DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1775-54BA. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1775-54BA has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1775-54BA units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1775-54BA has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1775-54BA units instead of migration.
sThe 1775-54BA is manufactured by Allen Bradley and is an I/O module for the PLC 3 system. The PLC 3 system supports 2048 inputs and 2048 outputs with a maximum of 2 scanners supported. This system can be panel mounted or mounted on a 19 inch rack mount; the power supply requirements are 115 Volts AC or 230 Volts AC, while the input voltage can vary from a range of 97 Volts to 132 Volts, in case of 115 Volts AC; in the case of 230 Volts AC, the input voltage can vary from 194 to 264 Volts AC.
When replacing the 1775-54BA, ensure that the power to the system is turned OFF and the safety measures as recommended by the manufacturer are followed. The replacement of the device needs to be performed by persons trained on the system to ensure safety and to prevent damage to the system. It is recommended that this system’s users wear ESD protective straps in order to prevent electrostatic discharge and to avoid damaging the equipment. The instructions given by the manufacturer should be followed in order to ensure proper functioning of the device; before turning ON the system, it is recommended to check that all the cables are connected correctly and that the covers are secured in place, as per the procedure. The 1775-54BA needs to be operated in an environment that has an ambient temperature between 0 to 60 degrees Celsius and should be stored in an environment that has a temperature between -40 to 85 degrees Celsius. The humidity of this environment should be non condensing between 5 and 95%, and this module is UL listed and CE certified.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1775-54BA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1775-54BA such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1775-54BA Ser A
|
1775-54BA/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1775-54BA has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1775-54BA units instead of migration.
The 1775-54BA is manufactured by Allen Bradley and is an I/O module for the PLC 3 system. The PLC 3 system supports 2048 inputs and 2048 outputs with a maximum of 2 scanners supported. This system can be panel mounted or mounted on a 19 inch rack mount; the power supply requirements are 115 Volts AC or 230 Volts AC, while the input voltage can vary from a range of 97 Volts to 132 Volts, in case of 115 Volts AC; in the case of 230 Volts AC, the input voltage can vary from 194 to 264 Volts AC.
When replacing the 1775-54BA, ensure that the power to the system is turned OFF and the safety measures as recommended by the manufacturer are followed. The replacement of the device needs to be performed by persons trained on the system to ensure safety and to prevent damage to the system. It is recommended that this system’s users wear ESD protective straps in order to prevent electrostatic discharge and to avoid damaging the equipment. The instructions given by the manufacturer should be followed in order to ensure proper functioning of the device; before turning ON the system, it is recommended to check that all the cables are connected correctly and that the covers are secured in place, as per the procedure. The 1775-54BA needs to be operated in an environment that has an ambient temperature between 0 to 60 degrees Celsius and should be stored in an environment that has a temperature between -40 to 85 degrees Celsius. The humidity of this environment should be non condensing between 5 and 95%, and this module is UL listed and CE certified.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1775-54BA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1775-54BA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1775-54BA such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1775-54BA Ser A
|
1775-54BA/A, Series A, Rev A | Request Quote |