The Allen-Bradley 100-E750EJ11 DC-Operated Contactor is a 3-pole IEC 100 contactor with support for a built-in PLC interface that is designed for cost-effect switching in large-frame industrial applications. The 100-E750EJ11 Contactor features a compact design (with up to 25% size reduction compared with standard contactors) with significantly reduced weight and dimensions to conserve panel space. The 100-E750EJ11 Contactor saves significant amounts of energy through its low power consumption feature (it supports up to a 40% reduction in power use). The 100-E750EJ11 Contactor features environmental-friendly components and it is designed to meet relevant worldwide industrial standards like the RoHS, CSA, IEC, and UL standards. The 100-E750EJ11 Contactor is factory-fitted with a low power consumption DC electronic DC coil that provides low switching power for the PLC interface. The coil voltage can be remotely controlled via the PLC interface and the coil control voltage range is between 24 Volts DC and 60 Volts DC.

The Allen-Bradley 100-E750EJ11 IEC 100 DC-Operated Contactor’s electronic DC coil comes with a Class F insulation with thermal stability at up to 180 degree Celsius. The 100-E750EJ11 Contactor has a rated AC input voltage range of 115 to 575 Volts AC (at 50/60 Hertz, 3-phase) and a DC input voltage range of 24 to 440 Volts DC. It has an AC-3 switching power rating of 425 kilowatts and a current rating of 750 Amps (AC-3), as well as a 1050-Amp (AC-1) duty rating. The 100-E750EJ11 Contactor has 1 normally open contact and 1 normally closed contact as factory-installed auxiliary contacts. It also has 3 main contacts (all normally open) with bolt-in type terminals for wiring connections to the main power supply. The 100-E750EJ11 Contactor has a voltage isolation rating of 690 Volts AC (per the IEC standards) and a maximum impulse withstand rating of 8 kilovolts. The 100-E750EJ11 Contactor supports DIN Rail and panel mounting, and it can be installed at a maximum altitude of 3000 meters above sea level.