DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Description: The 1771-P4S1 power supply module is an Allen-Bradley/Rockwell Automation power supply from the PLC 5 product line. It is an AC power supply module with a nominal voltage rating of 120 Volts AC and an operating voltage range of 85 to 120 Volts AC. The frequency rating of the 1771-P4S1 power supply module is 47 to 63 Hertz at the rated operating voltage. This power supply provides power to the backplane of the PLC 5 controller system that it is part of. The 1771-P4S1 power supply module is an open module that does not have an enclosure for protection.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1771-P4S1. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-P4S1 |
Module Type | Power Supply |
Nom Input Voltage | 100 Volts AC |
Input Voltage Range | 85-120 Volts AC |
Max Real Input Power | 56 Watts |
Max Apparent Input Power | 89 VA |
Max Xformer Load | 140 VA |
User Output Current | N/A |
Backplane Output Current | 8 Amperes (at 5 Volts DC) |
Frequency | 47-63 Hertz |
Fuse | 1.5 Amperes, 250 Volts, slow-blow |
Cabling | 1771-CT |
Paralleled | #NAME? |
Location | 1771 Chassis, 1 Slot |
Dimensions | 1 Chassis Slot |
UPC | 10662468206072 |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-P4S1 |
Module Type | Power Supply |
Nom Input Voltage | 100 Volts AC |
Input Voltage Range | 85-120 Volts AC |
Max Real Input Power | 56 Watts |
Max Apparent Input Power | 89 VA |
Max Xformer Load | 140 VA |
User Output Current | N/A |
Backplane Output Current | 8 Amperes (at 5 Volts DC) |
Frequency | 47-63 Hertz |
Fuse | 1.5 Amperes, 250 Volts, slow-blow |
Cabling | 1771-CT |
Paralleled | #NAME? |
Location | 1771 Chassis, 1 Slot |
Dimensions | 1 Chassis Slot |
UPC | 10662468206072 |
The 1771-P4S1 Power Supply Module is an AC power module by Allen-Bradley which provides power to the backplane and is installed in a single slot of the 1771 I/O chassis. It has a nominal input voltage of 120V AC and an input current of 0.88 Ampere. Its input voltage ranges between 85 and 120V AC at 47-63Hz, and the module has a real input power of 56W, and an apparent power of 89VA. It has an output rating of 5.06V DC (+-3/6% of the total output) voltage and a maximum output current of 8A at 5V DC. It dissipates 4W heat at 2A, and 17W heat at 8A and the maximum power dissipated by the adjacent slot is 10W. The 1771-P4S1 provides tested 2160V DC isolation for 1 seconds, and a branch circuit protection for a current no greater than 15A.
It has a Terminal Block Screw torque of 0.5Nm and is fused with a 1.5A 125V slow blow fuse, Bussman MDX 1.5, Littel fuse 31301.5, and IEC 127 Type T (blue) fuse. The 1771-P4S1 has a maximum power loss delay time of 13.6ms (-+3.6), and uses a copper conductor with 14 AWG size rated at 60 0C and with an insulation thickness of 1.2mm (max). The module has an IEC tested and rated working temperature range of 0060 0C without de-rating around a relative humidity range of 5-95% without condensation. The 1771-P4S1 weighs approximately 1.04Kg (2.3lb) and is designed with an open-style enclosure. A recommended 140VA load transformer optional transformer may be used alongside it, and the module is UL and CSA-certified.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $285 | ![]() |
Our highly skilled technicians can repair your 1771-P4S1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-P4S1 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-P4S1 Ser A
|
1771-P4S1/A, Series A, Rev A | Request Quote |
1771-P4S1 Ser B
|
1771-P4S1/B, Series B, Rev B | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-P4S1 |
Module Type | Power Supply |
Nom Input Voltage | 100 Volts AC |
Input Voltage Range | 85-120 Volts AC |
Max Real Input Power | 56 Watts |
Max Apparent Input Power | 89 VA |
Max Xformer Load | 140 VA |
User Output Current | N/A |
Backplane Output Current | 8 Amperes (at 5 Volts DC) |
Frequency | 47-63 Hertz |
Fuse | 1.5 Amperes, 250 Volts, slow-blow |
Cabling | 1771-CT |
Paralleled | #NAME? |
Location | 1771 Chassis, 1 Slot |
Dimensions | 1 Chassis Slot |
UPC | 10662468206072 |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-P4S1 |
Module Type | Power Supply |
Nom Input Voltage | 100 Volts AC |
Input Voltage Range | 85-120 Volts AC |
Max Real Input Power | 56 Watts |
Max Apparent Input Power | 89 VA |
Max Xformer Load | 140 VA |
User Output Current | N/A |
Backplane Output Current | 8 Amperes (at 5 Volts DC) |
Frequency | 47-63 Hertz |
Fuse | 1.5 Amperes, 250 Volts, slow-blow |
Cabling | 1771-CT |
Paralleled | #NAME? |
Location | 1771 Chassis, 1 Slot |
Dimensions | 1 Chassis Slot |
UPC | 10662468206072 |
The 1771-P4S1 Power Supply Module is an AC power module by Allen-Bradley which provides power to the backplane and is installed in a single slot of the 1771 I/O chassis. It has a nominal input voltage of 120V AC and an input current of 0.88 Ampere. Its input voltage ranges between 85 and 120V AC at 47-63Hz, and the module has a real input power of 56W, and an apparent power of 89VA. It has an output rating of 5.06V DC (+-3/6% of the total output) voltage and a maximum output current of 8A at 5V DC. It dissipates 4W heat at 2A, and 17W heat at 8A and the maximum power dissipated by the adjacent slot is 10W. The 1771-P4S1 provides tested 2160V DC isolation for 1 seconds, and a branch circuit protection for a current no greater than 15A.
It has a Terminal Block Screw torque of 0.5Nm and is fused with a 1.5A 125V slow blow fuse, Bussman MDX 1.5, Littel fuse 31301.5, and IEC 127 Type T (blue) fuse. The 1771-P4S1 has a maximum power loss delay time of 13.6ms (-+3.6), and uses a copper conductor with 14 AWG size rated at 60 0C and with an insulation thickness of 1.2mm (max). The module has an IEC tested and rated working temperature range of 0060 0C without de-rating around a relative humidity range of 5-95% without condensation. The 1771-P4S1 weighs approximately 1.04Kg (2.3lb) and is designed with an open-style enclosure. A recommended 140VA load transformer optional transformer may be used alongside it, and the module is UL and CSA-certified.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $285 | ![]() |
Our highly skilled technicians can repair your 1771-P4S1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $285 | ![]() |
Our highly skilled technicians can repair your 1771-P4S1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-P4S1 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-P4S1 Ser A
|
1771-P4S1/A, Series A, Rev A | Request Quote |
1771-P4S1 Ser B
|
1771-P4S1/B, Series B, Rev B | Request Quote |