1771-HS3CR - In Stock | Allen Bradley PLC PLC 5

1771-HS3CR

Rated 4.6 with 4 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1771-HS3CR

Revisions: Ser A 
Description: The 1771-HS3CR servo controller module is a 3-axis servo controller module from the Allen-Bradley/Rockwell Automation PLC 5 series. It uses the Allen-Bradley/Rockwell Automation PLC 5 series 1771-PS7 power supply module that is rated at 120 Volts AC and 1 Amp. The 1771-HS3CR servo controller module has several connector ports on its front panel, including a power port, an RS-232 port, and an axis e-stop port. The power port connects the servo controller to the power supply, and the RS-232 port handles the uploading and downloading of different programs and parameters. The axis e-stop port on the 1771-HS3CR servo controller module is a 50-pin I/O connector port that can provide fast I/O power.
In Stock Ships Today
Request a quote for 1771-HS3CR

Description: The 1771-HS3CR servo controller module is a 3-axis servo controller module from the Allen-Bradley/Rockwell Automation PLC 5 series. It uses the Allen-Bradley/Rockwell Automation PLC 5 series 1771-PS7 power supply module that is rated at 120 Volts AC and 1 Amp. The 1771-HS3CR servo controller module has several connector ports on its front panel, including a power port, an RS-232 port, and an axis e-stop port. The power port connects the servo controller to the power supply, and the RS-232 port handles the uploading and downloading of different programs and parameters. The axis e-stop port on the 1771-HS3CR servo controller module is a 50-pin I/O connector port that can provide fast I/O power.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1771-HS3CR.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 4 reviews

    Technical Specifications for 1771-HS3CR

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-HS3CR
Module Type3 Axis Servo Controller Module
Fuse Voltage120 Volts
Max Input Frequency250 Kilohertz Differential Input
Outputs+/- 10 Volt DC Analog Command
Slots2 Slots Per ES
Module Update Period2 ms/axis
Backplane Current1.7 Amperes
Wiring Arm1771-WB
Wiring Arm1771-WA
Pulse Capture Time50-9.999 Microseconds
Dimensions3.5 x 6.5 x 2.0 in (89 x 165 x 51 mm)
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-HS3CR
Module Type3 Axis Servo Controller Module
Fuse Voltage120 Volts
Max Input Frequency250 Kilohertz Differential Input
Outputs+/- 10 Volt DC Analog Command
Slots2 Slots Per ES
Module Update Period2 ms/axis
Backplane Current1.7 Amperes
Wiring Arm1771-WB
Wiring Arm1771-WA
Pulse Capture Time50-9.999 Microseconds
Dimensions3.5 x 6.5 x 2.0 in (89 x 165 x 51 mm)
s

About 1771-HS3CR

The 1771-HS3CR PLC5 IMC-123 3-Axis Servo Controller by Allen-Bradley is a 3-axis servo controller that can be installed in any 1771 I/O chassis. It comes in a package with a memory module, a power module, an encoder module, a resolver, and an optional hand-held pendant. The 1771-HS3CR is a unique servo controller with 3-axis capability, which uses the 120V AC, the 1A 1771-PS7 power supply module connected through the 1771-CAS, 9-pin connecting cable, and the 96KB 1771-HM3A battery-backed memory cartridges that are used for storing the controller’s AMP parameters and MML downloaded programs. The controller receives encoder feedback signals, resolver feedback signals, E-stop status and E-stop starting signals via an Axis E-stop, 50-pin I/O connector, which can also be used for providing fast I/O power.





The 1771-HS3CR uses the RS-232 connector port on the front-side for uploading and downloading of all MML programs or the AMP parameters to the battery-backed memory module, and it can also be used for connection to the T45 and T50 ODS via the hand-held pendant for debugging the MML programs and hardware connected to it. The controller provides encoder feedback via its isolated, 10V DC output and a 250 KHz differential, single-ended input. The 1771-HS3CR has an operating temperature range of around 0-60oC at a relative humidity range of 5-95% without condensation. The controller weighs approximately 1.36Kg, with net dimensions of 11in x 7in x 3in, and it is c-UL, C-TICK, and CE-certified.



Technical Description of 1771-HS3CR

Allen Bradley PLC 5 3 Axis Servo Controller Module

Repair Services for 1771-HS3CR

Type Lead Time Price Action
Repair Service 2-4 weeks $864cartAdd to Cart

Our highly skilled technicians can repair your 1771-HS3CR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1771-HS3CR

Please refer to the manual for more information about the 1771-HS3CR such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-HS3CR Ser A
1771-HS3CR/A, Series A, Rev A Request Quote
Common misspellings:
  • l771-HS3CR
  • 177l-HS3CR
  • 1771HS3CR

Dimensions For 1771-HS3CR

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1771-HS3CR

Resolutions For 1771-HS3CR

About

Technical Specifications for 1771-HS3CR

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-HS3CR
Module Type3 Axis Servo Controller Module
Fuse Voltage120 Volts
Max Input Frequency250 Kilohertz Differential Input
Outputs+/- 10 Volt DC Analog Command
Slots2 Slots Per ES
Module Update Period2 ms/axis
Backplane Current1.7 Amperes
Wiring Arm1771-WB
Wiring Arm1771-WA
Pulse Capture Time50-9.999 Microseconds
Dimensions3.5 x 6.5 x 2.0 in (89 x 165 x 51 mm)
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-HS3CR
Module Type3 Axis Servo Controller Module
Fuse Voltage120 Volts
Max Input Frequency250 Kilohertz Differential Input
Outputs+/- 10 Volt DC Analog Command
Slots2 Slots Per ES
Module Update Period2 ms/axis
Backplane Current1.7 Amperes
Wiring Arm1771-WB
Wiring Arm1771-WA
Pulse Capture Time50-9.999 Microseconds
Dimensions3.5 x 6.5 x 2.0 in (89 x 165 x 51 mm)

About 1771-HS3CR

The 1771-HS3CR PLC5 IMC-123 3-Axis Servo Controller by Allen-Bradley is a 3-axis servo controller that can be installed in any 1771 I/O chassis. It comes in a package with a memory module, a power module, an encoder module, a resolver, and an optional hand-held pendant. The 1771-HS3CR is a unique servo controller with 3-axis capability, which uses the 120V AC, the 1A 1771-PS7 power supply module connected through the 1771-CAS, 9-pin connecting cable, and the 96KB 1771-HM3A battery-backed memory cartridges that are used for storing the controller’s AMP parameters and MML downloaded programs. The controller receives encoder feedback signals, resolver feedback signals, E-stop status and E-stop starting signals via an Axis E-stop, 50-pin I/O connector, which can also be used for providing fast I/O power.





The 1771-HS3CR uses the RS-232 connector port on the front-side for uploading and downloading of all MML programs or the AMP parameters to the battery-backed memory module, and it can also be used for connection to the T45 and T50 ODS via the hand-held pendant for debugging the MML programs and hardware connected to it. The controller provides encoder feedback via its isolated, 10V DC output and a 250 KHz differential, single-ended input. The 1771-HS3CR has an operating temperature range of around 0-60oC at a relative humidity range of 5-95% without condensation. The controller weighs approximately 1.36Kg, with net dimensions of 11in x 7in x 3in, and it is c-UL, C-TICK, and CE-certified.



Technical Description of 1771-HS3CR

Allen Bradley PLC 5 3 Axis Servo Controller Module
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $864cartAdd to Cart

Our highly skilled technicians can repair your 1771-HS3CR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $864cartAdd to Cart

Our highly skilled technicians can repair your 1771-HS3CR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1771-HS3CR such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-HS3CR Ser A
1771-HS3CR/A, Series A, Rev A Request Quote

Common misspellings:
  • l771-HS3CR
  • 177l-HS3CR
  • 1771HS3CR
PDF