Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PLC 5 1771-OEM1

Product image is representative; revision or series may vary. Contact us to request a specific version.

1771-OEM1

|
Need a Specific Revision?

The 1771-OEM1 module is an AC output module that has been manufactured and designed by Allen-Bradley.Rockwell Automation and included in the 1771 series of I/O modules.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1771-OEM1

ManufacturerAllen Bradley
CategoryPLCs
Product LinePLC 5
Part Number1771-OEM1
Weight1.94 lbs (0.88 kg)
TypeAC Output Module
Outputs8
Output current rating2 A
Surge current20 A for 100 ms
Voltage220 to 240 Volts AC
Power dissipation13,2 Watts maximum - 1,2 Watts minimum
FuseYes
Conductors14 gauge stranded and 1,2 insulation
Status indicatorsYes, for each output and fuse
CompatibilityAllen-Bradley motor starter size 5
Chassis1771-A1B to A4B or later
Request a Repair

The 1771-OEM1 AC output module has been manufactured by Allen-Bradley/Rockwell Automation as part of the 1771 product line of I/O modules. This specific output module can be used with any Allen-Bradley/Rockwell Automation motor starter with a size of 5 and whose supply voltage does not drop below 148 Volts. The voltage intended for this module is 220 to 240 Volts AC with a frequency of 50 to 60 Hertz and a tolerance of +/- 10 percent. The Allen-Bradley/Rockwell Automation 1771-OEM1 AC output module comes with 8 outputs and each one of them has a status indicator that shows its current activity. This module has 1 green front indicator, 16 red status indicators, and 1 red fuse blown indicator. This module performs diagnostics in a handshaking mode when it is first powered up. Once the diagnostics have been completed, the main indicator lights up. If a fault has occurred, the main indicator will not light up. Faults related to each output will be shown by their respective indicators.

The Allen-Bradley/Rockwell Automation 1771-OEM1 AC output module has an output current rating of 2 Amps and a surge current rating of 20 Amps for 100 milliseconds that can repeat within 10 seconds. It also has a power dissipation rating of 13.2 Watts maximum and of 1.2 Watts minimum. The conductors of the module are 14 gauge stranded and 1.2 insulation rated conductors. The recommended operating conditions for the Allen-Bradley/Rockwell Automation 1771-OEM1 AC output module are an operational temperature range of 0 to 60 degrees Celsius and a relative humidity of 5 to 95 percent, with non-condensing humidity. This module has been designed to operate in indoor environments only.