meters above sea level. The 100-E52KJ400 Contactor is designed for installation within a control cabinet, and it is meant to be mounted either on a panel or a DIN Rail.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E52KJ400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E52KJ400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF