1771-RT44 - In Stock | Allen Bradley PLC PLC 5

1771-RT44

Rated 4.5 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1771-RT44

Revisions: Ser A 
Description: The 1771-RT44 RTP device is a remote termination panel that has been manufactured by Allen-Bradley in the PLC 5 series. This remote termination panel does not support cold junction compensation for thermocouple inputs. The 1771-RT44 remote termination panel can be used in any PLC 5 system application except for thermocouple applications. It supports current inputs and it also supports voltage inputs with a resistor. The 1771-RT44 remote termination panel is a general-use type of remote termination panel with 4 channels.
In Stock Ships Today
Request a quote for 1771-RT44

Description: The 1771-RT44 RTP device is a remote termination panel that has been manufactured by Allen-Bradley in the PLC 5 series. This remote termination panel does not support cold junction compensation for thermocouple inputs. The 1771-RT44 remote termination panel can be used in any PLC 5 system application except for thermocouple applications. It supports current inputs and it also supports voltage inputs with a resistor. The 1771-RT44 remote termination panel is a general-use type of remote termination panel with 4 channels.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1771-RT44.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 12 reviews

    Technical Specifications for 1771-RT44

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-RT44
Module TypeRemote Termination Panels and Cables
Number of I/O Modules4 I/O Modules
Cold-Junction-Compensation for Thermocouple InputNo
Usage for Current InputsYes
Usage for Voltage InputsYes, with resistor
Dimensions3.0 x 3.5 x 2.3 in (75 x 89 x 58 mm)
Weight0.3 lbs (0.1 kg)
Wiring Arm1771-WF
Frequency47-63 Hertz
Fuse3 Amperes, 250 Volts, Normal-Blow
Cabling1771-PSCC Remote 5.5 ft
ParalleledN/A
LocationStand-Alone
Dimensions4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm)
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-RT44
Module TypeRemote Termination Panels and Cables
Number of I/O Modules4 I/O Modules
Cold-Junction-Compensation for Thermocouple InputNo
Usage for Current InputsYes
Usage for Voltage InputsYes, with resistor
Dimensions3.0 x 3.5 x 2.3 in (75 x 89 x 58 mm)
Weight0.3 lbs (0.1 kg)
Wiring Arm1771-WF
Frequency47-63 Hertz
Fuse3 Amperes, 250 Volts, Normal-Blow
Cabling1771-PSCC Remote 5.5 ft
ParalleledN/A
LocationStand-Alone
Dimensions4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm)
s

About 1771-RT44

The Allen Bradley 1771-RT44 is a PLC 5 Remote Termination Panel and Cable, equipped with 4 analog inputs and 4 analog outputs. Its operating temperature can go as low as 0 degrees Celsius and as high as 60 degrees Celsius (32 to 140 degrees Fahrenheit), while its storage temperatures lie between -40 and 85 degrees Celsius (-40 to 185 degrees Fahrenheit). Without condensation, the 1771-RT44 can hold a relative humidity anywhere between 5% and 95%. Its dimensions are 3.0 x 3.5 x 2.3 inches (75 x 89 x 58 millimeters), and it weighs approximately 0.3 pounds (0.1 kg)



With an operating shock of 30.0 g (3 pulses, 11 milliseconds), a nonoperating shock of  50.0 g (3 pulses, 11 milliseconds), and an operating frequency of 47 to 63 Hertz, this unit is supplied as open type equipment and comes prepared for use in an industrial environment, though it is not to exceed Pollution 2 (as defined in EN / IEC0664-1) when applied in a Zone 2 environment. This part includes current inputs and can also be used for voltage inputs (with a resistor).



The 1771-RT44 has ESD immunity of 6 kV contact discharges and 8 kV air discharges and should be accessible only by means of the appliance.



Technical Description of 1771-RT44

Allen Bradley PLC 5 Remote Termination Panels and Cables, 4 I/O Modules, Usage for Current Inputs, Usage for Voltage Inputs

Repair Services for 1771-RT44

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1771-RT44. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1771-RT44

Please refer to the manual for more information about the 1771-RT44 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-RT44 Ser A
1771-RT44/A, Series A, Rev A Request Quote
Common misspellings:
  • l771-RT44
  • 177l-RT44
  • 1771-RTA4
  • 1771-RT4A
  • 1771RT44

Dimensions For 1771-RT44

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1771-RT44

Resolutions For 1771-RT44

About

Technical Specifications for 1771-RT44

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-RT44
Module TypeRemote Termination Panels and Cables
Number of I/O Modules4 I/O Modules
Cold-Junction-Compensation for Thermocouple InputNo
Usage for Current InputsYes
Usage for Voltage InputsYes, with resistor
Dimensions3.0 x 3.5 x 2.3 in (75 x 89 x 58 mm)
Weight0.3 lbs (0.1 kg)
Wiring Arm1771-WF
Frequency47-63 Hertz
Fuse3 Amperes, 250 Volts, Normal-Blow
Cabling1771-PSCC Remote 5.5 ft
ParalleledN/A
LocationStand-Alone
Dimensions4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm)
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-RT44
Module TypeRemote Termination Panels and Cables
Number of I/O Modules4 I/O Modules
Cold-Junction-Compensation for Thermocouple InputNo
Usage for Current InputsYes
Usage for Voltage InputsYes, with resistor
Dimensions3.0 x 3.5 x 2.3 in (75 x 89 x 58 mm)
Weight0.3 lbs (0.1 kg)
Wiring Arm1771-WF
Frequency47-63 Hertz
Fuse3 Amperes, 250 Volts, Normal-Blow
Cabling1771-PSCC Remote 5.5 ft
ParalleledN/A
LocationStand-Alone
Dimensions4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm)

About 1771-RT44

The Allen Bradley 1771-RT44 is a PLC 5 Remote Termination Panel and Cable, equipped with 4 analog inputs and 4 analog outputs. Its operating temperature can go as low as 0 degrees Celsius and as high as 60 degrees Celsius (32 to 140 degrees Fahrenheit), while its storage temperatures lie between -40 and 85 degrees Celsius (-40 to 185 degrees Fahrenheit). Without condensation, the 1771-RT44 can hold a relative humidity anywhere between 5% and 95%. Its dimensions are 3.0 x 3.5 x 2.3 inches (75 x 89 x 58 millimeters), and it weighs approximately 0.3 pounds (0.1 kg)



With an operating shock of 30.0 g (3 pulses, 11 milliseconds), a nonoperating shock of  50.0 g (3 pulses, 11 milliseconds), and an operating frequency of 47 to 63 Hertz, this unit is supplied as open type equipment and comes prepared for use in an industrial environment, though it is not to exceed Pollution 2 (as defined in EN / IEC0664-1) when applied in a Zone 2 environment. This part includes current inputs and can also be used for voltage inputs (with a resistor).



The 1771-RT44 has ESD immunity of 6 kV contact discharges and 8 kV air discharges and should be accessible only by means of the appliance.



Technical Description of 1771-RT44

Allen Bradley PLC 5 Remote Termination Panels and Cables, 4 I/O Modules, Usage for Current Inputs, Usage for Voltage Inputs
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1771-RT44. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1771-RT44. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1771-RT44 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-RT44 Ser A
1771-RT44/A, Series A, Rev A Request Quote

Common misspellings:
  • l771-RT44
  • 177l-RT44
  • 1771-RTA4
  • 1771-RT4A
  • 1771RT44
PDF