DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1784-KR module is a module from Allen-Bradley whch enables interfacing with DH-485 networks for industrial computers. It is a module which is installed on IBM AT/XT compatible computers.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1784-KR. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-KR |
Product type | DH-485 interface module |
Compatibility | IBM XT / AT computers |
PC to cable isolation | 500 Volts DC |
Power requirement | 1.8 Amps at 5 Volts DC |
Operating temperature | 0 to 60 degrees Celsius |
RS-485 interface | Yes |
Baud rates | 300, 1200, 2400, 4800, 9600, 19200 baud |
Maximum link length | 4000 feet |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-KR |
Product type | DH-485 interface module |
Compatibility | IBM XT / AT computers |
PC to cable isolation | 500 Volts DC |
Power requirement | 1.8 Amps at 5 Volts DC |
Operating temperature | 0 to 60 degrees Celsius |
RS-485 interface | Yes |
Baud rates | 300, 1200, 2400, 4800, 9600, 19200 baud |
Maximum link length | 4000 feet |
The Allen-Bradley 1784-KR module is a module which enables IBM XT and AT compatible computers to communicate over Allen-Bradley DH-485 networks. The 1784-KR module is a half-slot module that can be installed in any expansion slot (except the J8 slot) on an IBM XT or AT compatible computer. The 1784-KR modules enables the IBM XT or AT compatible computers to communicate with Allen-Bradley SLC-500 programmable controllers over DH-485 links. All the IBM XT or AT compatible computers with the 1784-KR module can also communicate with a single SLC-500 device via a point to point cable link.
The 1784-KR module provides 500 Volts DC isolation voltage between the PC and communication cable to protect the PC. The 1784-KR module is compatible with the IBM XT/AT systems, Compaq Deskpro 386 systems, and the Allen-Bradley T50, T35, 6120, 6121, and 6122 systems. The output connector on the 1784-KR module is a 6-position terminal block header. There is an RS-485 output on the module. The hardware interrupts supported by the module include the IRQ2, IRQ3, IRQ4, and IRQ5 interrupts. Baud rates supported by the 1784-KR module include 300, 1200, 2400, 4800, 9600, and 19,200 baud. The maximum line length is 4000 feet. The module power requirements are 1.8 Amps at 5 Volts DC. The operating temperature range for the module is 0 to 60 degrees Celsius.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1784-KR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-KR |
Product type | DH-485 interface module |
Compatibility | IBM XT / AT computers |
PC to cable isolation | 500 Volts DC |
Power requirement | 1.8 Amps at 5 Volts DC |
Operating temperature | 0 to 60 degrees Celsius |
RS-485 interface | Yes |
Baud rates | 300, 1200, 2400, 4800, 9600, 19200 baud |
Maximum link length | 4000 feet |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-KR |
Product type | DH-485 interface module |
Compatibility | IBM XT / AT computers |
PC to cable isolation | 500 Volts DC |
Power requirement | 1.8 Amps at 5 Volts DC |
Operating temperature | 0 to 60 degrees Celsius |
RS-485 interface | Yes |
Baud rates | 300, 1200, 2400, 4800, 9600, 19200 baud |
Maximum link length | 4000 feet |
The Allen-Bradley 1784-KR module is a module which enables IBM XT and AT compatible computers to communicate over Allen-Bradley DH-485 networks. The 1784-KR module is a half-slot module that can be installed in any expansion slot (except the J8 slot) on an IBM XT or AT compatible computer. The 1784-KR modules enables the IBM XT or AT compatible computers to communicate with Allen-Bradley SLC-500 programmable controllers over DH-485 links. All the IBM XT or AT compatible computers with the 1784-KR module can also communicate with a single SLC-500 device via a point to point cable link.
The 1784-KR module provides 500 Volts DC isolation voltage between the PC and communication cable to protect the PC. The 1784-KR module is compatible with the IBM XT/AT systems, Compaq Deskpro 386 systems, and the Allen-Bradley T50, T35, 6120, 6121, and 6122 systems. The output connector on the 1784-KR module is a 6-position terminal block header. There is an RS-485 output on the module. The hardware interrupts supported by the module include the IRQ2, IRQ3, IRQ4, and IRQ5 interrupts. Baud rates supported by the 1784-KR module include 300, 1200, 2400, 4800, 9600, and 19,200 baud. The maximum line length is 4000 feet. The module power requirements are 1.8 Amps at 5 Volts DC. The operating temperature range for the module is 0 to 60 degrees Celsius.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1784-KR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1784-KR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.