DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Description: The Allen-Bradley 1771-ODD output module is a 16-channel AC output module that is manufactured as part of the PLC 5 series of controller components. Its AC operating voltage range is between 85 and 138 Volts AC and its voltage category rating is 120 Volts AC. The 1771-ODD 16-channel AC output module?s current ratings include 420 milliamps of backplane current, 2 Amps of maximum continuous current per output channel, and 8 Amps of maximum continuous current per module. The 1771-ODD 16-channel AC output module is protected by surge suppression circuitry and it can support fuses.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1771-ODD. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-ODD |
Module Type | Digital AC Output Module |
Number of Outputs | 16 Outputs |
Voltage Category | 120 Volts AC |
AC Operating Voltage | 85-138 Volts |
Backplane Current | 420 Miliamperes |
Max Continuous Current Per Output | 2 Amperes |
Max Current Per Module | 8 Amperes |
Wiring Arm | 1771-WN |
Model Status | Earlier Model |
Data Format | BDC or Natural Binary |
Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
Typical DC Signal Delay (Off) | 50 ms |
Wiring Arm | 1771-WH |
Mounting | Rack Mountable |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-ODD |
Module Type | Digital AC Output Module |
Number of Outputs | 16 Outputs |
Voltage Category | 120 Volts AC |
AC Operating Voltage | 85-138 Volts |
Backplane Current | 420 Miliamperes |
Max Continuous Current Per Output | 2 Amperes |
Max Current Per Module | 8 Amperes |
Wiring Arm | 1771-WN |
Model Status | Earlier Model |
Data Format | BDC or Natural Binary |
Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
Typical DC Signal Delay (Off) | 50 ms |
Wiring Arm | 1771-WH |
Mounting | Rack Mountable |
The Allen-Bradley 1771-ODD is a PLC 5 Digital AC Output Module. It is an earlier model of the 1771-OD module with the same specifications. It includes the necessary isolated circuitry to control the on/off status of various user devices such as solenoids and transformers. It is directly controlled by the corresponding bits state in the PLC data table. The 1771-ODD has 16 image bits per module and supports ½, 1, and 2-slot addressing. It contains surge suppression circuitry to suppress high-voltage transients from the AC line.
The 1771-ODD Series A module has 16 isolated outputs with 120V AC voltage category. It has an operating voltage range of 85 – 138V AC and a backplane current load of 420mA. It has maximum continuous current per output of 2A and maximum current per module of 8A. It has a maximum signal delay of 10.6ms from Off to On-state and vice versa. It has a maximum power dissipation of 14.2W and maximum thermal dissipation of 48.5 BTU/hr. It comes with a 1771-WN wiring arm to replace modules, eliminating the need to disconnect wiring. The 1771-ODD is mounted in a 1771 I/O chassis containing a PLC processor with keying bands for correct installation between pins 4-6 for the lower connector and pins 30-32 for the upper connector.
The 1771-ODD module has 32 status indicators at the front of the module. Sixteen indicators on the left show the status of each output and 16 indicators on the right indicate a blown-fuse condition. It also includes optical coupling and filtering for reducing the signal noise.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $496 | ![]() |
Our highly skilled technicians can repair your 1771-ODD. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-ODD such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-ODD Ser A
|
1771-ODD/A, Series A, Rev A | Request Quote |
1771-ODD Ser B
|
1771-ODD/B, Series B, Rev B | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-ODD |
Module Type | Digital AC Output Module |
Number of Outputs | 16 Outputs |
Voltage Category | 120 Volts AC |
AC Operating Voltage | 85-138 Volts |
Backplane Current | 420 Miliamperes |
Max Continuous Current Per Output | 2 Amperes |
Max Current Per Module | 8 Amperes |
Wiring Arm | 1771-WN |
Model Status | Earlier Model |
Data Format | BDC or Natural Binary |
Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
Typical DC Signal Delay (Off) | 50 ms |
Wiring Arm | 1771-WH |
Mounting | Rack Mountable |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-ODD |
Module Type | Digital AC Output Module |
Number of Outputs | 16 Outputs |
Voltage Category | 120 Volts AC |
AC Operating Voltage | 85-138 Volts |
Backplane Current | 420 Miliamperes |
Max Continuous Current Per Output | 2 Amperes |
Max Current Per Module | 8 Amperes |
Wiring Arm | 1771-WN |
Model Status | Earlier Model |
Data Format | BDC or Natural Binary |
Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
Typical DC Signal Delay (Off) | 50 ms |
Wiring Arm | 1771-WH |
Mounting | Rack Mountable |
The Allen-Bradley 1771-ODD is a PLC 5 Digital AC Output Module. It is an earlier model of the 1771-OD module with the same specifications. It includes the necessary isolated circuitry to control the on/off status of various user devices such as solenoids and transformers. It is directly controlled by the corresponding bits state in the PLC data table. The 1771-ODD has 16 image bits per module and supports ½, 1, and 2-slot addressing. It contains surge suppression circuitry to suppress high-voltage transients from the AC line.
The 1771-ODD Series A module has 16 isolated outputs with 120V AC voltage category. It has an operating voltage range of 85 – 138V AC and a backplane current load of 420mA. It has maximum continuous current per output of 2A and maximum current per module of 8A. It has a maximum signal delay of 10.6ms from Off to On-state and vice versa. It has a maximum power dissipation of 14.2W and maximum thermal dissipation of 48.5 BTU/hr. It comes with a 1771-WN wiring arm to replace modules, eliminating the need to disconnect wiring. The 1771-ODD is mounted in a 1771 I/O chassis containing a PLC processor with keying bands for correct installation between pins 4-6 for the lower connector and pins 30-32 for the upper connector.
The 1771-ODD module has 32 status indicators at the front of the module. Sixteen indicators on the left show the status of each output and 16 indicators on the right indicate a blown-fuse condition. It also includes optical coupling and filtering for reducing the signal noise.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $496 | ![]() |
Our highly skilled technicians can repair your 1771-ODD. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $496 | ![]() |
Our highly skilled technicians can repair your 1771-ODD. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-ODD such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-ODD Ser A
|
1771-ODD/A, Series A, Rev A | Request Quote |
1771-ODD Ser B
|
1771-ODD/B, Series B, Rev B | Request Quote |