The Allen-Bradley/Rockwell Automation 104-E146ED22L contactor is a reversing contactor that comes with 3 poles. It has been manufactured as part of the Bulletin 104-E product line in the broader Allen-Bradley IEC 104 Contactors series. The 104-E146ED22L reversing contactor has all of the same specifications as the original Allen-Bradley 104-E146ED22 reversing contactor, but it comes with terminal lugs built into it, while the 104-E146ED22 reversing contactor model does not. The built-in terminal lugs are indicated at the end of the 104-E146ED22L reversing contactor’s catalog number by the letter “L,” and they allow it to host a larger number of connections than the standard contactor version is able to. This contactor is suitable for most industrial applications that involve motors, including applications with AC-1, AC-2, and AC-3 types of motors.

The 104-E146ED22L reversing contactor from the Allen-Bradley/Rockwell Automation IEC 104 Contactors series has 3 main contacts and 2 built-in auxiliary contacts. The auxiliary contacts consist of 1 NC or normally closed contact and 1 NO or normally open contact. All 3 of the main contacts are normally open. This reversing contactor can be used in special applications that require logic control because it can be ordered with an electronic coil that has a PLC or programmable logic controller input. However, it should only be ordered with the special electronic coil when it is used with logic control applications because the special coil’s PLC input needs to be used if it is present even though it is not required for most standard applications. Both the special electronic coil and the standard electronic coil that the 104-E146ED22L reversing contactor is compatible with support coil voltage ratings of 100 to 250 Volts AC/DC and 50 to 60 Hertz AC voltage frequency.