100-E750EY11

The 100-E750EY11 IEC 100 Series Contactor is a 3-pole contactor from the Allen-Bradley 100-E line of large-frame contactors. The 100-E750EY11 Contactor has large frame ratings and it is suitable for DIN Rail and panel mounting. The 100-E750EY11 Contactor can also be installed in a control cabinet. The 100-E750EY11 Contactor supports AC or DC voltage type actuation. Despite its large frame, it features a significantly reduced size (up to 25% smaller than average contactors) to save panel space. The 100-E750EY11 Contactor also features a low energy consumption level (with up to 40% reduction in power use compared to average contactors) to save operation costs. It comes with built-in voltage suppression to reduce operation downtime and it offers up to 690 Volts of circuit isolation and 8000 Volts of impulse withstand for long-lasting operation. The 100-E750EY11 Contactor is supplied with a standard AC/DC coil that supports the PLC interface.

With a low switching power rating (24 Volts DC/10 milliamps), the Allen-Bradley 100-E750EY11 IEC 100 Series Contactor can directly be connected to a PLC or low-voltage pilot device with interposing relays. The AC/DC coil has a configurable control voltage range of 48 to 138 Volts DC/AC and IEC standard Class F insulation. The 100-E750EY11 Contactor accepts AC or DC inputs. It supports a direct connection to an external power supply. The 100-E750EY11 Contactor has an acceptable input voltage range of 115 Volts AC to 575 Volts AC (50/60 Hertz, 3-phase) or 24 to 440 Volts DC. It has an AC-3 duty switching rating of 425 kilowatts and a rated current carrying capacity of 750 Amps. The 100-E750EY11 Contactor has a rated operating temperature range of -40 to 70 degrees Celsius and a maximum installation altitude of 3000 meters. The 100-E750EY11 Contactor has an IP2X insulated industrial housing, which provides protection against electric shock that may result from touching the internal contacts.