104-E146KN22L | Allen Bradley PLC IEC 104 Contactors

104-E146KN22L

104-E146KN22L

Description:

The Allen-Bradley/Rockwell Automation 104-E146KN22L reversing contactor operates with a voltage range of 250 to 500 Volts AC and DC. This contactor comes with built-in terminal lugs and can be ordered with a PLC interface if the application requires it. This IEC 104 series contactor comes with one N.O. and one N.C. auxiliary contact.

Rated 4.6 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 104-E146KN22L

Add more parts to quote

Description:

The Allen-Bradley/Rockwell Automation 104-E146KN22L reversing contactor operates with a voltage range of 250 to 500 Volts AC and DC. This contactor comes with built-in terminal lugs and can be ordered with a PLC interface if the application requires it. This IEC 104 series contactor comes with one N.O. and one N.C. auxiliary contact.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 104-E146KN22L.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 6 reviews

    Technical Specifications for 104-E146KN22L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 104 Contactors
Part Number104-E146KN22L
Type of ComponentContactor
Operating ModeReversing
Number of Poles3
Voltage TypeStandard AC/DC
Voltage Range 250-500V AC/DC
Frequency50-60 Hz
Current at 40 degrees Celsius225 A
Auxiliary Contacts1 N.O., 1 N.C.
PLC InterfaceOptional
Built-in Terminal LugsYes
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 104 Contactors
Part Number104-E146KN22L
Type of ComponentContactor
Operating ModeReversing
Number of Poles3
Voltage TypeStandard AC/DC
Voltage Range 250-500V AC/DC
Frequency50-60 Hz
Current at 40 degrees Celsius225 A
Auxiliary Contacts1 N.O., 1 N.C.
PLC InterfaceOptional
Built-in Terminal LugsYes
s

About 104-E146KN22L

The 104-E146KN22L contactor is an AC/DC reversing contactor that has been included in the IEC 104 and Bulletin 104-E series of contactors manufactured by Allen-Bradley/Rockwell Automation. This contactor is a reversing contactor, which means it is used in applications with motors that require the motors to reverse their voltage flow or polarity, and it is the contactor’s job to perform the reversing functions. This contactor has been designed with environmentally friendly materials and to use energy efficiently. This contactor can be used in an operating temperature range of -40 to 70 degrees Celsius and at a maximum altitude of 3000 meters above sea level. The Allen-Bradley 104-E146KN22L AC/DC contactor can operate in applications with voltage ranges between the 250 and 500 Volts AC/DC. When working with the AC voltage, the contactor’s frequency needs to be between 50 and 60 Hertz. The contactor supports a current rating of up to 225 Amps at a temperature of up to 40 degrees Celsius. 



The Allen-Bradley/Rockwell Automation 104-E146KN22L AC/DC contactor from the IEC 104 and Bulletin 104-E contactor series can be mounted on either a DIN Rail or a mounting panel according to the application’s specifications and requirements. It comes with 5 contacts which are 3 main contacts, 1 normally open (N.O.) auxiliary contact, and 1 normally closed (N.C.) auxiliary contact. Putting this contactor into operation and the whole wiring process for the contactor are simple and do not require special tools other than a screwdriver. Unlike many of the other contactors from the same series, the 104-E146KN22L AC/DC contactor includes built-in terminal lugs that provide additional connection points to the contactor. This contactor can also host a PLC interface which can improve its control features during operations with more sophisticated control and application options. The IEC 104 series includes an accessories catalog full of spare parts and accessories that are meant to improve the functioning of the Allen-Bradley 104-E146KN22L AC/DC contactor.



Repair Services for 104-E146KN22L

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104-E146KN22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 104-E146KN22L

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 104-E146KN22L

Resolutions For 104-E146KN22L

About

Technical Specifications for 104-E146KN22L

BrandAllen-Bradley / Rockwell Automation
SeriesIEC 104 Contactors
Part Number104-E146KN22L
Type of ComponentContactor
Operating ModeReversing
Number of Poles3
Voltage TypeStandard AC/DC
Voltage Range 250-500V AC/DC
Frequency50-60 Hz
Current at 40 degrees Celsius225 A
Auxiliary Contacts1 N.O., 1 N.C.
PLC InterfaceOptional
Built-in Terminal LugsYes
BrandAllen-Bradley / Rockwell Automation
SeriesIEC 104 Contactors
Part Number104-E146KN22L
Type of ComponentContactor
Operating ModeReversing
Number of Poles3
Voltage TypeStandard AC/DC
Voltage Range 250-500V AC/DC
Frequency50-60 Hz
Current at 40 degrees Celsius225 A
Auxiliary Contacts1 N.O., 1 N.C.
PLC InterfaceOptional
Built-in Terminal LugsYes

About 104-E146KN22L

The 104-E146KN22L contactor is an AC/DC reversing contactor that has been included in the IEC 104 and Bulletin 104-E series of contactors manufactured by Allen-Bradley/Rockwell Automation. This contactor is a reversing contactor, which means it is used in applications with motors that require the motors to reverse their voltage flow or polarity, and it is the contactor’s job to perform the reversing functions. This contactor has been designed with environmentally friendly materials and to use energy efficiently. This contactor can be used in an operating temperature range of -40 to 70 degrees Celsius and at a maximum altitude of 3000 meters above sea level. The Allen-Bradley 104-E146KN22L AC/DC contactor can operate in applications with voltage ranges between the 250 and 500 Volts AC/DC. When working with the AC voltage, the contactor’s frequency needs to be between 50 and 60 Hertz. The contactor supports a current rating of up to 225 Amps at a temperature of up to 40 degrees Celsius. 



The Allen-Bradley/Rockwell Automation 104-E146KN22L AC/DC contactor from the IEC 104 and Bulletin 104-E contactor series can be mounted on either a DIN Rail or a mounting panel according to the application’s specifications and requirements. It comes with 5 contacts which are 3 main contacts, 1 normally open (N.O.) auxiliary contact, and 1 normally closed (N.C.) auxiliary contact. Putting this contactor into operation and the whole wiring process for the contactor are simple and do not require special tools other than a screwdriver. Unlike many of the other contactors from the same series, the 104-E146KN22L AC/DC contactor includes built-in terminal lugs that provide additional connection points to the contactor. This contactor can also host a PLC interface which can improve its control features during operations with more sophisticated control and application options. The IEC 104 series includes an accessories catalog full of spare parts and accessories that are meant to improve the functioning of the Allen-Bradley 104-E146KN22L AC/DC contactor.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104-E146KN22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 104-E146KN22L. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF