100-E96KN00 | Allen Bradley PLC IEC 100 Contactors

100-E96KN00

100-E96KN00

Description:

The Allen-Bradley 100-E96KN00 contactor is an IEC 100 series contactor. It has a current rating of 96 Amps. The electronic coil on this contactor is rated for 250 to 500 Volts AC/DC.

Rated 4.5 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 100-E96KN00

Add more parts to quote

Description:

The Allen-Bradley 100-E96KN00 contactor is an IEC 100 series contactor. It has a current rating of 96 Amps. The electronic coil on this contactor is rated for 250 to 500 Volts AC/DC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 100-E96KN00.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 7 reviews

    Technical Specifications for 100-E96KN00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E96KN00
Product TypeContactor
Coil TypeElectronic
Current Rating96 Amps
Control Voltage250 to 500 Volts AC/DC
Poles3
TerminalsScrew Type
MountingPanel or DIN Rail
NO Auxiliary Terminals0
NC Auxiliary Terminals0
Dimensions4.7 x 2.76 x 4.57 inches
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E96KN00
Product TypeContactor
Coil TypeElectronic
Current Rating96 Amps
Control Voltage250 to 500 Volts AC/DC
Poles3
TerminalsScrew Type
MountingPanel or DIN Rail
NO Auxiliary Terminals0
NC Auxiliary Terminals0
Dimensions4.7 x 2.76 x 4.57 inches
s

About 100-E96KN00

The Allen-Bradley 100-E96KN00 contactor is a direct-on-line type of IEC 100 series contactor. At 60 degrees Celsius, it has a 96-Amp operating current rating at 400 Volts AC (3-phase voltage). At 40 degrees Celsius, the contactor has an operating current rating of 130 Amps at 690 Volts AC (1-phase voltage). It belongs to the 100-E line of the IEC 100 contactors. The low-power electronic coil on the contactor has a control voltage rating of 250 to 500 Volts AC/250 to 500 Volts DC. The frequency range for the AC control voltage is 50 to 60 Hertz. The 100-E96KN00 contactor has 3 poles and screw type main terminals. No auxiliary contacts are available on the contactor. The main terminals are IP 00 rated. The coil terminals on the 100-E96KN00 contactor are IP2X rated.



At 50 Hertz, the Allen-Bradley 100-E96KN00 IEC 100 contactor has the following kilowatt output power ratings for switching AC motors: 25 kilowatts at 220 to 240 Volts AC, 46 kilowatts at 380 to 400 Volts AC, 55 kilowatts at 415, 440, 500, and 690 Volts AC, and 40 kilowatts at 1000 Volts AC. At 60 Hertz, the 100-E96KN00 contactor has the following Horsepower output ratings for switching AC motors: 30 Horsepower at 200 and 230 Volts AC, 60 Horsepower at 460 Volts AC, and 75 Horsepower at 575 Volts AC. As per the IEC standards, the isolation voltage rating for the 100-E96KN00 contactor is 1000 Volts AC. As per the UL and CSA standards, the isolation voltage rating for the 100-E96KN00 contactor is 600 Volts AC. The contactor has a height of 4.7 inches, a width of 2.76 inches, and a depth of 4.57 inches.



Repair Services for 100-E96KN00

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E96KN00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 100-E96KN00

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 100-E96KN00

Resolutions For 100-E96KN00

About

Technical Specifications for 100-E96KN00

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E96KN00
Product TypeContactor
Coil TypeElectronic
Current Rating96 Amps
Control Voltage250 to 500 Volts AC/DC
Poles3
TerminalsScrew Type
MountingPanel or DIN Rail
NO Auxiliary Terminals0
NC Auxiliary Terminals0
Dimensions4.7 x 2.76 x 4.57 inches
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 100 Contactors
Part Number100-E96KN00
Product TypeContactor
Coil TypeElectronic
Current Rating96 Amps
Control Voltage250 to 500 Volts AC/DC
Poles3
TerminalsScrew Type
MountingPanel or DIN Rail
NO Auxiliary Terminals0
NC Auxiliary Terminals0
Dimensions4.7 x 2.76 x 4.57 inches

About 100-E96KN00

The Allen-Bradley 100-E96KN00 contactor is a direct-on-line type of IEC 100 series contactor. At 60 degrees Celsius, it has a 96-Amp operating current rating at 400 Volts AC (3-phase voltage). At 40 degrees Celsius, the contactor has an operating current rating of 130 Amps at 690 Volts AC (1-phase voltage). It belongs to the 100-E line of the IEC 100 contactors. The low-power electronic coil on the contactor has a control voltage rating of 250 to 500 Volts AC/250 to 500 Volts DC. The frequency range for the AC control voltage is 50 to 60 Hertz. The 100-E96KN00 contactor has 3 poles and screw type main terminals. No auxiliary contacts are available on the contactor. The main terminals are IP 00 rated. The coil terminals on the 100-E96KN00 contactor are IP2X rated.



At 50 Hertz, the Allen-Bradley 100-E96KN00 IEC 100 contactor has the following kilowatt output power ratings for switching AC motors: 25 kilowatts at 220 to 240 Volts AC, 46 kilowatts at 380 to 400 Volts AC, 55 kilowatts at 415, 440, 500, and 690 Volts AC, and 40 kilowatts at 1000 Volts AC. At 60 Hertz, the 100-E96KN00 contactor has the following Horsepower output ratings for switching AC motors: 30 Horsepower at 200 and 230 Volts AC, 60 Horsepower at 460 Volts AC, and 75 Horsepower at 575 Volts AC. As per the IEC standards, the isolation voltage rating for the 100-E96KN00 contactor is 1000 Volts AC. As per the UL and CSA standards, the isolation voltage rating for the 100-E96KN00 contactor is 600 Volts AC. The contactor has a height of 4.7 inches, a width of 2.76 inches, and a depth of 4.57 inches.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E96KN00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 100-E96KN00. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF