DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1775-MZ. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1775-MZ has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1775-MZ units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1775-MZ has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1775-MZ units instead of migration.
sThe 1775-MZ is a Memory Communication Module for use in the installation of the 1775-MCM1 (gearbox configuration) and a 1775-MCM2 high-speed memory interface for the PLC3. The 1775-MZ module has five LED indicators on the front panel, including a pass indicator that is colored green, a fail indicator that is colored red, an MZ sending indicator that is colored green, an MZ receiving indicator, also colored green, and a communication error indicator, colored red. The combination of the Pass Indicator (green) and the Fail Indicator (red) provides general status information about the 1775-MZ module. When the pass indicator is on and the fail indicator is off, the module is in normal operation. When the pass indicator is off and the fail indicator is on, the module has a fault. When both the pass indicator and the fail indicator are on, the module should be powered up or reset. When both the pass indicator and the fail indicator are off, the module has lost power. When a command is sent to the remote interface, the MZ sending indicator (green) comes on and stays on until the remote interface sends a command. Likewise, the MZ receiving indicator (green) is lit every time the module receives a command from the remote interface and stays lit until the remote interface sends a command. Whenever there is a checksum, parity or other communication error, the communication error indicator (red) blinks. If the first word of the 1775-MZ is created, the indicator remains on until the communication error bit is reset. Otherwise, the indicator blinks once for every error detected.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1775-MZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1775-MZ such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1775-MZ Ser A
|
1775-MZ/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1775-MZ has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1775-MZ units instead of migration.
The 1775-MZ is a Memory Communication Module for use in the installation of the 1775-MCM1 (gearbox configuration) and a 1775-MCM2 high-speed memory interface for the PLC3. The 1775-MZ module has five LED indicators on the front panel, including a pass indicator that is colored green, a fail indicator that is colored red, an MZ sending indicator that is colored green, an MZ receiving indicator, also colored green, and a communication error indicator, colored red. The combination of the Pass Indicator (green) and the Fail Indicator (red) provides general status information about the 1775-MZ module. When the pass indicator is on and the fail indicator is off, the module is in normal operation. When the pass indicator is off and the fail indicator is on, the module has a fault. When both the pass indicator and the fail indicator are on, the module should be powered up or reset. When both the pass indicator and the fail indicator are off, the module has lost power. When a command is sent to the remote interface, the MZ sending indicator (green) comes on and stays on until the remote interface sends a command. Likewise, the MZ receiving indicator (green) is lit every time the module receives a command from the remote interface and stays lit until the remote interface sends a command. Whenever there is a checksum, parity or other communication error, the communication error indicator (red) blinks. If the first word of the 1775-MZ is created, the indicator remains on until the communication error bit is reset. Otherwise, the indicator blinks once for every error detected.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1775-MZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1775-MZ. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1775-MZ such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1775-MZ Ser A
|
1775-MZ/A, Series A, Rev A | Request Quote |