Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PLC 5 1771-CP1

Product image is representative; revision or series may vary. Contact us to request a specific version.

1771-CP1

|
Need a Specific Revision?

Allen Bradley PLC 5 Cable Assembly, 1.04 ft (0.32 m), Connects Panel-Mounted I/O Chassis to Chassis-Mounted 1771-P7 Power Supply

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1771-CP1

ManufacturerAllen Bradley
CategoryPLCs
Product LinePLC 5
Part Number1771-CP1
UPC612598001552
Weight0.31 lbs (0.14 kg)
Module TypeCable Assembly
Intended ConnectionConnects Panel-Mounted I/O Chassis to Chassis-Mounted 1771-P7 Power Supply
Length1.04 ft (0.32 m)
Slots1 Slot
Backplane Current1.0 Amps max
Wiring Arm1771-WN
Module Scan Time1.3-5 ms
Storage Temperature-40-185 F (-40-85 C)
CoatingConformal Coat
View as PDF
Request a Repair

The Allen-Bradley 1771-CP1 PLC-5 Power Cable Assembly is an I/O Chassis Cable assembly for the Allen-Bradley PLC-5 1771-P7 Power Supply that is used for connecting the 1771 Power supply module to the Allen-Bradley 1771 A1B, A2B, A3B, or A4B I/O chassis. The 1771-CP1 Power Cable has a flexible design which allows for considerable bending without stress or breaking, and it has two connector ends with connector screws for tightening. It has a maximum cable length of 0.32 meters (1.04 feet) connecting a Panel-Mounted I/O Chassis to a Chassis-Mounted 1771-P7 Power Supply, and it has 2 D-Shell Connecting ends with connecting screws.

When installing a panel-mounted I/O chassis together with the power supply, one end of the 1771-CP1 cable is connected to the D-shell connector of the I/O chassis and the connecting screws are tightened, and the other end of the cable is connected to the D-shell connector on the bottom of the power supply, and the connecting screws tightened. Also when mounting the power supply separately from the I/O chassis, the power supply is mounted within the limit of the 1771-CP1’s cable length, and one end of the cable connected to the D-Shell connector of the power supply with a screw torque of 12 pounds on an inch, and the other is connected to the D-shell connector on the I/O chassis with the same screw torque. It has an operating temperature range of 32 to 140 degrees Fahrenheit at 5 to 95% non-condensing relative humidity, with a storage limit of -40 to 185 degrees Fahrenheit, and it is CE certified.

Revision Part #Also known as
1771-CP1 Ser A1771-CP1/A, Series A, Rev A
Don't see your particular revision? Contact us now.