DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1771-LIA2. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1771-LIA2 |
Description | High speed counter module |
Connection | RS 422 |
Load current | 0.72 Amperes |
Power rating | 4.5 watts |
Temperature | 0 to 50 degrees Celsius |
Max. output current | 60 mA |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1771-LIA2 |
Description | High speed counter module |
Connection | RS 422 |
Load current | 0.72 Amperes |
Power rating | 4.5 watts |
Temperature | 0 to 50 degrees Celsius |
Max. output current | 60 mA |
The 1771-LIA2 module is a high-speed counter module manufactured by Allen-Bradley. It can connect with up to 61 loop controllers at a time. It uses the RS-422 serial link for networking and communications. The output voltage rating of the controller ranges between 0 and 5 Volts DC. The maximum output current of the counter is 60 milliAmps. The 1771-LIA2 module has a load current of 0.72 Amps. It has a power rating of 4.5 Watts. It is compatible with Allen-Bradley PLC 5 device. This 1771 counter counts the incoming pulses from pulse generators, counters, and other devices. It returns a count to the controller for different application needs. The 1771-LIA2 module can be connected to a computer device for configuration.
The 1771-LIA2 module is mostly used for industrial applications. It counts the pulses which have been configured. The module supports three different types of frequency modes over a time interval that is set by the operators. The 1771-LIA2 module is equipped with an encoder and is compatible with a sensor. The counter can perform the real-time manipulation of pulses. The counter module uses a connector pin to connect the I/O and make the grounding connections. The outer layer of the counter is conformally coated, which helps it to withstand harsh environmental conditions. The 1771-LIA2 module has a small display unit on the front part which can show alpha numeric values and different status and information updates. It supports natural binary language. The operating temperature should range between 0 and 50 degrees Celsius.
The Allen-Bradley 1771-LIA2 module is a high-speed counter module. It supports output voltage from 0 to 5 Volts DC.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-LIA2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1771-LIA2 |
Description | High speed counter module |
Connection | RS 422 |
Load current | 0.72 Amperes |
Power rating | 4.5 watts |
Temperature | 0 to 50 degrees Celsius |
Max. output current | 60 mA |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1771-LIA2 |
Description | High speed counter module |
Connection | RS 422 |
Load current | 0.72 Amperes |
Power rating | 4.5 watts |
Temperature | 0 to 50 degrees Celsius |
Max. output current | 60 mA |
The 1771-LIA2 module is a high-speed counter module manufactured by Allen-Bradley. It can connect with up to 61 loop controllers at a time. It uses the RS-422 serial link for networking and communications. The output voltage rating of the controller ranges between 0 and 5 Volts DC. The maximum output current of the counter is 60 milliAmps. The 1771-LIA2 module has a load current of 0.72 Amps. It has a power rating of 4.5 Watts. It is compatible with Allen-Bradley PLC 5 device. This 1771 counter counts the incoming pulses from pulse generators, counters, and other devices. It returns a count to the controller for different application needs. The 1771-LIA2 module can be connected to a computer device for configuration.
The 1771-LIA2 module is mostly used for industrial applications. It counts the pulses which have been configured. The module supports three different types of frequency modes over a time interval that is set by the operators. The 1771-LIA2 module is equipped with an encoder and is compatible with a sensor. The counter can perform the real-time manipulation of pulses. The counter module uses a connector pin to connect the I/O and make the grounding connections. The outer layer of the counter is conformally coated, which helps it to withstand harsh environmental conditions. The 1771-LIA2 module has a small display unit on the front part which can show alpha numeric values and different status and information updates. It supports natural binary language. The operating temperature should range between 0 and 50 degrees Celsius.
The Allen-Bradley 1771-LIA2 module is a high-speed counter module. It supports output voltage from 0 to 5 Volts DC.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-LIA2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-LIA2. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.