DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1771-PSCC. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-PSCC |
Module Type | I/O Chasis |
Number of Module I/O Slots | 4 Slots |
Mount Type | Back Panel |
Dimensions | 8.00 x 7.1 x 12.23 in (203 x 180 x 311 mm) |
Weight | 4.1 lbs (1.9 kg) |
Model Status | Earlier Model |
User Output Current | 8 Amps (at 5 V dc), 2 Amps (at +/- 15 V dc), 2.5 Amps (at 24 V dc) |
Backplane Output Current | 16 Amperes (at 5 Volts DC) |
Frequency | 47-63 Hertz |
Fuse | 3 Amperes, 250 Volts, Normal-Blow |
Cabling | 1771-PSCC Remote 5.5 ft |
Paralleled | N/A |
Location | Stand-Alone |
Dimensions | 4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm) |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-PSCC |
Module Type | I/O Chasis |
Number of Module I/O Slots | 4 Slots |
Mount Type | Back Panel |
Dimensions | 8.00 x 7.1 x 12.23 in (203 x 180 x 311 mm) |
Weight | 4.1 lbs (1.9 kg) |
Model Status | Earlier Model |
User Output Current | 8 Amps (at 5 V dc), 2 Amps (at +/- 15 V dc), 2.5 Amps (at 24 V dc) |
Backplane Output Current | 16 Amperes (at 5 Volts DC) |
Frequency | 47-63 Hertz |
Fuse | 3 Amperes, 250 Volts, Normal-Blow |
Cabling | 1771-PSCC Remote 5.5 ft |
Paralleled | N/A |
Location | Stand-Alone |
Dimensions | 4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm) |
The Allen-Bradley 1771-PSCC power cable is a power cable used in PLC-5 systems. It is used for connecting Allen-Bradley 1771 I/O racks with 1771-PS7 power supplies or with 1771-PSC power supply chassis. The package containing the 1771-PSCC power cable contains the cable itself, and a plastic bag with 2 cable ties and 2 screws. One cable tie and screw should be used for the provision of strain relief for the weight of power cable on the rack backplane connector. The other cable tie and screw should be used to secure the power cable at the appropriate location in the panel.
The weight of the Allen-Bradley 1771-PSCC power cable is 1 pound. The 1771-PS7 power supply can be used to provide power to 1771 I/O chassis and to IMC 120, 120AR, 121, and 12 motion controller modules. For the 1771 I/O chassis, it can provide 5 Volts DC voltage at a maximum current of 16 Amps. For the motion controller modules listed above, it can provide 5 Volts DC voltage at a maximum of 8 Amps of current, 15 Volts DC voltage at a maximum of 2 Amps of current, -15 Volts DC voltage at a maximum of 2 Amps of current and 24 Volts DC voltage at a maximum of 2.5 Amps of current. When the 1771-PS7 power supply is mounted separately, it can be mounted next to or above the 1771 I/O chassis. When the 1771-PS7 power supply is being mounted within 5 cable-feet, the 1771-PSCC power cable should be used. A generous bend should be left the cable to minimize stress on the cable connectors which connect to the power supply and to the chassis.
Allen Bradley PLC 5 I/O Chasis, 4 Slots, Back Panel, 8.00 x 7.1 x 12.23 in (203 x 180 x 311 mm) Dimensions
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-PSCC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-PSCC such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-PSCC Ser A
|
1771-PSCC/A, Series A, Rev A | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-PSCC |
Module Type | I/O Chasis |
Number of Module I/O Slots | 4 Slots |
Mount Type | Back Panel |
Dimensions | 8.00 x 7.1 x 12.23 in (203 x 180 x 311 mm) |
Weight | 4.1 lbs (1.9 kg) |
Model Status | Earlier Model |
User Output Current | 8 Amps (at 5 V dc), 2 Amps (at +/- 15 V dc), 2.5 Amps (at 24 V dc) |
Backplane Output Current | 16 Amperes (at 5 Volts DC) |
Frequency | 47-63 Hertz |
Fuse | 3 Amperes, 250 Volts, Normal-Blow |
Cabling | 1771-PSCC Remote 5.5 ft |
Paralleled | N/A |
Location | Stand-Alone |
Dimensions | 4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm) |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1771-PSCC |
Module Type | I/O Chasis |
Number of Module I/O Slots | 4 Slots |
Mount Type | Back Panel |
Dimensions | 8.00 x 7.1 x 12.23 in (203 x 180 x 311 mm) |
Weight | 4.1 lbs (1.9 kg) |
Model Status | Earlier Model |
User Output Current | 8 Amps (at 5 V dc), 2 Amps (at +/- 15 V dc), 2.5 Amps (at 24 V dc) |
Backplane Output Current | 16 Amperes (at 5 Volts DC) |
Frequency | 47-63 Hertz |
Fuse | 3 Amperes, 250 Volts, Normal-Blow |
Cabling | 1771-PSCC Remote 5.5 ft |
Paralleled | N/A |
Location | Stand-Alone |
Dimensions | 4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm) |
The Allen-Bradley 1771-PSCC power cable is a power cable used in PLC-5 systems. It is used for connecting Allen-Bradley 1771 I/O racks with 1771-PS7 power supplies or with 1771-PSC power supply chassis. The package containing the 1771-PSCC power cable contains the cable itself, and a plastic bag with 2 cable ties and 2 screws. One cable tie and screw should be used for the provision of strain relief for the weight of power cable on the rack backplane connector. The other cable tie and screw should be used to secure the power cable at the appropriate location in the panel.
The weight of the Allen-Bradley 1771-PSCC power cable is 1 pound. The 1771-PS7 power supply can be used to provide power to 1771 I/O chassis and to IMC 120, 120AR, 121, and 12 motion controller modules. For the 1771 I/O chassis, it can provide 5 Volts DC voltage at a maximum current of 16 Amps. For the motion controller modules listed above, it can provide 5 Volts DC voltage at a maximum of 8 Amps of current, 15 Volts DC voltage at a maximum of 2 Amps of current, -15 Volts DC voltage at a maximum of 2 Amps of current and 24 Volts DC voltage at a maximum of 2.5 Amps of current. When the 1771-PS7 power supply is mounted separately, it can be mounted next to or above the 1771 I/O chassis. When the 1771-PS7 power supply is being mounted within 5 cable-feet, the 1771-PSCC power cable should be used. A generous bend should be left the cable to minimize stress on the cable connectors which connect to the power supply and to the chassis.
Allen Bradley PLC 5 I/O Chasis, 4 Slots, Back Panel, 8.00 x 7.1 x 12.23 in (203 x 180 x 311 mm) Dimensions
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-PSCC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1771-PSCC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 1771-PSCC such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
1771-PSCC Ser A
|
1771-PSCC/A, Series A, Rev A | Request Quote |