1771-OWK | Allen Bradley PLC PLC 5

1771-OWK

Rated 4.6 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1771-OWK

Revisions: Ser A 
Description: Allen Bradley PLC 5 Digital Contact Output Module, 8 (4 Sets of 2) Ouputs, 24-138 Volts AC Operating Voltage, 24-235 Volts DC Operating Voltage, Conformal Coat
Available Now
Request a quote for 1771-OWK

Description: Allen Bradley PLC 5 Digital Contact Output Module, 8 (4 Sets of 2) Ouputs, 24-138 Volts AC Operating Voltage, 24-235 Volts DC Operating Voltage, Conformal Coat

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1771-OWK.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 16 reviews

    Technical Specifications for 1771-OWK

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-OWK
Module TypeDigital Contact Output Module
Number of Outputs8 (4 Sets of 2) Ouputs
Contact Output Type8 Selectable
AC Operating Voltage24-138 Volts
DC Operating Voltage24-235 Volts
Backplane Current700 Miliamperes
ListingThese specifications were compiled by DO Supply Inc (D O Supply).
Max Continuous Current Per Module0.25 Amperes (at 120 Volts AC/DC) or 1 Ampere (at 30 Volts AC/DC) (30 Watts Max)
Max Continuous Current Per ModuleN/A
Wiring Arm1771-WD
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-OWK
Module TypeDigital Contact Output Module
Number of Outputs8 (4 Sets of 2) Ouputs
Contact Output Type8 Selectable
AC Operating Voltage24-138 Volts
DC Operating Voltage24-235 Volts
Backplane Current700 Miliamperes
Max Continuous Current Per Module0.25 Amperes (at 120 Volts AC/DC) or 1 Ampere (at 30 Volts AC/DC) (30 Watts Max)
Max Continuous Current Per ModuleN/A
Wiring Arm1771-WD
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
s

About 1771-OWK

The Allen-Bradley 1771-OWK is a Selectable Contact Output Module that features conformal coating. This model is the best alternative to the standard 1771-OW when operating in environmental conditions where it requires protection against humidity and contaminants. The 1771-OWK has a total of eight outputs per module, grouped in 4 sets of 2 with each set having its own common. The output relays have open contacts, ensuring no leakage currents occur in critical applications. Each output is electrically-isolated with a selectable-configuration.

The 1771-OWK draws a maximum current of 700mA to energize all coils and power the module. It has an operating voltage ranging from 24-138V AC§ (of resistive loads), and from 24-25V DC. Per output, it has a maximum of 0.25 A at 120V AC/DC or 1A at 30V AC/DC (30 W) continuous current. The 1771-OWK has a typical operate/release time of 5ms (±1ms), and a maximum switching frequency of 10 Hz with maximum bounce time of 1ms. 

All eight selectable contact outputs of the 1771-OWK are factory pre-set at normally-open operation. These jumpers can be reset to either normally–open or normally–closed (N.O. or N.C.). Connections to the module are made via the field wiring arm with category no. 1771–WD. To set the I/O chassis to accept the 1771-OWK, place the keying bands between pins 6 and 8, and between pins 16 and 18.



Repair Services for 1771-OWK

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1771-OWK. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1771-OWK

Please refer to the manual for more information about the 1771-OWK such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-OWK Ser A
1771-OWK/A, Series A, Rev A Request Quote
Common misspellings:
  • l771-OWK
  • 177l-OWK
  • 1771-0WK
  • 1771OWK

Dimensions For 1771-OWK

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1771-OWK

Resolutions For 1771-OWK

About

Technical Specifications for 1771-OWK

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-OWK
Module TypeDigital Contact Output Module
Number of Outputs8 (4 Sets of 2) Ouputs
Contact Output Type8 Selectable
AC Operating Voltage24-138 Volts
DC Operating Voltage24-235 Volts
Backplane Current700 Miliamperes
Max Continuous Current Per Module0.25 Amperes (at 120 Volts AC/DC) or 1 Ampere (at 30 Volts AC/DC) (30 Watts Max)
Max Continuous Current Per ModuleN/A
Wiring Arm1771-WD
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-OWK
Module TypeDigital Contact Output Module
Number of Outputs8 (4 Sets of 2) Ouputs
Contact Output Type8 Selectable
AC Operating Voltage24-138 Volts
DC Operating Voltage24-235 Volts
Backplane Current700 Miliamperes
Max Continuous Current Per Module0.25 Amperes (at 120 Volts AC/DC) or 1 Ampere (at 30 Volts AC/DC) (30 Watts Max)
Max Continuous Current Per ModuleN/A
Wiring Arm1771-WD
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable

About 1771-OWK

The Allen-Bradley 1771-OWK is a Selectable Contact Output Module that features conformal coating. This model is the best alternative to the standard 1771-OW when operating in environmental conditions where it requires protection against humidity and contaminants. The 1771-OWK has a total of eight outputs per module, grouped in 4 sets of 2 with each set having its own common. The output relays have open contacts, ensuring no leakage currents occur in critical applications. Each output is electrically-isolated with a selectable-configuration.

The 1771-OWK draws a maximum current of 700mA to energize all coils and power the module. It has an operating voltage ranging from 24-138V AC§ (of resistive loads), and from 24-25V DC. Per output, it has a maximum of 0.25 A at 120V AC/DC or 1A at 30V AC/DC (30 W) continuous current. The 1771-OWK has a typical operate/release time of 5ms (±1ms), and a maximum switching frequency of 10 Hz with maximum bounce time of 1ms. 

All eight selectable contact outputs of the 1771-OWK are factory pre-set at normally-open operation. These jumpers can be reset to either normally–open or normally–closed (N.O. or N.C.). Connections to the module are made via the field wiring arm with category no. 1771–WD. To set the I/O chassis to accept the 1771-OWK, place the keying bands between pins 6 and 8, and between pins 16 and 18.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1771-OWK. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1771-OWK. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1771-OWK such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-OWK Ser A
1771-OWK/A, Series A, Rev A Request Quote

Common misspellings:
  • l771-OWK
  • 177l-OWK
  • 1771-0WK
  • 1771OWK
PDF