DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1775-P2. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1775-P2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1775-P2 units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1775-P2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1775-P2 units instead of migration.
sThe Allen-Bradley 1775-P2 is the multi-output power supply module for the Allen-Bradley PLC-3/10 programmable controller. The 1775-P2 requires 115-230V AC input at 47 – 63 Hz frequency. The outputs available for it are as follows: +5V DC of output at 28A, +15V DC of output at 3A, and -15V DC of output at 3A. The 1775-P2 power supply module and the PLC-3/10 processor module (1775-L4) are installed in the Allen-Bradley 1775-A3 chassis.
The 1775-P2 power supply is a modular, multiple-processor industrial controller. The PLC-3/1 chassis that it is installed in houses individual 1775-P2 modules. The PLC-3/10 main processor module provides 6 module slots that are contained on the front panel and it provides program execution, memory management, and inter-module communication control powered by the 1775-P2. To do this, it requires one module slot in the processor chassis to be dedicated to the 1775-P2 power supply module.
The PLC-3/10 memory modules store the program information, the data table information, and the other information that is needed for processor operation. All 4 memory modules have error detecting and correcting (EDC) capability. The modules differ in the amount of memory capacity that they have.
To prevent damage to the components and to prevent operator injury, the system power should be shut off before removing or inserting the 1775-P2 processor module in the PLC-3/10 chassis. The 1775-P2 processor module should not be inserted into the PLC-3 chassis (cat. no. 1775-Al, -A2) as it is not compatible with the PLC-3 programmable controller.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1775-P2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1775-P2 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1775-P2 Ser A
|
1775-P2/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1775-P2 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1775-P2 units instead of migration.
The Allen-Bradley 1775-P2 is the multi-output power supply module for the Allen-Bradley PLC-3/10 programmable controller. The 1775-P2 requires 115-230V AC input at 47 – 63 Hz frequency. The outputs available for it are as follows: +5V DC of output at 28A, +15V DC of output at 3A, and -15V DC of output at 3A. The 1775-P2 power supply module and the PLC-3/10 processor module (1775-L4) are installed in the Allen-Bradley 1775-A3 chassis.
The 1775-P2 power supply is a modular, multiple-processor industrial controller. The PLC-3/1 chassis that it is installed in houses individual 1775-P2 modules. The PLC-3/10 main processor module provides 6 module slots that are contained on the front panel and it provides program execution, memory management, and inter-module communication control powered by the 1775-P2. To do this, it requires one module slot in the processor chassis to be dedicated to the 1775-P2 power supply module.
The PLC-3/10 memory modules store the program information, the data table information, and the other information that is needed for processor operation. All 4 memory modules have error detecting and correcting (EDC) capability. The modules differ in the amount of memory capacity that they have.
To prevent damage to the components and to prevent operator injury, the system power should be shut off before removing or inserting the 1775-P2 processor module in the PLC-3/10 chassis. The 1775-P2 processor module should not be inserted into the PLC-3 chassis (cat. no. 1775-Al, -A2) as it is not compatible with the PLC-3 programmable controller.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1775-P2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1775-P2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1775-P2 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1775-P2 Ser A
|
1775-P2/A, Series A, Rev A | Request Quote |