Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley IEC 104 Contactors 104-E190EN22

Product image is representative; revision or series may vary. Contact us to request a specific version.

104-E190EN22

|
Need a Specific Revision?

The Allen-Bradley 104-E190EN22 Contactor is a 3-pole type of reversing contactor from the IEC 104 Contactors series. The 104-E190EN22 Reversing Contactor has 3 poles for its main contacts and 2 auxiliary contacts. It is protected by an IP2X rated enclosure.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 104-E190EN22

ManufacturerAllen Bradley
CategoryPLCs
Product LineIEC 104 Contactors
Part Number104-E190EN22
Weight6.00 lbs (2.72 kg)
DescriptionAC/DC-Operated Contactor
Operating Voltage Range115 to 575 Volts AC, 24 to 440 Volts DC
Current Rating190 Amps
Coil TypeStandard AC/DC Type Electronic Coil
Coil Voltage250 to 500 Volts AC/DC
PLC InterfaceYes
Number of Poles3
Terminal TypeBolt-in Type
Auxiliary Contacts1 Normally Open (NO) and 1 Normally Closed (NC)
Protection ClassIP2X
Request a Repair

The Allen-Bradley 104-E190EN22 Reversing AC/DC Contactor is a 3-pole reversing contactor from the IEC 104 Contactors series by Allen-Bradley/Rockwell Automation. The 104-E190EN22 Contactor is built to save panel space. It offers significantly reduced weight and dimensions (it is up to 25% smaller than older standard contactor models) to save installation panel space and reduce installation costs. The 104-E190EN22 Contactor saves energy with its low power consumption requirements and efficient operation. It features an eco-friendly design and parts that meet the RoHS compliance rating and it has a wide range of accessories that can be used to enhance and refine its performance and provide flexibility. The 104-E190EN22 Contactor comes with 2 side-mounted snap-on auxiliary contact blocks and a side-mounted mechanical interlock as factory-supplied options. The auxiliary contact blocks are of the normally open and normally closed type, and they are used for supporting the low-power feedback wiring.

The Allen-Bradley/Rockwell Automation 104-E190EN22 Reversing Contactor’s factory-supplied mechanical interlock helps to provide a connection to side-by-side mounted contactors for supporting the reverse and forward wiring of industrial AC motors. The 104-E190EN22 Contactor has a 3-pole main contact design for wiring to a 3-phase power source. The poles are of the normally open type and they come with bolt-in type terminals for quick and effective field wiring. The 104-E190EN22 Contactor has an IP2X enclosure protection rating. This enclosure provides insulated housing for all of the contactor’s internal components (including current-carrying terminals and coils) and it prevents the users from touching electrical contacts. Per the IEC 60068-2-27/60068-2-6 standards, the 104-E190EN22 Contactor is designed to withstand most high-vibration and high-shock industrial conditions. It has a wide operating temperature range and can be installed at a very high altitude (up to 3000 meters above sea level) without de-rating. The 104-E190EN22 Contactor has a rated working temperature range between -40 degrees Celsius and 70 degrees Celsius.