The 100-E580EJ11 DC-Operated Contactor is an IEC 100 Contactors series contactor by Allen-Bradley. The 100-E580EJ11 Contactor features a significantly reduced size (it is up to 25% smaller than standard contactors) to reduce its panel space requirements and reduce its installation costs. It also supports up to a 40% reduction in its power consumption rating, saving operation costs. The 100-E580EJ11 Contactor supports a wide range of accessories to meet specific application demands. It has an eco-friendly design, and it is designed to meet relevant worldwide industry standards such as the IEC, UL, RoHS, and CSA standards. The 100-E580EJ11 Contactor is designed for installation in a control cabinet. And it supports panel or DIN Rail mounting. The 100-E580EJ11 Contactor has 3 main current-carrying contacts that are the normally open type and that support a bolt-in type of connection to the main current circuit. These bolt-in terminals provide fast and easy field-side wiring without requiring specialized tools. 

The Allen-Bradley 100-E580EJ11 IEC 100 DC-Operated Contactor is designed to accept AC or DC input voltages. It supports a direct-on-line connection with a 3-phase power supply. It supports an AC input voltage range between 115 and 575 Volts AC at 50/60 Hertz frequency and DC input range from 24 to 440 Volts DC. The 100-E580EJ11 Contactor has a rated operating current of 580 Amps at 400 Volts AC for AC-3 applications and 800 Amps at 400 Volts AC for AC-1 applications. It has a maximum switching power rating of 355 kilowatts (AC-3) at 415 Volts AC input voltage. The 100-E580EJ11 Contactor has a rated circuit isolation voltage of 690 Volts AC and an impulse voltage withstand rating of 8000 Volts. The 100-E580EJ11 Contactor comes with a standard DC operating coil with a PLC interface. The coil offers lower energy consumption and a lower switching power rating for direct PLC connection. It has a coil voltage range between 24 Volts DC and 60 Volts DC.