DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1784-KTC module is a module from Allen-Bradley designed to provide a ControlNet interface for comptuers. The 1784-KTC module is installed in a 32-bit EISA-compatible or 16-bit ISA-compatible computer.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1784-KTC. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-KTC |
Product type | ControlNet interface module |
Compatibility | 16-bit ISA / 32-bit EISA |
Cable | 1785-CP |
Data rate | 5 Mbps |
Network Update Time | 2 to 100 milliseconds |
Maximum Nodes per Link without a Repeater | 48 |
Maximum Nodes per Link with a Repeater | 107 |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-KTC |
Product type | ControlNet interface module |
Compatibility | 16-bit ISA / 32-bit EISA |
Cable | 1785-CP |
Data rate | 5 Mbps |
Network Update Time | 2 to 100 milliseconds |
Maximum Nodes per Link without a Repeater | 48 |
Maximum Nodes per Link with a Repeater | 107 |
The Allen Bradley 1784-KTC module is a module which enables a 16-bit ISA or a 32-bit EISA-compatible computer to communicate on Allen-Bradley ControlNet networks. A programming terminal can be connected to a ControlNet PLC-5 processor through DH+, serial, or ControlNet connection. Different types of ControlNet RG-6 quad-shield cables can be used with the 1784-KTC module depending on the application. The ControlNet cables available from Allen-Bradley include the 1786-CTK cable which is a ControlNet coax took kit, the 1786-RPT and 1786 RPTD cables which are repeaters, the 1786-RG6 cable which is a RG-6 quad shield cable, the 1786-TPR, 1786 TPS, 1786 TPYR and 1786-TPYS cables which are coax tap kits, and the 1786-BNCP, 1786-BNC, 1786-BNCJ, and 1785-BNCI cables which have BNC connectors.
Specifications related to the Allen-Bradley ControlNet networks that the 1784-KTC module is compatible with include a 5 Mbps data transmission rate, 2 to 100 milliseconds of network update time, a maximum of 48 nodes per link without a repeater (with 250 meters of cable length), and a maximum of 107 nodes per link with repeaters. The specifications for the maximum cable length without repeaters are as follows: 1000 meters with 2 nodes, 500 meters with 32 nodes, and 250 meters with 48 nodes. The specifications for the maximum cable length with repeaters are as follows: 6000 meters with 2 nodes and the typical link length is 3000 meters. The maximum number of repeaters in a series per link are 5 and the maximum number of segments in series per link are 6.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1784-KTC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-KTC |
Product type | ControlNet interface module |
Compatibility | 16-bit ISA / 32-bit EISA |
Cable | 1785-CP |
Data rate | 5 Mbps |
Network Update Time | 2 to 100 milliseconds |
Maximum Nodes per Link without a Repeater | 48 |
Maximum Nodes per Link with a Repeater | 107 |
Brand | Allen-Bradley / Rockwell Automation |
Series | PLC 5 |
Part Number | 1784-KTC |
Product type | ControlNet interface module |
Compatibility | 16-bit ISA / 32-bit EISA |
Cable | 1785-CP |
Data rate | 5 Mbps |
Network Update Time | 2 to 100 milliseconds |
Maximum Nodes per Link without a Repeater | 48 |
Maximum Nodes per Link with a Repeater | 107 |
The Allen Bradley 1784-KTC module is a module which enables a 16-bit ISA or a 32-bit EISA-compatible computer to communicate on Allen-Bradley ControlNet networks. A programming terminal can be connected to a ControlNet PLC-5 processor through DH+, serial, or ControlNet connection. Different types of ControlNet RG-6 quad-shield cables can be used with the 1784-KTC module depending on the application. The ControlNet cables available from Allen-Bradley include the 1786-CTK cable which is a ControlNet coax took kit, the 1786-RPT and 1786 RPTD cables which are repeaters, the 1786-RG6 cable which is a RG-6 quad shield cable, the 1786-TPR, 1786 TPS, 1786 TPYR and 1786-TPYS cables which are coax tap kits, and the 1786-BNCP, 1786-BNC, 1786-BNCJ, and 1785-BNCI cables which have BNC connectors.
Specifications related to the Allen-Bradley ControlNet networks that the 1784-KTC module is compatible with include a 5 Mbps data transmission rate, 2 to 100 milliseconds of network update time, a maximum of 48 nodes per link without a repeater (with 250 meters of cable length), and a maximum of 107 nodes per link with repeaters. The specifications for the maximum cable length without repeaters are as follows: 1000 meters with 2 nodes, 500 meters with 32 nodes, and 250 meters with 48 nodes. The specifications for the maximum cable length with repeaters are as follows: 6000 meters with 2 nodes and the typical link length is 3000 meters. The maximum number of repeaters in a series per link are 5 and the maximum number of segments in series per link are 6.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1784-KTC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1784-KTC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.