Product image is representative; revision or series may vary. Contact us to request a specific version.
The Allen-Bradley 1771-OBDK output module is a PLC 5 series digital DC output module. It has 16 output channels and its voltage category is 10 to 60 Volts DC. The 1771-OBDK digital DC output module?s operating voltage range is also 10 to 60 Volts DC. This digital output module comes with a conformal coating that can protect it from moisture or corrosive chemicals in its environment. The 1771-OBDK digital DC output module is safe to use in all non-hazardous industrial environments, and it is safe to use in Pollution Degree 2 rated hazardous industrial environments.
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
Repairs and exchanges are available for all automation products.
Drop shipping, blind shipping, and account shipping with no extra fees.
| Manufacturer | Allen Bradley |
|---|---|
| Category | PLCs |
| Product Line | PLC 5 |
| Part Number | 1771-OBDK |
| Weight | 0.94 lbs (0.43 kg) |
| Module Type | Digital DC Output Module |
| Number of Outputs | 16 Outputs |
| Voltage Category | 10-60 Volts DC, Source |
| DC Operating Voltage | 10-60 Volts |
| Backplane Current | 400 Miliamperes |
| Max Continuous Current Per Output | 2 Amperes |
| Max Continuous Current Per Module | 8 Amperes |
| Wiring Arm | 1771-WH |
| Coating | Conformal Coat |
| Data Format | BDC or Natural Binary |
| Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
| Typical DC Signal Delay (Off) | 50 ms |
| Mounting | Rack Mountable |
The Allen Bradley 1771-OBDK is a PLC 5 Digital AC Output Module with a conformal coating and a minimal load current of 2.5 mA. Its maximum surge current is 4 A per output for 10 milliseconds, which is repeatable every 2 seconds. It has a maximum on state voltage drop of 1.5 Volts DC and a maximum off state leakage current of .5 mA. With a maximum power dissipation of 15.6 Watts and a maximum thermal dissipation of 53.3 BTU/hour, the 1771-OBDK is intended for use in a pollution level industry Environment 2 in Excessive Category II Applications.
Connecting of disconnecting cables or inserting or discharging a power supply while power is on may cause an electrical arc to occur, which can cause an explosion and/or extensive damage to equipment.
The 1771-OBDK module is a modular component of a 1771 I/O system that requires a properly installed system chassis. Permanent damage to the module can occur in frequent overload or short circuit conditions. To prevent module damage, use an optional 1771-WHF or 1771-WHFB field protection cable instead of the 1771-WH wiring arm that comes with this unit and limit the dissipation of adjacent slot power to 10 Watts maximum.
| Revision Part # | Also known as | |
|---|---|---|
| 1771-OBDK Ser A | 1771-OBDK/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
Allen Bradley PLC 5 Digital DC Output Module, 16 Outputs, 10-60 Volts DC Operating Voltage, 400 Miliamperes Backplane Current, Conformal Coat