DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1771-ON. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-ON |
Module Type | Digital AC Output Module |
Number of Outputs | 8 Outputs |
Voltage Category | 24 Volts AC |
AC Operating Voltage | 20-30 Volts |
Backplane Current | 225 Miliamperes |
Max Continuous Current Per Output | 1.5 Amperes |
Max Current Per Module | 6 Amperes |
Wiring Arm | 1771-WA |
Model Status | Earlier Model |
Coating | Conformal Coat |
Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
Typical DC Signal Delay (Off) | 50 ms |
Wiring Arm | 1771-WH |
Mounting | Rack Mountable |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-ON |
Module Type | Digital AC Output Module |
Number of Outputs | 8 Outputs |
Voltage Category | 24 Volts AC |
AC Operating Voltage | 20-30 Volts |
Backplane Current | 225 Miliamperes |
Max Continuous Current Per Output | 1.5 Amperes |
Max Current Per Module | 6 Amperes |
Wiring Arm | 1771-WA |
Model Status | Earlier Model |
Coating | Conformal Coat |
Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
Typical DC Signal Delay (Off) | 50 ms |
Wiring Arm | 1771-WH |
Mounting | Rack Mountable |
The Allen-Bradley 1771-ON PLC 5 Digital Output Module has 8 fused outputs fitted onto any slot of the 1771 I/O chassis, and it is keyed into the backplane through a connection between the connection bans between pins 4 and 6 and pins 12 and 14. Its operational voltage ranges between 20 and 30V AC at 47 – 63 Hz, with 24V AC nominal voltage at 50-60Hz, and the maximum output current on each output is 1.5A, with a total current load which must not exceed 6A for the module. The 1771-ON has a 4A (10msec) current surge for both the outputs and the module, and the minimum load required for the module to stay ON is 100mA per output at 24V AC (60Hz).
The 1771-ON module has a maximum voltage loss of 2V DC at 100mA in its ON-state, and the maximum leakage current in the ON-state is 4mA per output at 30V AC. It has a maximum output signal delay time of 1ms for ON and 8.3ms for OFF at 60Hz, and it dissipates 45.1 BTU/hr heat when operational. The 1771-ON requires a backplane current of 225mA at 5V DC (+ 5%) and provides a voltage isolation that meets UL and CSA standards. Each output is fused with a 250V, 2A Normal Blow fuse, and it comes with a field wiring arm with a wiring screw torque of 7 x 9 inch-pounds. The 1771-ON module is CSA, UL, and CE-certified and it can function without de-rating at a temperature range between 32 and 140 oF, at 5-95% non-condensing relative humidity.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $156 | ![]() |
Our highly skilled technicians can repair your 1771-ON. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-ON such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-ON Ser A
|
1771-ON/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-ON |
Module Type | Digital AC Output Module |
Number of Outputs | 8 Outputs |
Voltage Category | 24 Volts AC |
AC Operating Voltage | 20-30 Volts |
Backplane Current | 225 Miliamperes |
Max Continuous Current Per Output | 1.5 Amperes |
Max Current Per Module | 6 Amperes |
Wiring Arm | 1771-WA |
Model Status | Earlier Model |
Coating | Conformal Coat |
Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
Typical DC Signal Delay (Off) | 50 ms |
Wiring Arm | 1771-WH |
Mounting | Rack Mountable |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-ON |
Module Type | Digital AC Output Module |
Number of Outputs | 8 Outputs |
Voltage Category | 24 Volts AC |
AC Operating Voltage | 20-30 Volts |
Backplane Current | 225 Miliamperes |
Max Continuous Current Per Output | 1.5 Amperes |
Max Current Per Module | 6 Amperes |
Wiring Arm | 1771-WA |
Model Status | Earlier Model |
Coating | Conformal Coat |
Typical AC Signal Delay (Off) | 45 (+/- 15) ms |
Typical DC Signal Delay (Off) | 50 ms |
Wiring Arm | 1771-WH |
Mounting | Rack Mountable |
The Allen-Bradley 1771-ON PLC 5 Digital Output Module has 8 fused outputs fitted onto any slot of the 1771 I/O chassis, and it is keyed into the backplane through a connection between the connection bans between pins 4 and 6 and pins 12 and 14. Its operational voltage ranges between 20 and 30V AC at 47 – 63 Hz, with 24V AC nominal voltage at 50-60Hz, and the maximum output current on each output is 1.5A, with a total current load which must not exceed 6A for the module. The 1771-ON has a 4A (10msec) current surge for both the outputs and the module, and the minimum load required for the module to stay ON is 100mA per output at 24V AC (60Hz).
The 1771-ON module has a maximum voltage loss of 2V DC at 100mA in its ON-state, and the maximum leakage current in the ON-state is 4mA per output at 30V AC. It has a maximum output signal delay time of 1ms for ON and 8.3ms for OFF at 60Hz, and it dissipates 45.1 BTU/hr heat when operational. The 1771-ON requires a backplane current of 225mA at 5V DC (+ 5%) and provides a voltage isolation that meets UL and CSA standards. Each output is fused with a 250V, 2A Normal Blow fuse, and it comes with a field wiring arm with a wiring screw torque of 7 x 9 inch-pounds. The 1771-ON module is CSA, UL, and CE-certified and it can function without de-rating at a temperature range between 32 and 140 oF, at 5-95% non-condensing relative humidity.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $156 | ![]() |
Our highly skilled technicians can repair your 1771-ON. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $156 | ![]() |
Our highly skilled technicians can repair your 1771-ON. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-ON such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-ON Ser A
|
1771-ON/A, Series A, Rev A | Request Quote |