100-E80KN200 | Allen Bradley PLC IEC 100 Contactors

100-E80KN200

100-E80KN200

Description:

The Allen-Bradley/Rockwell Automation 100-E80KN200 IEC 100 series contactor operates with 4 poles which are 2 normally open contacts and 2 normally closed contacts. This contactor operates with AC and DC coil voltage and it can be ordered with an optional PLC interface. This contactor also operates with a current rating of 105 Amps.

Rated 4.9 with 17 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E80KN200

Add more parts to quote

Description:

The Allen-Bradley/Rockwell Automation 100-E80KN200 IEC 100 series contactor operates with 4 poles which are 2 normally open contacts and 2 normally closed contacts. This contactor operates with AC and DC coil voltage and it can be ordered with an optional PLC interface. This contactor also operates with a current rating of 105 Amps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E80KN200.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 17 reviews

    Technical Specifications for 100-E80KN200

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E80KN200
Type of ComponentContactor
Poles2 N.O., 2 N.C.
Auxiliary ContactsNone
Voltage250-500V AC/DC
Coil Voltage TypeStandard AC/DC
Current at 40 degrees Celsius105 A
PLC InterfaceOptional
InstallationPanel/DIN Rail Mounting
Screw TerminalsYes
Optional Overload RelaysElectronic
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E80KN200
Type of ComponentContactor
Poles2 N.O., 2 N.C.
Auxiliary ContactsNone
Voltage250-500V AC/DC
Coil Voltage TypeStandard AC/DC
Current at 40 degrees Celsius105 A
PLC InterfaceOptional
InstallationPanel/DIN Rail Mounting
Screw TerminalsYes
Optional Overload RelaysElectronic
s

About 100-E80KN200

The 100-E80KN200 contactor is an IEC 100 contactor that has been designed and manufactured by Allen-Bradley/Rockwell Automation. This contactor has been included in the IEC 100 Contactors series of Allen-Bradley contactors in the 100-E product line. The contactor has been designed to be used in applications that involve the use of motors and control systems for motors. This contactor operates with 4 poles that include 2 normally open contacts and 2 normally closed contacts. There are no auxiliary contacts built into this contactor but some can be selected from the accessories catalog whenever they are required by the application. The Allen-Bradley/Rockwell Automation 100-E80KN200 IEC 100 contactor can be installed on a DIN Rail or a panel. The mounting base that is needed will depend on the shock and vibration level of the application. 



 



The Allen-Bradley/Rockwell Automation 100-E80KN200 IEC 100 series contactor comes with electronic optional overload relays and it has been manufactured with environmentally friendly materials that enable it to operate in all sorts of applications without causing harm to the environment. The Allen-Bradley/Rockwell Automation 100-E80KN200 IEC contactor operates with a standard coil voltage range of 250 to 500 Volts AC and DC. The AC Voltages are used with a frequency range of 50 to 60 Hertz. The electronic coil for this contactor can be ordered with a PLC interface. This contactor is also a direct-on-line type of contactor. It operates with a current rating of 105 Amps at a standard temperature of 40 degrees Celsius. The operating temperature range for this contactor goes from -40 to 70 degrees Celsius. There are multiple accessories in the IEC 100 series catalog that can be used to customize this contactor as needed.



Repair Services for 100-E80KN200

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E80KN200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E80KN200

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E80KN200

Resolutions For 100-E80KN200

About

Technical Specifications for 100-E80KN200

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E80KN200
Type of ComponentContactor
Poles2 N.O., 2 N.C.
Auxiliary ContactsNone
Voltage250-500V AC/DC
Coil Voltage TypeStandard AC/DC
Current at 40 degrees Celsius105 A
PLC InterfaceOptional
InstallationPanel/DIN Rail Mounting
Screw TerminalsYes
Optional Overload RelaysElectronic
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E80KN200
Type of ComponentContactor
Poles2 N.O., 2 N.C.
Auxiliary ContactsNone
Voltage250-500V AC/DC
Coil Voltage TypeStandard AC/DC
Current at 40 degrees Celsius105 A
PLC InterfaceOptional
InstallationPanel/DIN Rail Mounting
Screw TerminalsYes
Optional Overload RelaysElectronic

About 100-E80KN200

The 100-E80KN200 contactor is an IEC 100 contactor that has been designed and manufactured by Allen-Bradley/Rockwell Automation. This contactor has been included in the IEC 100 Contactors series of Allen-Bradley contactors in the 100-E product line. The contactor has been designed to be used in applications that involve the use of motors and control systems for motors. This contactor operates with 4 poles that include 2 normally open contacts and 2 normally closed contacts. There are no auxiliary contacts built into this contactor but some can be selected from the accessories catalog whenever they are required by the application. The Allen-Bradley/Rockwell Automation 100-E80KN200 IEC 100 contactor can be installed on a DIN Rail or a panel. The mounting base that is needed will depend on the shock and vibration level of the application. 



 



The Allen-Bradley/Rockwell Automation 100-E80KN200 IEC 100 series contactor comes with electronic optional overload relays and it has been manufactured with environmentally friendly materials that enable it to operate in all sorts of applications without causing harm to the environment. The Allen-Bradley/Rockwell Automation 100-E80KN200 IEC contactor operates with a standard coil voltage range of 250 to 500 Volts AC and DC. The AC Voltages are used with a frequency range of 50 to 60 Hertz. The electronic coil for this contactor can be ordered with a PLC interface. This contactor is also a direct-on-line type of contactor. It operates with a current rating of 105 Amps at a standard temperature of 40 degrees Celsius. The operating temperature range for this contactor goes from -40 to 70 degrees Celsius. There are multiple accessories in the IEC 100 series catalog that can be used to customize this contactor as needed.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E80KN200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E80KN200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF