1771-RTP1 - In Stock | Allen Bradley PLC PLC 5

1771-RTP1

Rated 4.7 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1771-RTP1

Revisions: Ser A 
Description: Allen Bradley PLC 5 Remote Termination Panels and Cables, 8 I/O Modules, Cold-Junction-Compensation for Thermocouple Input, Usage for Voltage Inputs
In Stock Ships Today
Request a quote for 1771-RTP1

Description: Allen Bradley PLC 5 Remote Termination Panels and Cables, 8 I/O Modules, Cold-Junction-Compensation for Thermocouple Input, Usage for Voltage Inputs

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1771-RTP1.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 5 reviews

    Technical Specifications for 1771-RTP1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-RTP1
Module TypeRemote Termination Panels and Cables
Number of I/O Modules8 I/O Modules
Cold-Junction-Compensation for Thermocouple InputYes
Usage for Current InputsNo
Usage for Voltage InputsYes, with resistor
Dimensions3.0 x 5.3 x 2.3 in (75 x 135 x 58 mm)
Weight0.6 lbs (0.3 kg)
Wiring Arm1771-WF
Frequency47-63 Hertz
Fuse3 Amperes, 250 Volts, Normal-Blow
Cabling1771-PSCC Remote 5.5 ft
ParalleledN/A
LocationStand-Alone
Dimensions4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm)
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-RTP1
Module TypeRemote Termination Panels and Cables
Number of I/O Modules8 I/O Modules
Cold-Junction-Compensation for Thermocouple InputYes
Usage for Current InputsNo
Usage for Voltage InputsYes, with resistor
Dimensions3.0 x 5.3 x 2.3 in (75 x 135 x 58 mm)
Weight0.6 lbs (0.3 kg)
Wiring Arm1771-WF
Frequency47-63 Hertz
Fuse3 Amperes, 250 Volts, Normal-Blow
Cabling1771-PSCC Remote 5.5 ft
ParalleledN/A
LocationStand-Alone
Dimensions4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm)
s

About 1771-RTP1

The 1771-RTP1 PLC 5 Remote Termination Panel and Cable by Allen Bradley contains a Cold Junction Compensation for Thermocouple Input feature; it can be used for Voltage inputs when accompanied by a resistor, and additionally contains eight analog inputs and eight analog outputs.



This part follows several particular EMC standards, namely EN 50081-2 EMC - Generic Emission Standard, Part 2 - Industrial Environment and EN 50082-2 EMC – Generic Immunity Standard, Part 2 - Industrial Environment.



An electric arc can occur if cables are being connected or disconnected while power is being applied to the module or to any device on the network. To avoid this, cut all power on the network before proceeding.



The 1771-RTP1 unit has a number of agency certifications, including Groups A, B, C, D (UL 1604, C-UL under CSA C22.2 no. 213) and UL 508,  C-UL under CSA C22.2 no. 142, Class I, Div. 2.



With an ED immunity of 6 kV on contact and 8 kV through the air, this unit can operate at temperatures as high as 140 degrees Fahrenheit and as low as 32, and can be stored anywhere in the temperature range of -40 to 185 degrees Fahrenheit and up to 95% humidity without condensing. It weighs around 0.6 pounds (0.3 kilograms) with a size of  4.5 x 12.4 x 6.3 inches (115 x 317 x 160 millimeters).



Repair Services for 1771-RTP1

Type Lead Time Price Action
Repair Service 2-4 weeks $365cartAdd to Cart

Our highly skilled technicians can repair your 1771-RTP1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1771-RTP1

Please refer to the manual for more information about the 1771-RTP1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-RTP1 Ser A
1771-RTP1/A, Series A, Rev A Request Quote
Common misspellings:
  • l771-RTP1
  • 177l-RTP1
  • 1771-RTPl
  • 1771RTP1

Dimensions For 1771-RTP1

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1771-RTP1

Resolutions For 1771-RTP1

About

Technical Specifications for 1771-RTP1

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-RTP1
Module TypeRemote Termination Panels and Cables
Number of I/O Modules8 I/O Modules
Cold-Junction-Compensation for Thermocouple InputYes
Usage for Current InputsNo
Usage for Voltage InputsYes, with resistor
Dimensions3.0 x 5.3 x 2.3 in (75 x 135 x 58 mm)
Weight0.6 lbs (0.3 kg)
Wiring Arm1771-WF
Frequency47-63 Hertz
Fuse3 Amperes, 250 Volts, Normal-Blow
Cabling1771-PSCC Remote 5.5 ft
ParalleledN/A
LocationStand-Alone
Dimensions4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm)
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1771-RTP1
Module TypeRemote Termination Panels and Cables
Number of I/O Modules8 I/O Modules
Cold-Junction-Compensation for Thermocouple InputYes
Usage for Current InputsNo
Usage for Voltage InputsYes, with resistor
Dimensions3.0 x 5.3 x 2.3 in (75 x 135 x 58 mm)
Weight0.6 lbs (0.3 kg)
Wiring Arm1771-WF
Frequency47-63 Hertz
Fuse3 Amperes, 250 Volts, Normal-Blow
Cabling1771-PSCC Remote 5.5 ft
ParalleledN/A
LocationStand-Alone
Dimensions4.5 x 12.4 x 6.3 in (115 x 317 x 160 mm)

About 1771-RTP1

The 1771-RTP1 PLC 5 Remote Termination Panel and Cable by Allen Bradley contains a Cold Junction Compensation for Thermocouple Input feature; it can be used for Voltage inputs when accompanied by a resistor, and additionally contains eight analog inputs and eight analog outputs.



This part follows several particular EMC standards, namely EN 50081-2 EMC - Generic Emission Standard, Part 2 - Industrial Environment and EN 50082-2 EMC – Generic Immunity Standard, Part 2 - Industrial Environment.



An electric arc can occur if cables are being connected or disconnected while power is being applied to the module or to any device on the network. To avoid this, cut all power on the network before proceeding.



The 1771-RTP1 unit has a number of agency certifications, including Groups A, B, C, D (UL 1604, C-UL under CSA C22.2 no. 213) and UL 508,  C-UL under CSA C22.2 no. 142, Class I, Div. 2.



With an ED immunity of 6 kV on contact and 8 kV through the air, this unit can operate at temperatures as high as 140 degrees Fahrenheit and as low as 32, and can be stored anywhere in the temperature range of -40 to 185 degrees Fahrenheit and up to 95% humidity without condensing. It weighs around 0.6 pounds (0.3 kilograms) with a size of  4.5 x 12.4 x 6.3 inches (115 x 317 x 160 millimeters).



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $365cartAdd to Cart

Our highly skilled technicians can repair your 1771-RTP1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $365cartAdd to Cart

Our highly skilled technicians can repair your 1771-RTP1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1771-RTP1 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1771-RTP1 Ser A
1771-RTP1/A, Series A, Rev A Request Quote

Common misspellings:
  • l771-RTP1
  • 177l-RTP1
  • 1771-RTPl
  • 1771RTP1
PDF