104-E265EN22

The Allen-Bradley 104-E265EN22 IEC 104 Contactor is a reversing AC/DC contactor with 3 main contacts or poles. It belongs to the 104-E large frame contactor family. The 104-E265EN22 Contactor is supplied with a standard universal AC/DC coil option with support for a built-in PLC circuit interface. This universal coil option has a low operating power rating to save energy and a wider coil voltage range that is suitable for a wide variety of applications. The coil’s low switching energy ratings of 24 Volts DC and 10 milliamps which enables it to connect directly to a PLC circuit without interposing relays. The operators can easily configure the coil switching voltage from the PLC. The 104-E265EN22 Contactor has an actuating voltage range of 100 to 250 Volts DC/100 to 250 Volts AC (at 50/60 Hertz). Power cables can be easily wired to the bolt-in type terminals labeled L1, L2, and L3 of the main contacts.

The Allen-Bradley 104-E265EN22 IEC 104 Contactor has a factory-supplied side-mounted mechanical interlock that interlocks adjacent contactors together for reversing mode operation. Two low-power snap-in, side-mounted auxiliary contacts (1 NO contact and 1 NC contact) are also supplied for the contactor’s feedback wiring. The 104-E265EN22 Contactor supports a complete line of accessories and parts, and these optional parts can be ordered to meet various application needs. The 104-E265EN22 Contactor supports AC or DC input voltage. The 3-phase AC input operating range is from 115 to 575 Volts AC and it can be supported directly by the main contacts. The 104-E265EN22 Contactor also accepts DC inputs with an operating range from 24 Volts DC to 440 Volts DC. The 104-E265EN22 Contactor has a maximum Horsepower output power rating of 200 Horsepower at 575 Volts AC (AC-3) and a maximum operating current rating of 265 Amps at 400 Volts AC.