1771-NIV1 - In Stock | Allen Bradley PLC PLC 5

1771-NIV1

Rated 4.7 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1771-NIV1

Revisions: Ser A Ser B Ser C 
Description: The 1771-NIV1 input module is a high-resolution type of analog input module. It is manufactured by Allen-Bradley/Rockwell Automation in the PLC 5 series of controller components and accessories. The 1771-NIV1 analog input module has 8 input channels that can operate with voltage or current. The input voltage rating is 10 Volts and the input current rating is 20 milliamps. The 1771-NIV1 analog input module has isolation between its inputs to eliminate electrical noise and interference.
In Stock Ships Today
Request a quote for 1771-NIV1

Description: The 1771-NIV1 input module is a high-resolution type of analog input module. It is manufactured by Allen-Bradley/Rockwell Automation in the PLC 5 series of controller components and accessories. The 1771-NIV1 analog input module has 8 input channels that can operate with voltage or current. The input voltage rating is 10 Volts and the input current rating is 20 milliamps. The 1771-NIV1 analog input module has isolation between its inputs to eliminate electrical noise and interference.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A Ser B Ser C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1771-NIV1.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 14 reviews

    Technical Specifications for 1771-NIV1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-NIV1
Module TypeN-Series Analog I/O Module
Number of Inputs8 Inputs
Input TypesVoltage/Current
Input Resolution+/- 10 Volts DC (3.3 Microvolts/bit); +/- 20 Miliamperes (1.3 Microamperes/bit)
Number of Outputs0 Outputs
Output TypeN/A
Output ResolutionN/A
RTP ChoiceVoltage In, 1771-RTP4; Current In, 1771-RTP3
Backplane Current1.5 Amperes
Data FormatBDC or Natural Binary
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
UPC10612598122162
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-NIV1
Module TypeN-Series Analog I/O Module
Number of Inputs8 Inputs
Input TypesVoltage/Current
Input Resolution+/- 10 Volts DC (3.3 Microvolts/bit); +/- 20 Miliamperes (1.3 Microamperes/bit)
Number of Outputs0 Outputs
Output TypeN/A
Output ResolutionN/A
RTP ChoiceVoltage In, 1771-RTP4; Current In, 1771-RTP3
Backplane Current1.5 Amperes
Data FormatBDC or Natural Binary
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
UPC10612598122162
s

About 1771-NIV1

The Allen Bradley 1771-NIV1 is a low-noise, high-resolution module from the 1771-N module product family designed for interfacing with PLC5, PLC-3, and PLC-5/250 controllers. The 1771-N series modules achieve high resolution and accuracy by their use of 16-bit ADCs and 14-bit DACs. 1000V of isolation between channels prevents noise and other transients on any channel from affecting any other channel. The 1771-NIV1 is supplied with eight voltage input channels which are rated for ±10V and the module consumes 1.2A from the I/O backplane.



 



The voltage inputs for the 1771-NIV1 are made for a ±10.5V (±42mA, with a resistor) operating range, a 330µV/bit (15 bits with a sign bit) resolution and an impedance greater than 10megaohm. A maximum time of 9s is required by the module to detect an open input, and the rating for overvoltage protection is 140V AC RMS (continuous). The bandwidth range for the 1771-NIV1’s input signals is 9 Hz and the time required for updating per module is a maximum time of 25s. ±35 ppm/°C is the specification for gain drift whereas ±30µV/°C is the specification for offset drift. Specifications for under-voltage and overvoltage are -10.4V DC and +10.4V DC respectively. Specifications for calibration values are 0.0000V/10.0000V. The 1771-NIV1’s normal mode ratings for 50 /60 Hz are 50 dB / 60 dB and the typical value for common mode is 150 dB.



 



The manufacturer recommends using the 1771-NIV1 with the RTP-4 and also recommends removing I/O chassis power prior to module installation or servicing. The power dissipation specification for the 1771-N1V1 is 6W. The module performs optimally in industrial environments with temperatures ranging from 0 to 60°C (32 to 140°F) at 5 - 95% humidity (without condensation).



