Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PLC 5 1771N-4DDDDNNNN

Product image is representative; revision or series may vary. Contact us to request a specific version.

1771N-4DDDDNNNN

|
Need a Specific Revision?

The Allen-Bradley 1771N-4DDDDNNNN module is a UL listed I/O module. It is used with the Allen-Bradley 1395 drives.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1771N-4DDDDNNNN

ManufacturerAllen Bradley
CategoryPLCs
Product LinePLC 5
Part Number1771N-4DDDDNNNN
Weight3.50 lbs (1.59 kg)
DescriptionInput/outout module
Voltage10 V
Current25 mA
SeriesA
StandardUL, CE
Temperature0-60 degrees Celsius
AC signal delay45 ms
DC signal delay50 ms
Resistance1 K ohm
Wiring arm1771-WH
Request a Repair

The 1771N-4DDDDNNNN module is a high-resolution input/output module by Allen-Bradley. It comes with an input voltage rating of 10 volts. The output current rating of the module is 25 milliAmps. It is a Series A device and it has a backplane current rating of 2.2 Amps. The module has been listed with UL standards. The module comes with 4-channel input and 4-channel output systems. The module supports the binary data format or BDC format for data processing. All the processing on the module is handled by a built-in microprocessor. The 1771N-4DDDDNNNN module helps connect the analog signal to the programmable logic controller. The output voltage protection of the module is maintained at 140 Volts AC and it comes with a drift offset of different levels. The module is certified with the UL and CE standards. It meets all the specifications of the EMC directive. The operating temperature is set between 0 and 60 degrees Celsius in an environment with the right level of humidity.

The Allen-Bradley 1771N-4DDDDNNNN I/O module is equipped with a digital to analog converter which is capable of a handling time of 500 microseconds. The module provides 45 milliseconds of AC signal delay time and a 50 milliseconds of typical DC signal delay time. It can also drive circuits which come with a resistance rating of more than 1 kiloohm. The 1771N-4DDDDNNNN module uses the Allen-Bradley 1771-WH wiring arm for operation. It is an intelligent I/O module located inside the 1395 drive that hosts it. The module should be used in indoor locations only. It is not water-resistant. It is fully compatible with the Allen-Bradley PLC 3, PLC 5, and the PLC 5/20 controller systems.