1771-OWN - In Stock | Allen Bradley PLC PLC 5

1771-OWN

Rated 4.5 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1771-OWN

Revisions: Ser A 
Description: Allen Bradley PLC 5 Digital Contact Output Module, 32 (4 sets of 8) Outputs, 24-138 Volts AC Operating Voltage, 24-125 Volts DC Operating Voltage
In Stock Ships Today
Request a quote for 1771-OWN

Description: Allen Bradley PLC 5 Digital Contact Output Module, 32 (4 sets of 8) Outputs, 24-138 Volts AC Operating Voltage, 24-125 Volts DC Operating Voltage

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1771-OWN.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 11 reviews

    Technical Specifications for 1771-OWN

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-OWN
Module TypeDigital Contact Output Module
Number of Outputs32 (4 sets of 8) Outputs
Contact Output Type32 Selectable
AC Operating Voltage24-138 Volts
DC Operating Voltage24-125 Volts
Backplane Current2500 Miliamperes
Max Continuous Current Per Module0.25 Amperes (at 120 Volts AC/DC) or 1 Ampere (at 30 Volts AC/DC) (30 Watts Max)
Max Continuous Current Per Module12 Amperes (at 45 C)
Wiring Arm1771-WN
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-OWN
Module TypeDigital Contact Output Module
Number of Outputs32 (4 sets of 8) Outputs
Contact Output Type32 Selectable
AC Operating Voltage24-138 Volts
DC Operating Voltage24-125 Volts
Backplane Current2500 Miliamperes
Max Continuous Current Per Module0.25 Amperes (at 120 Volts AC/DC) or 1 Ampere (at 30 Volts AC/DC) (30 Watts Max)
Max Continuous Current Per Module12 Amperes (at 45 C)
Wiring Arm1771-WN
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
s

About 1771-OWN

The Allen-Bradley 1771-OWN is a part of the 1771 Digital I/O Relay Contact Output Modules that feature open contacts on output relays. This ensures that no leakage currents will happen while critical applications are in operation. The module has a total of 32 outputs with selectable configurations. This means that each output can be configured to be ON or OFF when the output module or the control system loses local power. On its front plate are 32 status indicators signaling if the corresponding outputs are energized, plus one blown fuse indicator.



The 1771-OWN can be used to drive a 120V AC input module and to indicate the status of turning on a motor starter. It is compatible with the 1771-IA, -IA2, and -IAD input modules. Attempting this connection will require a 15K, 2W resistor to be installed between the output and the common. Inputs and outputs configured together are not isolated.



The 32 outputs of the 1771-OWN are arranged in 4 groups of 8 outputs each. The module has a voltage range of 24-138V AC RMS; 24-125V DC. It is powered via the chassis backplane from the power supply and requires 2.5A maximum; 1.8A nominal backplane current load. The module can be used with the 1771-AM1 and -AM2; and the 1771-A1B through the 1771-A4B I/O chassis.



Repair Services for 1771-OWN

Type Lead Time Price Action
Repair Service 2-4 weeks $2216cartAdd to Cart

Our highly skilled technicians can repair your 1771-OWN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1771-OWN

Please refer to the manual for more information about the 1771-OWN such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-OWN Ser A
1771-OWN/A, Series A, Rev A Request Quote
Common misspellings:
  • l771-OWN
  • 177l-OWN
  • 1771-0WN
  • 1771OWN

Dimensions For 1771-OWN

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1771-OWN

Resolutions For 1771-OWN

About

Technical Specifications for 1771-OWN

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-OWN
Module TypeDigital Contact Output Module
Number of Outputs32 (4 sets of 8) Outputs
Contact Output Type32 Selectable
AC Operating Voltage24-138 Volts
DC Operating Voltage24-125 Volts
Backplane Current2500 Miliamperes
Max Continuous Current Per Module0.25 Amperes (at 120 Volts AC/DC) or 1 Ampere (at 30 Volts AC/DC) (30 Watts Max)
Max Continuous Current Per Module12 Amperes (at 45 C)
Wiring Arm1771-WN
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-OWN
Module TypeDigital Contact Output Module
Number of Outputs32 (4 sets of 8) Outputs
Contact Output Type32 Selectable
AC Operating Voltage24-138 Volts
DC Operating Voltage24-125 Volts
Backplane Current2500 Miliamperes
Max Continuous Current Per Module0.25 Amperes (at 120 Volts AC/DC) or 1 Ampere (at 30 Volts AC/DC) (30 Watts Max)
Max Continuous Current Per Module12 Amperes (at 45 C)
Wiring Arm1771-WN
CoatingConformal Coat
Typical AC Signal Delay (Off)45 (+/- 15) ms
Typical DC Signal Delay (Off)50 ms
Wiring Arm1771-WH
MountingRack Mountable

About 1771-OWN

The Allen-Bradley 1771-OWN is a part of the 1771 Digital I/O Relay Contact Output Modules that feature open contacts on output relays. This ensures that no leakage currents will happen while critical applications are in operation. The module has a total of 32 outputs with selectable configurations. This means that each output can be configured to be ON or OFF when the output module or the control system loses local power. On its front plate are 32 status indicators signaling if the corresponding outputs are energized, plus one blown fuse indicator.



The 1771-OWN can be used to drive a 120V AC input module and to indicate the status of turning on a motor starter. It is compatible with the 1771-IA, -IA2, and -IAD input modules. Attempting this connection will require a 15K, 2W resistor to be installed between the output and the common. Inputs and outputs configured together are not isolated.



The 32 outputs of the 1771-OWN are arranged in 4 groups of 8 outputs each. The module has a voltage range of 24-138V AC RMS; 24-125V DC. It is powered via the chassis backplane from the power supply and requires 2.5A maximum; 1.8A nominal backplane current load. The module can be used with the 1771-AM1 and -AM2; and the 1771-A1B through the 1771-A4B I/O chassis.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $2216cartAdd to Cart

Our highly skilled technicians can repair your 1771-OWN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $2216cartAdd to Cart

Our highly skilled technicians can repair your 1771-OWN. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1771-OWN such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-OWN Ser A
1771-OWN/A, Series A, Rev A Request Quote

Common misspellings:
  • l771-OWN
  • 177l-OWN
  • 1771-0WN
  • 1771OWN
PDF