Technical Description of 1771-NIV1

Allen Bradley PLC 5 N-Series Analog I/O Module, 8 Inputs, 0 Outputs, 1.5 Amperes Backplane Current, BDC or Natural Binary Data Format

Repair Services for 1771-NIV1

Type Lead Time Price Action
Repair Service 2-4 weeks $1223cartAdd to Cart

Our highly skilled technicians can repair your 1771-NIV1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1771-NIV1

Please refer to the manual for more information about the 1771-NIV1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-NIV1 Ser A
1771-NIV1/A, Series A, Rev A Request Quote
1771-NIV1 Ser B
1771-NIV1/B, Series B, Rev B Request Quote
1771-NIV1 Ser C
1771-NIV1/C, Series C, Rev C Request Quote
Common misspellings:
  • l771-NIV1
  • 177l-NIV1
  • 1771-NIVl
  • 1771NIV1

Dimensions For 1771-NIV1

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1771-NIV1

Resolutions For 1771-NIV1

About

Technical Specifications for 1771-NIV1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-NIV1
Module TypeN-Series Analog I/O Module
Number of Inputs8 Inputs
Input TypesVoltage/Current
Input Resolution+/- 10 Volts DC (3.3 Microvolts/bit); +/- 20 Miliamperes (1.3 Microamperes/bit)
Number of Outputs0 Outputs
Output TypeN/A
Output ResolutionN/A
RTP ChoiceVoltage In, 1771-RTP4; Current In, 1771-RTP3
Backplane Current1.5 Amperes
Data FormatBDC or Natural Binary
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
UPC10612598122162
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-NIV1
Module TypeN-Series Analog I/O Module
Number of Inputs8 Inputs
Input TypesVoltage/Current
Input Resolution+/- 10 Volts DC (3.3 Microvolts/bit); +/- 20 Miliamperes (1.3 Microamperes/bit)
Number of Outputs0 Outputs
Output TypeN/A
Output ResolutionN/A
RTP ChoiceVoltage In, 1771-RTP4; Current In, 1771-RTP3
Backplane Current1.5 Amperes
Data FormatBDC or Natural Binary
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
UPC10612598122162

About 1771-NIV1

The Allen Bradley 1771-NIV1 is a low-noise, high-resolution module from the 1771-N module product family designed for interfacing with PLC5, PLC-3, and PLC-5/250 controllers. The 1771-N series modules achieve high resolution and accuracy by their use of 16-bit ADCs and 14-bit DACs. 1000V of isolation between channels prevents noise and other transients on any channel from affecting any other channel. The 1771-NIV1 is supplied with eight voltage input channels which are rated for ±10V and the module consumes 1.2A from the I/O backplane.



 



The voltage inputs for the 1771-NIV1 are made for a ±10.5V (±42mA, with a resistor) operating range, a 330µV/bit (15 bits with a sign bit) resolution and an impedance greater than 10megaohm. A maximum time of 9s is required by the module to detect an open input, and the rating for overvoltage protection is 140V AC RMS (continuous). The bandwidth range for the 1771-NIV1’s input signals is 9 Hz and the time required for updating per module is a maximum time of 25s. ±35 ppm/°C is the specification for gain drift whereas ±30µV/°C is the specification for offset drift. Specifications for under-voltage and overvoltage are -10.4V DC and +10.4V DC respectively. Specifications for calibration values are 0.0000V/10.0000V. The 1771-NIV1’s normal mode ratings for 50 /60 Hz are 50 dB / 60 dB and the typical value for common mode is 150 dB.



 



The manufacturer recommends using the 1771-NIV1 with the RTP-4 and also recommends removing I/O chassis power prior to module installation or servicing. The power dissipation specification for the 1771-N1V1 is 6W. The module performs optimally in industrial environments with temperatures ranging from 0 to 60°C (32 to 140°F) at 5 - 95% humidity (without condensation).



Technical Description of 1771-NIV1

Allen Bradley PLC 5 N-Series Analog I/O Module, 8 Inputs, 0 Outputs, 1.5 Amperes Backplane Current, BDC or Natural Binary Data Format

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $1223cartAdd to Cart

Our highly skilled technicians can repair your 1771-NIV1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $1223cartAdd to Cart

Our highly skilled technicians can repair your 1771-NIV1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1771-NIV1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-NIV1 Ser A
1771-NIV1/A, Series A, Rev A Request Quote
1771-NIV1 Ser B
1771-NIV1/B, Series B, Rev B Request Quote
1771-NIV1 Ser C
1771-NIV1/C, Series C, Rev C Request Quote

Common misspellings:
  • l771-NIV1
  • 177l-NIV1
  • 1771-NIVl
  • 1771NIV1
PDF