1784-KT - In Stock | Allen Bradley PLC PLC 5

1784-KT

Rated 5 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1784-KT

Description: The Allen-Bradley 1784-KT module is a module which is installed in personal computers and allows for interfacing with DH+ networks. The 1784-KT module is an ISA card which can be installed in 8-bit and 16-bit ISA slots.
In Stock Ships Today
Request a quote for 1784-KT

Description:

The Allen-Bradley 1784-KT module is a module which is installed in personal computers and allows for interfacing with DH+ networks. The 1784-KT module is an ISA card which can be installed in 8-bit and 16-bit ISA slots.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1784-KT.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 16 reviews

    Technical Specifications for 1784-KT

BrandAllen-Bradley / Rockwell Automation
SeriesPLC 5
Part Number1784-KT
Product typeDH+ interface module
CompatabilityComputers, workstations, terminals
Card typeISA card
InterfacesDH+, PLC-2 serial, PLC-3 serial
Power requirement0.4 Amps at 5 Volts DC, 0.04 Amps at ±12 Volts DC
Operating temperature32 to 130 degrees Fahrenheit
Humidity5 to 95%
Synchronous data rate for DH+57.6 Kbaud
UPC10612598118882
BrandAllen-Bradley / Rockwell Automation
SeriesPLC 5
Part Number1784-KT
Product typeDH+ interface module
CompatabilityComputers, workstations, terminals
Card typeISA card
InterfacesDH+, PLC-2 serial, PLC-3 serial
Power requirement0.4 Amps at 5 Volts DC, 0.04 Amps at ±12 Volts DC
Operating temperature32 to 130 degrees Fahrenheit
Humidity5 to 95%
Synchronous data rate for DH+57.6 Kbaud
UPC10612598118882
s

About 1784-KT

The Allen-Bradley 1784-KT module is a module which allows terminals, workstations, and personal computers to communicate with Allen-Bradley controllers and processors over the DH+ network or over direct connections. The 1784-KT module is a half-size 8-bit ISA card that can be installed in any 16-bit or 8-bit ISA expansion slot. The 1784-KT module enables a computer to act as an active node on the DH+ networks, increases the application response by providing higher throughput compared to the RS-232 network, and it enables a single cable connection to the PLC-5, PLC-3, and PLC-2 controllers.



 



The 1784-KT module has been tested with the numerous systems. The output connector on the 1784-KT module is a 62-pin D-shell connector. The outputs available on the 1784-KT module include the DH+, PLC-3 serial interface, and the PLC-2 serial interface output. The hardware interrupts supported by the 1784-KT module are the IRQ3 (Com 2), IRQ4, IRQ5, and IRQ7 interrupts. The asynchronous connections to the PLC-2/PLC-3 controllers supports 9600 and 19,200 baud. The synchronous data rated for the DH+ is 57.6 Kbaud. The power requirements of the 1784-KT module are 0.4 Amps at 5 Volts DC and 0.04 Amps at ±12 Volts DC. The respective power consumption levels are 2 Watts and 0.48 Watts, respectively. The recommended relative humidity range is 5 to 95%, and the working temperature range for the module is from 32 to 130 degrees Fahrenheit.

Repair Services for 1784-KT

Type Lead Time Price Action
Repair Service 2-4 weeks $88cartAdd to Cart

Our highly skilled technicians can repair your 1784-KT. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1784-KT

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1784-KT

Resolutions For 1784-KT

About

Technical Specifications for 1784-KT

BrandAllen-Bradley / Rockwell Automation
SeriesPLC 5
Part Number1784-KT
Product typeDH+ interface module
CompatabilityComputers, workstations, terminals
Card typeISA card
InterfacesDH+, PLC-2 serial, PLC-3 serial
Power requirement0.4 Amps at 5 Volts DC, 0.04 Amps at ±12 Volts DC
Operating temperature32 to 130 degrees Fahrenheit
Humidity5 to 95%
Synchronous data rate for DH+57.6 Kbaud
UPC10612598118882
BrandAllen-Bradley / Rockwell Automation
SeriesPLC 5
Part Number1784-KT
Product typeDH+ interface module
CompatabilityComputers, workstations, terminals
Card typeISA card
InterfacesDH+, PLC-2 serial, PLC-3 serial
Power requirement0.4 Amps at 5 Volts DC, 0.04 Amps at ±12 Volts DC
Operating temperature32 to 130 degrees Fahrenheit
Humidity5 to 95%
Synchronous data rate for DH+57.6 Kbaud
UPC10612598118882

About 1784-KT

The Allen-Bradley 1784-KT module is a module which allows terminals, workstations, and personal computers to communicate with Allen-Bradley controllers and processors over the DH+ network or over direct connections. The 1784-KT module is a half-size 8-bit ISA card that can be installed in any 16-bit or 8-bit ISA expansion slot. The 1784-KT module enables a computer to act as an active node on the DH+ networks, increases the application response by providing higher throughput compared to the RS-232 network, and it enables a single cable connection to the PLC-5, PLC-3, and PLC-2 controllers.



 



The 1784-KT module has been tested with the numerous systems. The output connector on the 1784-KT module is a 62-pin D-shell connector. The outputs available on the 1784-KT module include the DH+, PLC-3 serial interface, and the PLC-2 serial interface output. The hardware interrupts supported by the 1784-KT module are the IRQ3 (Com 2), IRQ4, IRQ5, and IRQ7 interrupts. The asynchronous connections to the PLC-2/PLC-3 controllers supports 9600 and 19,200 baud. The synchronous data rated for the DH+ is 57.6 Kbaud. The power requirements of the 1784-KT module are 0.4 Amps at 5 Volts DC and 0.04 Amps at ±12 Volts DC. The respective power consumption levels are 2 Watts and 0.48 Watts, respectively. The recommended relative humidity range is 5 to 95%, and the working temperature range for the module is from 32 to 130 degrees Fahrenheit.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $88cartAdd to Cart

Our highly skilled technicians can repair your 1784-KT. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $88cartAdd to Cart

Our highly skilled technicians can repair your 1784-KT. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF