DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 104-E116KJ22 contactor is a large reversing contactor. It has a current rating of 116 Amps. The 104-E116KJ22 contactor has an electronic coil rated for 24 to 60 Volts AC and 20 to 60 Volts DC.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 104-E116KJ22. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 104 Contactors |
Part Number | 104-E116KJ22 |
Product type | Contactor |
Coil | Electronic |
Current Rating | 116 Amps |
Control Voltage | 24 to 60 Volts AC/20 to 60 Volts DC |
Mounting | Panel or DIN Rail |
NO Auxiliary Contact | 1 |
NC Auxiliary Contact | 1 |
Dimensions | 150 x 90 x 126 millimeters |
Maximum Altitude | 3000 meters |
Operating Temperature | -40 to 158 degrees Fahrenheit |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 104 Contactors |
Part Number | 104-E116KJ22 |
Product type | Contactor |
Coil | Electronic |
Current Rating | 116 Amps |
Control Voltage | 24 to 60 Volts AC/20 to 60 Volts DC |
Mounting | Panel or DIN Rail |
NO Auxiliary Contact | 1 |
NC Auxiliary Contact | 1 |
Dimensions | 150 x 90 x 126 millimeters |
Maximum Altitude | 3000 meters |
Operating Temperature | -40 to 158 degrees Fahrenheit |
The Allen-Bradley 104-E116KJ22 contactor is an IEC 104 and 104-E series reversing contactor. It has a current rating of 116 Amps. The coil on the 104-E116KJ22 contactor is electronic with a control voltage rating of 24 to 60 Volts AC (50/60 Hertz) and 20 to 60 Volts DC. The 104-E116KJ22 reversing contactor is a 3-pole device with bar connections for the main terminals. The contactor has 1 normally open auxiliary contact and 1 normally closed auxiliary contact. The auxiliary contacts work with mechanical interlocks only. At 60 degrees Celsius and 400 Volts AC (3-phase), the rated operational current is 116 Amps. At 40 degrees Celsius and 690 Volts AC (1-phase), the rated operational current is 160 Amps.
At 50 Hertz line frequency, the ratings for switching AC motors with the Allen-Bradley 104-E116KJ22 contactor are as follows: 55 kilowatts at 220 to 240, 380 to 400, and 415 Volts AC, 75 kilowatts at 440 and 500 Volts AC, 63 kilowatts at 690 Volts AC, and 55 kilowatts at 1000 Volts AC. At 60 Hertz line frequency, the ratings for switching AC motors are as follows: 30 Horsepower at 200 Volts AC, 40 Horsepower at 230 Volts AC, 75 Horsepower at 460 Volts AC, and 100 Horsepower at 575 Volts AC. The dimensions of the 104-E116KJ22 contactor are 150 x 90 x 126 millimeters. The main contacts on the 104-E116KJ22 contactor are IP 00 rated. The coil terminals are IP2X rated and the auxiliary contacts are IP2X rated. The operating temperature range for the 104-E116KJ22 contactor is -40 to 158 degrees Fahrenheit. The recommended maximum altitude is 3000 meters.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 104-E116KJ22. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 104 Contactors |
Part Number | 104-E116KJ22 |
Product type | Contactor |
Coil | Electronic |
Current Rating | 116 Amps |
Control Voltage | 24 to 60 Volts AC/20 to 60 Volts DC |
Mounting | Panel or DIN Rail |
NO Auxiliary Contact | 1 |
NC Auxiliary Contact | 1 |
Dimensions | 150 x 90 x 126 millimeters |
Maximum Altitude | 3000 meters |
Operating Temperature | -40 to 158 degrees Fahrenheit |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 104 Contactors |
Part Number | 104-E116KJ22 |
Product type | Contactor |
Coil | Electronic |
Current Rating | 116 Amps |
Control Voltage | 24 to 60 Volts AC/20 to 60 Volts DC |
Mounting | Panel or DIN Rail |
NO Auxiliary Contact | 1 |
NC Auxiliary Contact | 1 |
Dimensions | 150 x 90 x 126 millimeters |
Maximum Altitude | 3000 meters |
Operating Temperature | -40 to 158 degrees Fahrenheit |
The Allen-Bradley 104-E116KJ22 contactor is an IEC 104 and 104-E series reversing contactor. It has a current rating of 116 Amps. The coil on the 104-E116KJ22 contactor is electronic with a control voltage rating of 24 to 60 Volts AC (50/60 Hertz) and 20 to 60 Volts DC. The 104-E116KJ22 reversing contactor is a 3-pole device with bar connections for the main terminals. The contactor has 1 normally open auxiliary contact and 1 normally closed auxiliary contact. The auxiliary contacts work with mechanical interlocks only. At 60 degrees Celsius and 400 Volts AC (3-phase), the rated operational current is 116 Amps. At 40 degrees Celsius and 690 Volts AC (1-phase), the rated operational current is 160 Amps.
At 50 Hertz line frequency, the ratings for switching AC motors with the Allen-Bradley 104-E116KJ22 contactor are as follows: 55 kilowatts at 220 to 240, 380 to 400, and 415 Volts AC, 75 kilowatts at 440 and 500 Volts AC, 63 kilowatts at 690 Volts AC, and 55 kilowatts at 1000 Volts AC. At 60 Hertz line frequency, the ratings for switching AC motors are as follows: 30 Horsepower at 200 Volts AC, 40 Horsepower at 230 Volts AC, 75 Horsepower at 460 Volts AC, and 100 Horsepower at 575 Volts AC. The dimensions of the 104-E116KJ22 contactor are 150 x 90 x 126 millimeters. The main contacts on the 104-E116KJ22 contactor are IP 00 rated. The coil terminals are IP2X rated and the auxiliary contacts are IP2X rated. The operating temperature range for the 104-E116KJ22 contactor is -40 to 158 degrees Fahrenheit. The recommended maximum altitude is 3000 meters.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 104-E116KJ22. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 104-E116KJ22. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.