2080-LC10-12DWD

The 2080-LC10-12DWD is a Micro 810 Programmable Logic Controller (PLC) from the Micro 800 series. This is a microcontroller with smart relay capability. It features embedded input and output channels which are comprised of Eight (8) 24 VDC discrete inputs; Four (4) Relay outputs and Four (4) 0-10 VDC analog input that is shared with DC inputs. This controller comes with an LCD and Real-Time Clock (RTC). It supports the execution of up to 2KB program steps of instructions and is capable of storing up to 4 Kbytes of data. User-defined program blocks may be used with this controller, configured in Ladder Diagram (LD), Function Block Diagram (FBD), and Structured Text. It supports 32-bit and 64-bit Floating point math calculation and Proportional + Integral + Derivative (PID) loop control. This controller is intended for DIN rail or direct panel mounting. The output relays of this controller are considered high-current outputs with a current rating of Eight (8) Amperes, eliminating the need for external relays or interposing circuits to drive high current loads. Compatible applications that can be served by this controller include temperature control, compressor control, and elevator control. This controller is ideal for direct communication with PanelView Component Human Machine Interface (HMI) and PowerFlex drives.

The Allen-Bradley’s 2080-LC10-12DWD is a part of the Micro810 Programmable Logic Controller series. It is a 4-Relay Output Controller with an 8 to 12 Volts DC input. It is an ideal device for those (end users, machine builders, etc) who are looking for a control solution to apply to smaller-scale applications, but which is also cost-effective. Allen Bradley’s Programmable Micro810 controllers, including the 2080-LC10-12DWD, are nano-sized modules with a minimal footprint. These Logic Controllers have high current output as well as the programming capabilities of smaller PLCs. They have similar accessories and parts to the other Micro PLCs in this family of products. This module, being available in a 12 pt version, with 8 A outputs that drop the need for external relays, is the smallest of the whole Micro800 family. The Micro810 controller includes several smart, embedded relay function blocks that can be configured from a 1.5 inch LCD keypad. The 2080-LC10-12DWD controller acts as a smart relay with high current relay outputs but has instead the programming capabilities of a micro PLC. Most applications for the 2080-LC10-12DWD controller need installation in an industrial enclosure to reduce the effects of electrical interference and environmental exposure. The 2080-LC10-12DWD must be located as far as possible from power lines, load lines, and other sources of electrical noise such as hard-contact switches, relays, and AC motor drives.