100-E65KN00 | Allen Bradley PLC IEC 100 Contactors

100-E65KN00

100-E65KN00

Description:

The Allen-Bradley 100-E65KN00 Contactor is a 3-pole, DIN Rail or panel-mounted electronic contactor from the IEC 100 Contactors series. The 100-E65KN00 contactor has a maximum rated switching current of 65 Amps. It has a standard electronic AC/DC coil but no PLC.

Rated 4.9 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E65KN00

Add more parts to quote

Description:

The Allen-Bradley 100-E65KN00 Contactor is a 3-pole, DIN Rail or panel-mounted electronic contactor from the IEC 100 Contactors series. The 100-E65KN00 contactor has a maximum rated switching current of 65 Amps. It has a standard electronic AC/DC coil but no PLC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E65KN00.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 10 reviews

    Technical Specifications for 100-E65KN00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E65KN00
DescriptionAC/DC-Operated Contactor
Current Rating65 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage250 to 500 Volts AC/DC
PLC InterfaceNone
Number of Poles3 Poles
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E65KN00
DescriptionAC/DC-Operated Contactor
Current Rating65 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage250 to 500 Volts AC/DC
PLC InterfaceNone
Number of Poles3 Poles
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X
s

About 100-E65KN00

The Allen-Bradley 100-E65KN00 Large Frame IEC Contactor is a 3-pole AC/DC contactor that is designed to provide low-cost switching for large-frame industrial applications. The 100-E65KN00 Contactor is part of the IEC 100 Contactors series features significantly reduced size and it supports a complete range of optional accessories for enhanced and specialized performance. It also features an environmentally friendly design. The 100-E65KN00 Contactor comes with a standard AC/DC electronic coil (without a PLC interface) that powers the contacts’ closure mechanism upon being energized. This electronic coil accepts AC/DC input voltage ranges from 250 Volts AC to 500 Volts AC (at 50/60 Hertz) or 250 Volts DC to 500 Volts DC. The coil features Class F insulation (per the IEC 60947-4 standards) which provides thermal stability at up to 180 degrees Celsius at the full load ratings. 



The Allen-Bradley 100-E65KN00 Contactor has a rated operating range between 115 Volts AC and 690 Volts AC (at 50 to 60 Hertz line frequency). It also has an operating current rating of 65 Amps at 400 Volts AC and a power rating of 37 kilowatts at 690 Volts AC and 50 Hertz for switching AC-3 and AC-2 motors. The 100-E65KN00 Contactor features a built-in voltage suppression feature, and it offers voltage isolation ratings of up to 690 Volts. The 100-E65KN00 Contactor has 3 main poles (contacts) for wiring. These contact poles have screw-type terminals for quick and easy field wiring. The 100-E65KN00 Contactor has a rated operating temperature range of -40 degrees Celsius to 70 degrees Celsius and a maximum operating altitude of up to 3000 meters. The 100-E65KN00 Contactor has an insulated IP2X rated enclosure that protects the users from touching the contacts. The 100-E65KN00 Contactor supports cabinet installation. It can be installed on a panel or on a 35-millimeter DIN Rail.



Repair Services for 100-E65KN00

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E65KN00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E65KN00

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E65KN00

Resolutions For 100-E65KN00

About

Technical Specifications for 100-E65KN00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E65KN00
DescriptionAC/DC-Operated Contactor
Current Rating65 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage250 to 500 Volts AC/DC
PLC InterfaceNone
Number of Poles3 Poles
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E65KN00
DescriptionAC/DC-Operated Contactor
Current Rating65 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage250 to 500 Volts AC/DC
PLC InterfaceNone
Number of Poles3 Poles
Terminal TypeScrew Type
Auxiliary ContactsNone
Protection ClassIP2X

About 100-E65KN00

The Allen-Bradley 100-E65KN00 Large Frame IEC Contactor is a 3-pole AC/DC contactor that is designed to provide low-cost switching for large-frame industrial applications. The 100-E65KN00 Contactor is part of the IEC 100 Contactors series features significantly reduced size and it supports a complete range of optional accessories for enhanced and specialized performance. It also features an environmentally friendly design. The 100-E65KN00 Contactor comes with a standard AC/DC electronic coil (without a PLC interface) that powers the contacts’ closure mechanism upon being energized. This electronic coil accepts AC/DC input voltage ranges from 250 Volts AC to 500 Volts AC (at 50/60 Hertz) or 250 Volts DC to 500 Volts DC. The coil features Class F insulation (per the IEC 60947-4 standards) which provides thermal stability at up to 180 degrees Celsius at the full load ratings. 



The Allen-Bradley 100-E65KN00 Contactor has a rated operating range between 115 Volts AC and 690 Volts AC (at 50 to 60 Hertz line frequency). It also has an operating current rating of 65 Amps at 400 Volts AC and a power rating of 37 kilowatts at 690 Volts AC and 50 Hertz for switching AC-3 and AC-2 motors. The 100-E65KN00 Contactor features a built-in voltage suppression feature, and it offers voltage isolation ratings of up to 690 Volts. The 100-E65KN00 Contactor has 3 main poles (contacts) for wiring. These contact poles have screw-type terminals for quick and easy field wiring. The 100-E65KN00 Contactor has a rated operating temperature range of -40 degrees Celsius to 70 degrees Celsius and a maximum operating altitude of up to 3000 meters. The 100-E65KN00 Contactor has an insulated IP2X rated enclosure that protects the users from touching the contacts. The 100-E65KN00 Contactor supports cabinet installation. It can be installed on a panel or on a 35-millimeter DIN Rail.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E65KN00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E65KN00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF