Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PLC 5 1771-IE05

Product image is representative; revision or series may vary. Contact us to request a specific version.

1771-IE05

|

The Allen-Bradley 1771-IE05 Analog Input Module is part of the PLC 5 series. It is an intelligent module that isĀ intended to interface the analog inputs and PLC processors through block transfer programming.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1771-IE05

ManufacturerAllen Bradley
CategoryPLCs
Product LinePLC 5
Part Number1771-IE05
Weight1.00 lbs (0.45 kg)
Module TypeAnalog Input Module
Bulletin1771
InterfaceingBlock Transfer Programming
Resolution8-bit
FunctionConversions of Analog to Digital Signals
Inputs8
Voltage0 – 10V DC
Maximum OFF-State Current1.7 mA DC/AC
Backplane Current Load400 mA at 5V DC
Wiring Arm1771-WB
InstallationI/O Chassis

The 1771-IE05 input moduleĀ is an analog input module that has been manufactured by Allen-Bradley/Rockwell Automation. It is a member of the Allen-BradleyĀ PLC 5 product line. This intelligent module is designed to interface with analog inputs as well as with PLC processors via block transfer programming. The 1771-IE05 input moduleĀ uses a maximum of 8-bit resolution and it provides the required conversions of analog to digital signals and vice versa to interface the analog signals by using the PLC data table values. This module is suitable forĀ a variety of applications, including temperature and pressure sensing, flow metering, and level sensing applications.

The Allen-Bradley 1771-IE05 module comes with 8 single-ended inputs and operates on a voltage rating of 0 toĀ 10 Volts DC and a maximum off-state current of 1.7 milliamps AC/DC. Other specifications of this unit include 400 milliamps of backplane current load at 5 Volts DC, a typical signal delay of 24 milliseconds in an on/offĀ AC state, 10 milliseconds in the onĀ DC state, and 20 milliseconds in the offĀ DC state. The 1771-IE05 module comes with the 1771-WB wiring arm that replaces the module, eliminating the need to disconnect the wiring. The unit requires a single slot for installation in the I/O chassis and keying in bands for correct installation between pins 26 andĀ 28 for the upper connector, and pins 4 andĀ 6 for the lower connector. The Allen-Bradley 1771-IE05 module features a red "FAULT" indicator and a green "RUN" indicator onĀ the front panel. The unit also contains optoelectrical isolation to guard the system circuits against electrical transients and an input filtering feature that reduces electrical noise.