100-E52KY400 | Allen Bradley PLC IEC 100 Contactors

100-E52KY400

100-E52KY400

Description:

The Allen-Bradley 100-E52KY400 contactor is a large IEC 100 contactor. It has 4 poles. The current rating of the 100-E52KY400 contactor is 52 Amps.

Rated 4.5 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E52KY400

Add more parts to quote

Description:

The Allen-Bradley 100-E52KY400 contactor is a large IEC 100 contactor. It has 4 poles. The current rating of the 100-E52KY400 contactor is 52 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E52KY400.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 16 reviews

    Technical Specifications for 100-E52KY400

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E52KY400
Product TypeContactor
Coil TypeElectronic
Current Rating52 Amps
Control Voltage48 to 130 Volts AC/DC
Poles4
TerminalsScrew Type
NO Auxiliary Contacts4
NC Auxiliary Contacts0
Maximum Altitude3000 meters
ApprovalsEAC, RCM, KC, CE, CCC
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E52KY400
Product TypeContactor
Coil TypeElectronic
Current Rating52 Amps
Control Voltage48 to 130 Volts AC/DC
Poles4
TerminalsScrew Type
NO Auxiliary Contacts4
NC Auxiliary Contacts0
Maximum Altitude3000 meters
ApprovalsEAC, RCM, KC, CE, CCC
s

About 100-E52KY400

The Allen-Bradley 100-E52KY400 contactor is a 52 Amps-rated large contactor from the IEC 100 Contactors series. There are 4 poles on the 100-E52KY400 contactor. The contactor also has 4 normally open auxiliary contacts. However, normally closed auxiliary contacts are not available. The main terminals on the 100-E52KY400 contactor are screw-type terminals. The main contactor terminals, the coil terminals, and the auxiliary terminals on the contactor are all IP2X rated. The electronic coil on the 100-E52KY400 contactor is rated for 48 to 130 Volts AC/DC with 50 to 60 Hertz AC frequency. At 690 Volts AC single-phase voltage and 40 degrees Celsius, the rated current for the contactor is 100 Amps. The rated isolation voltage as per the IEC standards is 690 Volts and the rated isolation voltage as per the UL and CSA standards is 600 Volts. The rated impulse withstand voltage is 6 kVA. 



The Allen-Bradley 100-E52KY400 contactor complies with the electromagnetic compatibility requirements for the IEC 609470 standards. The insulation class of the coil on the 100-E52KY400 contactor is Class F as per the IEC 60947-4-1 standards. The rated coil frequency is 50 to 60 Hertz for the AC voltages. The ambient requirements include a -76 to 176 degrees Fahrenheit storage temperature range, a -40 to 158 degrees Fahrenheit operating temperature range, and a maximum installation altitude of 3000 meters. The 100-E series contactors such as the 100-E52KY400 contactor comply with multiple standards, including the EAC, RCM, KC, CE, CCC, CSA, and UL standards. Optional accessories including terminal shields, connecting bars, mechanical interlocks, terminal lugs and front/side-mounted auxiliary contacts can be ordered from Allen-Bradley. The 100-E52KY400 contactor is made from environmentally friendly materials. Only trained personnel should install and operate the contactor and associated machinery.



Repair Services for 100-E52KY400

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E52KY400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E52KY400

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E52KY400

Resolutions For 100-E52KY400

About

Technical Specifications for 100-E52KY400

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E52KY400
Product TypeContactor
Coil TypeElectronic
Current Rating52 Amps
Control Voltage48 to 130 Volts AC/DC
Poles4
TerminalsScrew Type
NO Auxiliary Contacts4
NC Auxiliary Contacts0
Maximum Altitude3000 meters
ApprovalsEAC, RCM, KC, CE, CCC
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E52KY400
Product TypeContactor
Coil TypeElectronic
Current Rating52 Amps
Control Voltage48 to 130 Volts AC/DC
Poles4
TerminalsScrew Type
NO Auxiliary Contacts4
NC Auxiliary Contacts0
Maximum Altitude3000 meters
ApprovalsEAC, RCM, KC, CE, CCC

About 100-E52KY400

The Allen-Bradley 100-E52KY400 contactor is a 52 Amps-rated large contactor from the IEC 100 Contactors series. There are 4 poles on the 100-E52KY400 contactor. The contactor also has 4 normally open auxiliary contacts. However, normally closed auxiliary contacts are not available. The main terminals on the 100-E52KY400 contactor are screw-type terminals. The main contactor terminals, the coil terminals, and the auxiliary terminals on the contactor are all IP2X rated. The electronic coil on the 100-E52KY400 contactor is rated for 48 to 130 Volts AC/DC with 50 to 60 Hertz AC frequency. At 690 Volts AC single-phase voltage and 40 degrees Celsius, the rated current for the contactor is 100 Amps. The rated isolation voltage as per the IEC standards is 690 Volts and the rated isolation voltage as per the UL and CSA standards is 600 Volts. The rated impulse withstand voltage is 6 kVA. 



The Allen-Bradley 100-E52KY400 contactor complies with the electromagnetic compatibility requirements for the IEC 609470 standards. The insulation class of the coil on the 100-E52KY400 contactor is Class F as per the IEC 60947-4-1 standards. The rated coil frequency is 50 to 60 Hertz for the AC voltages. The ambient requirements include a -76 to 176 degrees Fahrenheit storage temperature range, a -40 to 158 degrees Fahrenheit operating temperature range, and a maximum installation altitude of 3000 meters. The 100-E series contactors such as the 100-E52KY400 contactor comply with multiple standards, including the EAC, RCM, KC, CE, CCC, CSA, and UL standards. Optional accessories including terminal shields, connecting bars, mechanical interlocks, terminal lugs and front/side-mounted auxiliary contacts can be ordered from Allen-Bradley. The 100-E52KY400 contactor is made from environmentally friendly materials. Only trained personnel should install and operate the contactor and associated machinery.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E52KY400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E52KY400. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF