DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1771-LC1. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1771-LC1 |
Description | Loop controller |
Communication | RS 485 |
Temperature | 5-50 degrees Celsius |
Humidity | 0-95% |
Voltage | 120 Volts AC |
Module | LCD / Keys |
Number of User-Defined Keys | 8 |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1771-LC1 |
Description | Loop controller |
Communication | RS 485 |
Temperature | 5-50 degrees Celsius |
Humidity | 0-95% |
Voltage | 120 Volts AC |
Module | LCD / Keys |
Number of User-Defined Keys | 8 |
The 1771-LC1 controller is an Allen-Bradley manufactured Foxboro Loop controller. It comes with a voltage rating of 120 Volts AC. The loop controller is controlled by using a built-in microprocessor. The processor is used to actively monitor and control a variety of application processes. For networking and communication, the loop controller is equipped with an RS-485 module. The front section of the loop controller has a display unit along with 8 user-defined keys. The display screen is an LCD unit which is capable of showing 2 lines of alpha-numeric characters along with 50 segment bar graphs. The keys on the controller are the navigational key, the select key, the tag, and the acknowledge key.
The 1771-LC1 loop controller comes with L1, L2, and ground (GND) terminals on the rear side of the loop controller. The loop controller can be mounted to a wall or on the factory floor by using bolt screws. The display unit shows different parameters. This loop controller module is fully tested to meet the EMC and European standards and requirements. The 1771-LC1 controller comes with an I/O technique which is used to connect the loop controller with a personal computer. The controller allows a PC to interface with an input and output module by using the same location address in different I/O chassis. The operating temperature of the 1771-LC1 controller should be maintained between 5 and 50 degrees Celsius in an environment with up to 95% relative humidity. The loop controller is fully compatible with Allen-Bradley brand PLC 2 and PLC 5 controllers.
The 1771-LC1 controller is a loop controller by Allen-Bradley. It is compatible with PLC controllers.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-LC1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1771-LC1 |
Description | Loop controller |
Communication | RS 485 |
Temperature | 5-50 degrees Celsius |
Humidity | 0-95% |
Voltage | 120 Volts AC |
Module | LCD / Keys |
Number of User-Defined Keys | 8 |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1771-LC1 |
Description | Loop controller |
Communication | RS 485 |
Temperature | 5-50 degrees Celsius |
Humidity | 0-95% |
Voltage | 120 Volts AC |
Module | LCD / Keys |
Number of User-Defined Keys | 8 |
The 1771-LC1 controller is an Allen-Bradley manufactured Foxboro Loop controller. It comes with a voltage rating of 120 Volts AC. The loop controller is controlled by using a built-in microprocessor. The processor is used to actively monitor and control a variety of application processes. For networking and communication, the loop controller is equipped with an RS-485 module. The front section of the loop controller has a display unit along with 8 user-defined keys. The display screen is an LCD unit which is capable of showing 2 lines of alpha-numeric characters along with 50 segment bar graphs. The keys on the controller are the navigational key, the select key, the tag, and the acknowledge key.
The 1771-LC1 loop controller comes with L1, L2, and ground (GND) terminals on the rear side of the loop controller. The loop controller can be mounted to a wall or on the factory floor by using bolt screws. The display unit shows different parameters. This loop controller module is fully tested to meet the EMC and European standards and requirements. The 1771-LC1 controller comes with an I/O technique which is used to connect the loop controller with a personal computer. The controller allows a PC to interface with an input and output module by using the same location address in different I/O chassis. The operating temperature of the 1771-LC1 controller should be maintained between 5 and 50 degrees Celsius in an environment with up to 95% relative humidity. The loop controller is fully compatible with Allen-Bradley brand PLC 2 and PLC 5 controllers.
The 1771-LC1 controller is a loop controller by Allen-Bradley. It is compatible with PLC controllers.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-LC1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-LC1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.