1775-MEDA | Allen Bradley PLC PLC 3

1775-MEDA

Rated 4.3 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1775-MEDA

Revisions: Ser A 
Description: The Allen-Bradley 1775-MEDA PLC-3 Error Correcting Memory Module is a 128K Static CMOS RAM module with Error Detection and Correction (EDC) installed on a single slot of the Allen-Bradley PLC-3 1775-A1, -A2), and PLC-3/10 1775-A3 processor chassis. The memory module assembly comes with a lithium (1770-XR) or nickel (1770-BH) battery which provides backup power for the memory module in the case of power failure from the PLC-3 power supply, and both batteries have a maximum backup time of 150 days (1770-XR) and 45 hours (1770-BH) at up to 60 °C. read more...
Call
Request a quote for 1775-MEDA

Description: The Allen-Bradley 1775-MEDA PLC-3 Error Correcting Memory Module is a 128K Static CMOS RAM module with Error Detection and Correction (EDC) installed on a single slot of the Allen-Bradley PLC-3 1775-A1, -A2), and PLC-3/10 1775-A3 processor chassis. The memory module assembly comes with a lithium (1770-XR) or nickel (1770-BH) battery which provides backup power for the memory module in the case of power failure from the PLC-3 power supply, and both batteries have a maximum backup time of 150 days (1770-XR) and 45 hours (1770-BH) at up to 60 °C. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1775-MEDA.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.3 with 11 reviews

    Technical Specifications for 1775-MEDA

ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1775-MEDA has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1775-MEDA units instead of migration.

ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1775-MEDA has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1775-MEDA units instead of migration.

s

About 1775-MEDA

The Allen-Bradley 1775-MEDA PLC-3 Error Correcting Memory Module is a 128K Static CMOS RAM module with Error Detection and Correction (EDC) installed on a single slot of the Allen-Bradley PLC-3 1775-A1, -A2), and PLC-3/10 1775-A3 processor chassis. The memory module assembly comes with a lithium (1770-XR) or nickel (1770-BH) battery which provides backup power for the memory module in the case of power failure from the PLC-3 power supply, and both batteries have a maximum backup time of 150 days (1770-XR) and 45 hours (1770-BH) at up to 60 °C. The 1775-MEDA monitors memory errors using either Error Detection and Correction (EDC) method which detect and correct soft and hard-bit memory errors automatically without disturbing the system operation, or it monitors memory errors by keeping tab of the accumulated total of the number of memory accesses in which an error is encountered.





The 1775-MEDA has a memory capacity of 128 KB, and it draws a 1.8A back-plain current from the chassis at 5V DC and 0.15A at 15V. The memory module is installed on the chassis by inserting and guiding the module into the plastic tracks on the top and bottom of the slot, and by securing its position on the chassis by snapping the chassis latch on the module. The module’s thumbnail switch is set, to address the module with a unique number.  The 1775-MEDA has an operating temperature range of 0-60 °C (32-140 °F) at 5 to 95% non-condensing relative humidity range, and it has a storage temperature range of 0-85 °C (-40-185 °F).



Technical Description of 1775-MEDA

MEMORY

Repair Services for 1775-MEDA

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1775-MEDA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1775-MEDA

Please refer to the manual for more information about the 1775-MEDA such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1775-MEDA Ser A
1775-MEDA/A, Series A, Rev A Request Quote
Common misspellings:
  • l775-MEDA
  • 1775MEDA

Dimensions For 1775-MEDA

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1775-MEDA

Resolutions For 1775-MEDA

About

Technical Specifications for 1775-MEDA

ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete
ManufacturerRockwell Automation
BrandAllen-Bradley
Product Lifecycle Status*Discontinued/Obsolete

*The Allen Bradley 1775-MEDA has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1775-MEDA units instead of migration.

About 1775-MEDA

The Allen-Bradley 1775-MEDA PLC-3 Error Correcting Memory Module is a 128K Static CMOS RAM module with Error Detection and Correction (EDC) installed on a single slot of the Allen-Bradley PLC-3 1775-A1, -A2), and PLC-3/10 1775-A3 processor chassis. The memory module assembly comes with a lithium (1770-XR) or nickel (1770-BH) battery which provides backup power for the memory module in the case of power failure from the PLC-3 power supply, and both batteries have a maximum backup time of 150 days (1770-XR) and 45 hours (1770-BH) at up to 60 °C. The 1775-MEDA monitors memory errors using either Error Detection and Correction (EDC) method which detect and correct soft and hard-bit memory errors automatically without disturbing the system operation, or it monitors memory errors by keeping tab of the accumulated total of the number of memory accesses in which an error is encountered.





The 1775-MEDA has a memory capacity of 128 KB, and it draws a 1.8A back-plain current from the chassis at 5V DC and 0.15A at 15V. The memory module is installed on the chassis by inserting and guiding the module into the plastic tracks on the top and bottom of the slot, and by securing its position on the chassis by snapping the chassis latch on the module. The module’s thumbnail switch is set, to address the module with a unique number.  The 1775-MEDA has an operating temperature range of 0-60 °C (32-140 °F) at 5 to 95% non-condensing relative humidity range, and it has a storage temperature range of 0-85 °C (-40-185 °F).



Technical Description of 1775-MEDA

MEMORY
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1775-MEDA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1775-MEDA. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1775-MEDA such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1775-MEDA Ser A
1775-MEDA/A, Series A, Rev A Request Quote

Common misspellings:
  • l775-MEDA
  • 1775MEDA
PDF