DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1784-CP. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-CP |
Description | Controller cable |
Weight | 0.92 lbs |
Temperature | 0-60 degrees Celsius |
Storage Temperature | -40-85 degrees Celsius |
Length | 3.2 meters |
Primary Connections | PLC 5 Processor Connections |
Ambient Non-Condensing Humidity | 5 to 95% |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-CP |
Description | Controller cable |
Weight | 0.92 lbs |
Temperature | 0-60 degrees Celsius |
Storage Temperature | -40-85 degrees Celsius |
Length | 3.2 meters |
Primary Connections | PLC 5 Processor Connections |
Ambient Non-Condensing Humidity | 5 to 95% |
The 1784-CP cable is a classic PLC 5 Controller Series B cable by Allen-Bradley/Rockwell Automation. The cable is a HD62 male to DB9 male connector cable. It is mainly used to connect devices to a PLC 5 processor by using the DB9 style DH+ connector. The cable weighs 0.92 pounds. The connector also helps to connect a personal computer to a communication interface. The operating temperature of the cable should lie between 0 and 60 degrees Celsius. When not in use, it can be stored at a temperature between -40 and 85 degrees Celsius. The humidity of the environment should be between 5 and 95% without condensation. The 1784-CP cable is 3.2 meters in length. The PLC processor is a high-speed processor that is used for I/O requirements and to coordinate with other devices.
The processor that is connected to the 1784-CP cable is available with a wide range of memory capacities. It can also control remote I/O. The processor is equipped with ports which can be configured by using a DH+ communication link or a universal remote link. One end of the 1784-CP cable is connected to the PLC device and the other end is connected to the industrial terminal. The PLC 5 terminal end has a PIN 9 and PIN 6 connector and the connector cable has a PIN 5 and PIN 1 connector. Similarly, the industrial terminal has 6 connectors like the PIN 1, 22, 43, 62, 42, and 21 connectors which are connected to the cable. The 1784-CP cable should be kept away from heat-generating devices. Excessive amounts of exposure to heat may damage the cable or reduce the efficiency of the cable.
The 1784-CP cable is a PLC 5 controller cable. It weighs 0.92 pounds.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1784-CP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-CP |
Description | Controller cable |
Weight | 0.92 lbs |
Temperature | 0-60 degrees Celsius |
Storage Temperature | -40-85 degrees Celsius |
Length | 3.2 meters |
Primary Connections | PLC 5 Processor Connections |
Ambient Non-Condensing Humidity | 5 to 95% |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-CP |
Description | Controller cable |
Weight | 0.92 lbs |
Temperature | 0-60 degrees Celsius |
Storage Temperature | -40-85 degrees Celsius |
Length | 3.2 meters |
Primary Connections | PLC 5 Processor Connections |
Ambient Non-Condensing Humidity | 5 to 95% |
The 1784-CP cable is a classic PLC 5 Controller Series B cable by Allen-Bradley/Rockwell Automation. The cable is a HD62 male to DB9 male connector cable. It is mainly used to connect devices to a PLC 5 processor by using the DB9 style DH+ connector. The cable weighs 0.92 pounds. The connector also helps to connect a personal computer to a communication interface. The operating temperature of the cable should lie between 0 and 60 degrees Celsius. When not in use, it can be stored at a temperature between -40 and 85 degrees Celsius. The humidity of the environment should be between 5 and 95% without condensation. The 1784-CP cable is 3.2 meters in length. The PLC processor is a high-speed processor that is used for I/O requirements and to coordinate with other devices.
The processor that is connected to the 1784-CP cable is available with a wide range of memory capacities. It can also control remote I/O. The processor is equipped with ports which can be configured by using a DH+ communication link or a universal remote link. One end of the 1784-CP cable is connected to the PLC device and the other end is connected to the industrial terminal. The PLC 5 terminal end has a PIN 9 and PIN 6 connector and the connector cable has a PIN 5 and PIN 1 connector. Similarly, the industrial terminal has 6 connectors like the PIN 1, 22, 43, 62, 42, and 21 connectors which are connected to the cable. The 1784-CP cable should be kept away from heat-generating devices. Excessive amounts of exposure to heat may damage the cable or reduce the efficiency of the cable.
The 1784-CP cable is a PLC 5 controller cable. It weighs 0.92 pounds.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1784-CP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1784-CP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.