The Allen-Bradley 104-E265ED22 Reversing Contactor is an IEC 104 reversing contactor from the Bulletin 104-E product line. The 104-E265ED22 Contactor, like all of the Bulletin 104-E contactors, has an eco-friendly design that is RoHS certified. It also has several worldwide industry standard ratings including the CE, CSA, CCC, c-UL-us, IEC, EAC, and RCM standards. The 104-E265ED22 Contactor is built for tough industrial conditions, and it can withstand high levels of vibration and shock in applications per the IEC standards. It has an IP2X ingress protection rating and an insulated housing that prevents the users from touching the internal contacts. The 104-E265ED22 Contactor has an enhanced thermal design that allows for a wide operating temperature range. It is designed to operate specifically within a -40 to 70 degrees Celsius ambient temperature range. The 104-E265ED22 Contactor can also be installed at a maximum altitude of 3000 meters above sea level and operate without derating.

The Allen-Bradley 104-E265ED22 IEC 104 Reversing Contactor supports 3-phase voltage ratings of 115 Volts AC, 200 Volts AC, 230 Volts AC, 240 Volts AC, 400 Volts AC, 415 Volts AC, 460 Volts AC, 500 Volts AC, and 575 Volts AC. It also supports DC inputs with an operating range from 48 Volt AC through 440 Volt DC. The 104-E265ED22 Contactor has a standard type of electronic AC/DC coil which consumes only low amounts of switching power and supports a wide coil voltage range. This coil’s low switching energy is rated at 10 milliamps and 24 Volts DC and this enables it to support a direct interface to a PLC without additional relay circuits.  The 104-E265ED22 Contactor has a maximum current carrying capacity of 265 Amps (AC-3) on its main circuit contacts. It also has a maximum switching power rating of 132 kilowatts at 400 Volts AC. The 104-E265ED22 Contactor supports DIN Rail and panel mounting and it can be installed in a control cabinet.