100-E580EY11 | Allen Bradley PLC IEC 100 Contactors

100-E580EY11

100-E580EY11

Description:

The Allen-Bradley 100-E580EY11 Contactor is a 3-pole AC/DC electronic contactor. It is part of Bulletin 100-E in the IEC 100 Contactors series. The 100-E580EY11 Contactor has an operating voltage range from 115 to 575 Volts AC or 24 to 440 Volts DC.

Rated 4.9 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E580EY11

Add more parts to quote

Description:

The Allen-Bradley 100-E580EY11 Contactor is a 3-pole AC/DC electronic contactor. It is part of Bulletin 100-E in the IEC 100 Contactors series. The 100-E580EY11 Contactor has an operating voltage range from 115 to 575 Volts AC or 24 to 440 Volts DC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E580EY11.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 15 reviews

    Technical Specifications for 100-E580EY11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E580EY11
DescriptionAC/DC-Operated Contactor
Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating580 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage48 to 130 Volts AC/DC
PLC InterfaceSupported
Number of Poles3
Terminal TypeBolt Type
Auxiliary Contact1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E580EY11
DescriptionAC/DC-Operated Contactor
Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating580 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage48 to 130 Volts AC/DC
PLC InterfaceSupported
Number of Poles3
Terminal TypeBolt Type
Auxiliary Contact1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
s

About 100-E580EY11

The Allen-Bradley 100-E580EY11 AC/DC-Operated Contactor is an IEC 100 Contactors series contactor from the Bulletin 100-E MCS-E product line. The 100-E580EY11 Contactor comes with bolt-in type terminals for wiring to a power supply. It supports direct-on-line wiring to a power source. The 100-E580EY11 Contactor has 3 main current-carrying contacts that are the Normally Open (NO) contact type. It also comes with 2 factory-supplied auxiliary contacts (1 Normally Open contact and 1 Normally Closed contact). Depending on the application specifications, additional auxiliary contacts can be ordered to extend the 100-E580EY11 Contactor's capacity to 4 auxiliary contacts. The 100-E580EY11 Contactor supports a complete range of accessories, and optional accessories like terminal lugs can be ordered separately to simplify the wiring.



The Allen-Bradley 100-E580EY11 IEC 100 Contactor is supplied with a standard AC/DC type of electronic coil. This coil option supports an integrated PLC interface for easy integration into a control system. This coil also offers low switching ratings and a wide operating voltage range to accommodate a wide range of applications. The 100-E580EY11 Contactor has an AC/DC actuation voltage range of 48 to 130 Volts AC/DC and it is covered with a Class F insulation type. The 100-E580EY11 Contactor has a current rating of 580 Amps for AC-3 applications and 800 Amps for AC-1 applications. It has an AC-3 duty switching rating of 355 kilowatts at 415 Volts AC and an operating voltage range between 115 and 575 Volts AC or 24 and 440 Volts DC. The 100-E580EY11 Contactor offers built-in voltage suppression, and it has a rated isolation protection current of 690 Amps and an impulse withstand value of 8 kilovolts. It supports cabinet installation and it can be installed on a panel or a 35-millimeter DIN Rail.



Repair Services for 100-E580EY11

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E580EY11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E580EY11

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E580EY11

Resolutions For 100-E580EY11

About

Technical Specifications for 100-E580EY11

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E580EY11
DescriptionAC/DC-Operated Contactor
Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating580 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage48 to 130 Volts AC/DC
PLC InterfaceSupported
Number of Poles3
Terminal TypeBolt Type
Auxiliary Contact1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E580EY11
DescriptionAC/DC-Operated Contactor
Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating580 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage48 to 130 Volts AC/DC
PLC InterfaceSupported
Number of Poles3
Terminal TypeBolt Type
Auxiliary Contact1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X

About 100-E580EY11

The Allen-Bradley 100-E580EY11 AC/DC-Operated Contactor is an IEC 100 Contactors series contactor from the Bulletin 100-E MCS-E product line. The 100-E580EY11 Contactor comes with bolt-in type terminals for wiring to a power supply. It supports direct-on-line wiring to a power source. The 100-E580EY11 Contactor has 3 main current-carrying contacts that are the Normally Open (NO) contact type. It also comes with 2 factory-supplied auxiliary contacts (1 Normally Open contact and 1 Normally Closed contact). Depending on the application specifications, additional auxiliary contacts can be ordered to extend the 100-E580EY11 Contactor's capacity to 4 auxiliary contacts. The 100-E580EY11 Contactor supports a complete range of accessories, and optional accessories like terminal lugs can be ordered separately to simplify the wiring.



The Allen-Bradley 100-E580EY11 IEC 100 Contactor is supplied with a standard AC/DC type of electronic coil. This coil option supports an integrated PLC interface for easy integration into a control system. This coil also offers low switching ratings and a wide operating voltage range to accommodate a wide range of applications. The 100-E580EY11 Contactor has an AC/DC actuation voltage range of 48 to 130 Volts AC/DC and it is covered with a Class F insulation type. The 100-E580EY11 Contactor has a current rating of 580 Amps for AC-3 applications and 800 Amps for AC-1 applications. It has an AC-3 duty switching rating of 355 kilowatts at 415 Volts AC and an operating voltage range between 115 and 575 Volts AC or 24 and 440 Volts DC. The 100-E580EY11 Contactor offers built-in voltage suppression, and it has a rated isolation protection current of 690 Amps and an impulse withstand value of 8 kilovolts. It supports cabinet installation and it can be installed on a panel or a 35-millimeter DIN Rail.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E580EY11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E580EY11. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF