DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1771-IG. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-IG |
Module Type | Digital DC Input Module |
Number of Inputs | 8 Inputs |
Voltage Category | 5 Volts DC, TTL |
DC Operating Voltage | 5.0-5.3 Volts |
Backplane Current | 122 Miliamperes |
Max DC Off-State Current | N/A |
Typical DC Signal Delay (On) | < 1 ms |
Typical DC Signal Delay (Off) | < 1 ms |
Wiring Arm | 1771-WC |
Coating | Conformal Coat |
Typical AC Signal Delay (Off) | 24 (+/- 10) ms |
Typical DC Signal Delay (Off) | 20 (+/- 9) ms |
Mounting | Rack Mountable |
UPC | 10612598002310 |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-IG |
Module Type | Digital DC Input Module |
Number of Inputs | 8 Inputs |
Voltage Category | 5 Volts DC, TTL |
DC Operating Voltage | 5.0-5.3 Volts |
Backplane Current | 122 Miliamperes |
Max DC Off-State Current | N/A |
Typical DC Signal Delay (On) | < 1 ms |
Typical DC Signal Delay (Off) | < 1 ms |
Wiring Arm | 1771-WC |
Coating | Conformal Coat |
Typical AC Signal Delay (Off) | 24 (+/- 10) ms |
Typical DC Signal Delay (Off) | 20 (+/- 9) ms |
Mounting | Rack Mountable |
UPC | 10612598002310 |
The Allen-Bradley 1771-IG is a PLC 5 Digital DC Input Module. It converts DC signals provided by user devices to the logic level needed by the processor. It controls the corresponding bits state in PLC data table. It provides a modular design with space-saving and pocket-friendly means to add input to a PLC control system. It has a 1771-WC wiring arm for replacing the module, eliminating the need for disconnecting the wiring. It is a series A module and it supports ½, 1, and 2-slot I/O addressing. It has applications in TTL interfaces and BCD interfaces encoders.
The 1771-IG module has 8 inputs with 5V DC TTL voltage category. It has an operating voltage range of 5.0 – 5.3V DC and is TTL-compatible. It has an input signal delay of less than 1ms. It has a maximum customer supply current per module of 500mA and a backplane current load of 122mA. It has a maximum power dissipation of 3.3W and a maximum thermal dissipation of 11.3 BTU/hr. It is installed in a 1771 I/O chassis containing a PLC processor. Keying bands for putting it in the right slot are between pins 34 and 36 for the upper connector and pins 4 and 6 for the lower connector.
The 1771-IG module contains eight status indicators for sensing TTL voltages at the front panel. It has optoelectrical isolation to protect the system circuits from electrical transients and an input filtering feature for reducing electrical noise.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-IG. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-IG such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-IG Ser A
|
1771-IG/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-IG |
Module Type | Digital DC Input Module |
Number of Inputs | 8 Inputs |
Voltage Category | 5 Volts DC, TTL |
DC Operating Voltage | 5.0-5.3 Volts |
Backplane Current | 122 Miliamperes |
Max DC Off-State Current | N/A |
Typical DC Signal Delay (On) | < 1 ms |
Typical DC Signal Delay (Off) | < 1 ms |
Wiring Arm | 1771-WC |
Coating | Conformal Coat |
Typical AC Signal Delay (Off) | 24 (+/- 10) ms |
Typical DC Signal Delay (Off) | 20 (+/- 9) ms |
Mounting | Rack Mountable |
UPC | 10612598002310 |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-IG |
Module Type | Digital DC Input Module |
Number of Inputs | 8 Inputs |
Voltage Category | 5 Volts DC, TTL |
DC Operating Voltage | 5.0-5.3 Volts |
Backplane Current | 122 Miliamperes |
Max DC Off-State Current | N/A |
Typical DC Signal Delay (On) | < 1 ms |
Typical DC Signal Delay (Off) | < 1 ms |
Wiring Arm | 1771-WC |
Coating | Conformal Coat |
Typical AC Signal Delay (Off) | 24 (+/- 10) ms |
Typical DC Signal Delay (Off) | 20 (+/- 9) ms |
Mounting | Rack Mountable |
UPC | 10612598002310 |
The Allen-Bradley 1771-IG is a PLC 5 Digital DC Input Module. It converts DC signals provided by user devices to the logic level needed by the processor. It controls the corresponding bits state in PLC data table. It provides a modular design with space-saving and pocket-friendly means to add input to a PLC control system. It has a 1771-WC wiring arm for replacing the module, eliminating the need for disconnecting the wiring. It is a series A module and it supports ½, 1, and 2-slot I/O addressing. It has applications in TTL interfaces and BCD interfaces encoders.
The 1771-IG module has 8 inputs with 5V DC TTL voltage category. It has an operating voltage range of 5.0 – 5.3V DC and is TTL-compatible. It has an input signal delay of less than 1ms. It has a maximum customer supply current per module of 500mA and a backplane current load of 122mA. It has a maximum power dissipation of 3.3W and a maximum thermal dissipation of 11.3 BTU/hr. It is installed in a 1771 I/O chassis containing a PLC processor. Keying bands for putting it in the right slot are between pins 34 and 36 for the upper connector and pins 4 and 6 for the lower connector.
The 1771-IG module contains eight status indicators for sensing TTL voltages at the front panel. It has optoelectrical isolation to protect the system circuits from electrical transients and an input filtering feature for reducing electrical noise.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-IG. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-IG. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-IG such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-IG Ser A
|
1771-IG/A, Series A, Rev A | Request Quote |