Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PLC 5 1771-M1

Product image is representative; revision or series may vary. Contact us to request a specific version.

1771-M1

|
Need a Specific Revision?

The 1771-M1 module is an Allen-Bradley/Rockwell Automation stepper controller module. It is available from the Allen-Bradley PLC 5 series for applications in PLC 5 controller systems. The 1771-M1 stepper controller module makes up a complete stepper motor positioning assembly along with a wiring arm and a pulse output expander module. It is suitable for use in 1-axis and 3-axis machine applications. The 1771-M1 stepper controller module should not be used in the same chassis as another stepper controller module or have another stepper controller module installed in its chassis because this can cause machine and system errors.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1771-M1

ManufacturerAllen Bradley
CategoryPLCs
Product LinePLC 5
Part Number1771-M1
Weight1.25 lbs (0.57 kg)
Module TypeStepper Motor Controller Module
InputsN/A
Max Input FrequencyN/A
OutputsN/A
Slots1 Slot
Module Update PeriodN/A
Backplane Current1.75 Amperes
Wiring Arm1771-WH
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
MountingRack Mountable
View as PDF
Request a Repair

The 1771-M1 Stepper Controller Motor Module by Allen-Bradley is an integral component of the Stepper Motor Positioning Assembly (1771-QA), which allows for programmable control of most of the stepper motors in a Programmable Controller, and a single 1771-M1 stepper controller module can conveniently control and manage up to 3 pulse output expander modules. The 1771-M1 is installed on the 1771 I/O chassis and occupies a maximum of 1 chassis slot, and the module draws 1.75A maximum backplane current supplied by the I/O chassis. The 1771-M1 can manage one expander module per axis, and in total, it can control a maximum of 3 expander modules per 3 axes, and the entire module is keyed to the I/O chassis by connecting the module’s top connector between pins 2 and 4, and between pins 8 and 10. The 1771-M1 has a very wide operating temperature range of 5-605 oC (325-1405 oF), with a relative humidity rating of 5-95% without condensation, and it is stored at a very wide temperature range of -405-855 oC (-405-1855 oF).

Revision Part #Also known as
1771-M1 Ser A1771-M1/A, Series A, Rev A
Don't see your particular revision? Contact us now.