DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 104-E205KJ22 contactor is an IEC 104 series reversing contactor. It has 3 poles. The isolation voltage rating of the 104-E205KJ22 contactor as per the IEC standards is 1000 Volts.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 104-E205KJ22. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 104 Contactors |
Part Number | 104-E205KJ22 |
Product Type | Contactor |
Coil Type | Electronic |
Mounting | Panel or DIN Rail |
Current Rating | 205 Amps |
Control Voltage | 24 to 60 Volts AC, 20 to 60 Volts DC |
IEC Isolation Voltage Rating | 1000 Volts |
Poles | 3 |
NC Auxiliary Contacts | 1 |
NO Auxiliary Contacts | 1 |
Maximum Altitude | 3000 meters |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 104 Contactors |
Part Number | 104-E205KJ22 |
Product Type | Contactor |
Coil Type | Electronic |
Mounting | Panel or DIN Rail |
Current Rating | 205 Amps |
Control Voltage | 24 to 60 Volts AC, 20 to 60 Volts DC |
IEC Isolation Voltage Rating | 1000 Volts |
Poles | 3 |
NC Auxiliary Contacts | 1 |
NO Auxiliary Contacts | 1 |
Maximum Altitude | 3000 meters |
The Allen-Bradley 104-E205KJ22 contactor is an IEC 104 and 104-E series reversing contactor with a current rating of 205 Amps. General specifications for the 104-E series contactors like the 104-E205KJ22 contactor include a rated isolation voltage of 1000 Volts as per the IEC standards, a rated impulse withstand voltage of 8 kilovolts, a Class F insulation class for the coil as per the IEC 60947-4-1 standard, a -40 to 158 degrees Fahrenheit ambient temperature range for operation and storage, 3000 meters of maximum operating altitude, and IP 00-rated main contacts. The 104-E205KJ22 contactor is a 3-pole device with an electronic coil. The coil voltage range is 24 to 60 Volts AC (at 50/60 Hertz) or 20 to 60 Volts DC. The contactor features 1 NC auxiliary contact and 1 NO auxiliary contact. The contactor features bar connections for the terminals.
The Allen-Bradley 104-E205KJ22 contactor satisfies the requirements of the IEC 60068-2-27 standards for shock resistance. It also satisfies the requirements of the IEC 60068-2-6 standards for vibration resistance. The coil terminals are IP2X rated in the connected state and the auxiliary contacts are also IP2X rated in the connected state. The height of the 104-E205KJ22 contactor is 7.72 inches, its width is 4.13 inches, and its depth is 5.98 inches. The single-phase current rating for the 104-E205KJ22 contactor is 350 Amps. The output power ratings for switching the AC motors are as follows: 110 kilowatts at 220 to 240, 380 to 400, and 415 Volts AC, 132 kilowatts at 440 and 500 Volts AC, 160 kilowatts at 690 Volts AC, and 132 kilowatts at 1000 Volts AC. To ensure optimal and safe operation in the long-term, only trained technical personnel should handle and install the 104-E205KJ22 contactor and its associated accessories.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 104-E205KJ22. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 104 Contactors |
Part Number | 104-E205KJ22 |
Product Type | Contactor |
Coil Type | Electronic |
Mounting | Panel or DIN Rail |
Current Rating | 205 Amps |
Control Voltage | 24 to 60 Volts AC, 20 to 60 Volts DC |
IEC Isolation Voltage Rating | 1000 Volts |
Poles | 3 |
NC Auxiliary Contacts | 1 |
NO Auxiliary Contacts | 1 |
Maximum Altitude | 3000 meters |
Brand | Allen-Bradley / Rockwell Automation |
Series | IEC 104 Contactors |
Part Number | 104-E205KJ22 |
Product Type | Contactor |
Coil Type | Electronic |
Mounting | Panel or DIN Rail |
Current Rating | 205 Amps |
Control Voltage | 24 to 60 Volts AC, 20 to 60 Volts DC |
IEC Isolation Voltage Rating | 1000 Volts |
Poles | 3 |
NC Auxiliary Contacts | 1 |
NO Auxiliary Contacts | 1 |
Maximum Altitude | 3000 meters |
The Allen-Bradley 104-E205KJ22 contactor is an IEC 104 and 104-E series reversing contactor with a current rating of 205 Amps. General specifications for the 104-E series contactors like the 104-E205KJ22 contactor include a rated isolation voltage of 1000 Volts as per the IEC standards, a rated impulse withstand voltage of 8 kilovolts, a Class F insulation class for the coil as per the IEC 60947-4-1 standard, a -40 to 158 degrees Fahrenheit ambient temperature range for operation and storage, 3000 meters of maximum operating altitude, and IP 00-rated main contacts. The 104-E205KJ22 contactor is a 3-pole device with an electronic coil. The coil voltage range is 24 to 60 Volts AC (at 50/60 Hertz) or 20 to 60 Volts DC. The contactor features 1 NC auxiliary contact and 1 NO auxiliary contact. The contactor features bar connections for the terminals.
The Allen-Bradley 104-E205KJ22 contactor satisfies the requirements of the IEC 60068-2-27 standards for shock resistance. It also satisfies the requirements of the IEC 60068-2-6 standards for vibration resistance. The coil terminals are IP2X rated in the connected state and the auxiliary contacts are also IP2X rated in the connected state. The height of the 104-E205KJ22 contactor is 7.72 inches, its width is 4.13 inches, and its depth is 5.98 inches. The single-phase current rating for the 104-E205KJ22 contactor is 350 Amps. The output power ratings for switching the AC motors are as follows: 110 kilowatts at 220 to 240, 380 to 400, and 415 Volts AC, 132 kilowatts at 440 and 500 Volts AC, 160 kilowatts at 690 Volts AC, and 132 kilowatts at 1000 Volts AC. To ensure optimal and safe operation in the long-term, only trained technical personnel should handle and install the 104-E205KJ22 contactor and its associated accessories.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 104-E205KJ22. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 104-E205KJ22. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.